2015-12-04 18:19 GMT-02:00 <ville.syrjala@xxxxxxxxxxxxxxx>:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> When we want to use SPLL for FDI we want SSC, which means we have to
> disable clock bending for the PCH SSC reference (bend and spread are
> mutually exclusive). So let's turn off bending when we want spread.
> In case the BIOS enabled clock bending for some reason we'll just turn
> it off and enable the spread mode instead.
>
> Not sure what happens if the BIOS is actually using the bend source for
> HDMI at this time, but I suppose it should be no worse than what already
> happens when we simply turn on the spread.
>
> We don't currently use the bend source for anything, and only use the
> PCH SSC reference for the SPLL to drive FDI (always with spread).
>
> v2: Fix the %5 vs %10 fumble for SSCDITHPHASE (Paulo)
> Add 'WARN_ON(steps % 5 != 0)' sanity check (Paulo)
> Fix typos in commit message (Paulo)
>
> Cc: Paulo Zanoni <przanoni@xxxxxxxxx>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 2 ++
> drivers/gpu/drm/i915/intel_display.c | 67 ++++++++++++++++++++++++++++++++++--
> 2 files changed, 67 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 1dae5ac3e0b1..d0ea877011c1 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7327,6 +7327,7 @@ enum skl_disp_power_wells {
> #define SBI_READY (0x0<<0)
>
> /* SBI offsets */
> +#define SBI_SSCDIVINTPHASE 0x0200
> #define SBI_SSCDIVINTPHASE6 0x0600
> #define SBI_SSCDIVINTPHASE_DIVSEL_MASK ((0x7f)<<1)
> #define SBI_SSCDIVINTPHASE_DIVSEL(x) ((x)<<1)
> @@ -7334,6 +7335,7 @@ enum skl_disp_power_wells {
> #define SBI_SSCDIVINTPHASE_INCVAL(x) ((x)<<8)
> #define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15)
> #define SBI_SSCDIVINTPHASE_PROPAGATE (1<<0)
> +#define SBI_SSCDITHPHASE 0x0204
> #define SBI_SSCCTL 0x020c
> #define SBI_SSCCTL6 0x060C
> #define SBI_SSCCTL_PATHALT (1<<3)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 61000ff524f1..3811bcb73229 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -8564,6 +8564,67 @@ static void lpt_disable_clkout_dp(struct drm_device *dev)
> mutex_unlock(&dev_priv->sb_lock);
> }
>
> +#define BEND_IDX(steps) ((50 + (steps)) / 5)
> +
> +static const uint16_t sscdivintphase[] = {
> + [BEND_IDX( 50)] = 0x3B23,
> + [BEND_IDX( 45)] = 0x3B23,
> + [BEND_IDX( 40)] = 0x3C23,
> + [BEND_IDX( 35)] = 0x3C23,
> + [BEND_IDX( 30)] = 0x3D23,
> + [BEND_IDX( 25)] = 0x3D23,
> + [BEND_IDX( 20)] = 0x3E23,
> + [BEND_IDX( 15)] = 0x3E23,
> + [BEND_IDX( 10)] = 0x3F23,
> + [BEND_IDX( 5)] = 0x3F23,
> + [BEND_IDX( 0)] = 0x0025,
> + [BEND_IDX( -5)] = 0x0025,
> + [BEND_IDX(-10)] = 0x0125,
> + [BEND_IDX(-15)] = 0x0125,
> + [BEND_IDX(-20)] = 0x0225,
> + [BEND_IDX(-25)] = 0x0225,
> + [BEND_IDX(-30)] = 0x0325,
> + [BEND_IDX(-35)] = 0x0325,
> + [BEND_IDX(-40)] = 0x0425,
> + [BEND_IDX(-45)] = 0x0425,
> + [BEND_IDX(-50)] = 0x0525,
> +};
> +
> +/*
> + * Bend CLKOUT_DP
> + * steps -50 to 50 inclusive, in steps of 5
> + * < 0 slow down the clock, > 0 speed up the clock, 0 == no bend (135MHz)
> + * change in clock period = -(steps / 10) * 5.787 ps
> + */
> +static void lpt_bend_clkout_dp(struct drm_i915_private *dev_priv, int steps)
> +{
> + uint32_t tmp;
> + int idx = BEND_IDX(steps);
> +
> + if (WARN_ON(steps % 5 != 0))
> + return;
> +
> + if (WARN_ON(idx >= ARRAY_SIZE(sscdivintphase)))
> + return;
> +
> + mutex_lock(&dev_priv->sb_lock);
> +
> + if (steps % 10 != 0)
> + tmp = 0xAAAAAAAB;
> + else
> + tmp = 0x00000000;
> + intel_sbi_write(dev_priv, SBI_SSCDITHPHASE, tmp, SBI_ICLK);
> +
> + tmp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE, SBI_ICLK);
> + tmp &= 0xffff0000;
> + tmp |= sscdivintphase[idx];
> + intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE, tmp, SBI_ICLK);
> +
> + mutex_unlock(&dev_priv->sb_lock);
> +}
> +
> +#undef BEND_IDX
> +
> static void lpt_init_pch_refclk(struct drm_device *dev)
> {
> struct intel_encoder *encoder;
> @@ -8579,10 +8640,12 @@ static void lpt_init_pch_refclk(struct drm_device *dev)
> }
> }
>
> - if (has_vga)
> + if (has_vga) {
> + lpt_bend_clkout_dp(to_i915(dev), 0);
> lpt_enable_clkout_dp(dev, true, true);
> - else
> + } else {
> lpt_disable_clkout_dp(dev);
> + }
> }
>
> /*
> --
> 2.4.10
>
--
Paulo Zanoni
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
