On Tue, Dec 01, 2015 at 03:08:31PM +0200, ville.syrjala@xxxxxxxxxxxxxxx wrote: > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > I was trying to get to the bottom of the FDI fails on Brix Pro, and > thus eneded up going through the entire PCH modeset stuff for HSW. > While I did find a bunch of stuff missing/wrong, sadly I wasn't able > to make FDI training succeed on that machine. So in the end I simply > had to resort to getting rid of the CRT connector. And to add insult > to injury, the only way I could do that is to look at the VBT :( > > Anwyay, here are the fruits of my labor. The whole thing is available > here: > git://github.com/vsyrjala/linux.git hsw_pch_fixes > > Ville Syrjälä (10): > drm/i915: Don't register the CRT connector when it's fused off > drm/i915: Don't register CRT connectro when DDI E can't be used > drm/i915: Check VBT for CRT port presence on HSW/BDW > drm/i915: Add "missing" break to haswell_get_ddi_pll() > drm/i915: Disable CLKOUT_DP bending on LPT/WPT as needed > drm/i915: Round to closest when computing the VGA dotclock for LPT-H > drm/i915: Disable FDI after the CRT port on LPT-H > drm/i915: Refactor LPT-H VGA dotclock disabling > drm/i915: Disable LPT-H VGA dotclock during crtc disable > drm/i915: Leave FDI running after failed link training on LPT-H Entire series now pushed to dinq. Thanks for the reviews. > > drivers/gpu/drm/i915/i915_reg.h | 4 +- > drivers/gpu/drm/i915/intel_ddi.c | 24 ++++--- > drivers/gpu/drm/i915/intel_display.c | 123 ++++++++++++++++++++++++++++------- > 3 files changed, 117 insertions(+), 34 deletions(-) > > -- > 2.4.10 -- Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
