On Tue, Dec 01, 2015 at 10:35:59AM +0000, Tvrtko Ursulin wrote:
>
> Hi,
>
> Just one comment deep down.
>
> On 30/11/15 18:22, Vinay Belgaumkar wrote:
> >These tests exercise the userptr ioctl to create shared buffers
> >between CPU and GPU. They contain error and normal usage scenarios.
> >They also contain a couple of stress tests which copy buffers between
> >CPU and GPU. These tests rely on the softpin patch in order to pin buffers
> >to a certain VA.
> >
> >Caveat: These tests were designed to run on 64-bit system. Future work
> >includes adding logic to ensure these tests can run on 32-bit systems with
> >PPGTT support. Some tests are currently disabled for 32-bit systems for that
> >reason.
> >
> >v2: Added cc and signed-off-by fields
> >
> >v3: Fixed review comments, added helper functions. Removed userptr error
> >scenarios covered by existing userptr tests. Modified stress test to have
> >100K buffers, it now runs for ~30 mins, checks every element has been written
> >to correctly, and pins buffers at different VMAs.
> >
> >v4: Changed name to gem_softpin
> >
> >v5: More fixes. Removed the file based tests, will move them to userptr tests.
> >Added a function that validates appropriate PPGTT support before running tests.
> >Optimized stack space and memory footprint in stress test. Removed the eviction
> >test, will add it back after verifying proper functionality.
> >
> >v6: Split basic test into userptr and bo
> >Fixed some coding style issues.
> >
> >v7: Enhanced invalid vma pinning test to verify 32-bit PPGTT functionality.
> >Enabled the test for 32-bit PPGTT systems, and verify pinning fails above
> >32-bit addresses. Enhanced the high adress pinning test to ensure pinning
> >fails when EXEC_OBJECT_PINNED flag is not used. Some more cosmetic fixes to
> >close buffer handles. Changed userptr function to used synchronized operations.
> >
> >Cc: Michel Thierry <michel.thierry@xxxxxxxxx>
> >Cc: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxx>
> >Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@xxxxxxxxx>
> >---
> > tests/.gitignore | 1 +
> > tests/Makefile.sources | 1 +
> > tests/gem_softpin.c | 1050 ++++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 1052 insertions(+)
> > create mode 100644 tests/gem_softpin.c
> >
> >diff --git a/tests/.gitignore b/tests/.gitignore
> >index 80af9a7..424870b 100644
> >--- a/tests/.gitignore
> >+++ b/tests/.gitignore
> >@@ -21,6 +21,7 @@ gem_bad_blit
> > gem_bad_length
> > gem_bad_reloc
> > gem_basic
> >+gem_softpin
> > gem_caching
> > gem_close_race
> > gem_concurrent_all
> >diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> >index 8fb2de8..2008d4a 100644
> >--- a/tests/Makefile.sources
> >+++ b/tests/Makefile.sources
> >@@ -11,6 +11,7 @@ TESTS_progs_M = \
> > drv_hangman \
> > gem_bad_reloc \
> > gem_basic \
> >+ gem_softpin \
> > gem_caching \
> > gem_close_race \
> > gem_concurrent_blit \
> >diff --git a/tests/gem_softpin.c b/tests/gem_softpin.c
> >new file mode 100644
> >index 0000000..86cfaf8
> >--- /dev/null
> >+++ b/tests/gem_softpin.c
> >@@ -0,0 +1,1050 @@
> >+/*
> >+ * Copyright © 2015 Intel Corporation
> >+ *
> >+ * Permission is hereby granted, free of charge, to any person obtaining a
> >+ * copy of this software and associated documentation files (the "Software"),
> >+ * to deal in the Software without restriction, including without limitation
> >+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> >+ * and/or sell copies of the Software, and to permit persons to whom the
> >+ * Software is furnished to do so, subject to the following conditions:
> >+ *
> >+ * The above copyright notice and this permission notice (including the next
> >+ * paragraph) shall be included in all copies or substantial portions of the
> >+ * Software.
> >+ *
> >+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> >+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> >+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> >+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> >+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> >+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> >+ * IN THE SOFTWARE.
> >+ *
> >+ * Authors:
> >+ * Vinay Belgaumkar <vinay.belgaumkar@xxxxxxxxx>
> >+ * Thomas Daniel <thomas.daniel@xxxxxxxxx>
> >+ *
> >+ */
> >+
> >+#include <unistd.h>
> >+#include <stdlib.h>
> >+#include <stdint.h>
> >+#include <stdio.h>
> >+#include <string.h>
> >+#include <fcntl.h>
> >+#include <inttypes.h>
> >+#include <errno.h>
> >+#include <sys/stat.h>
> >+#include <sys/ioctl.h>
> >+#include <sys/time.h>
> >+#include <malloc.h>
> >+#include "drm.h"
> >+#include "ioctl_wrappers.h"
> >+#include "drmtest.h"
> >+#include "intel_chipset.h"
> >+#include "intel_io.h"
> >+#include "i915_drm.h"
> >+#include <assert.h>
> >+#include <sys/wait.h>
> >+#include <sys/ipc.h>
> >+#include <sys/shm.h>
> >+#include "igt_kms.h"
> >+#include <inttypes.h>
> >+#include <sys/types.h>
> >+#include <sys/stat.h>
> >+
> >+#define BO_SIZE 4096
> >+#define MULTIPAGE_BO_SIZE 2 * BO_SIZE
> >+#define STORE_BATCH_BUFFER_SIZE 4
> >+#define EXEC_OBJECT_PINNED (1<<4)
> >+#define EXEC_OBJECT_SUPPORTS_48B_ADDRESS (1<<3)
> >+#define SHARED_BUFFER_SIZE 4096
> >+
> >+typedef struct drm_i915_gem_userptr i915_gem_userptr;
> >+
> >+static uint32_t init_userptr(int fd, i915_gem_userptr *, void *ptr, uint64_t size);
> >+static void *create_mem_buffer(uint64_t size);
> >+static int gem_call_userptr_ioctl(int fd, i915_gem_userptr *userptr);
> >+static void gem_pin_userptr_test(void);
> >+static void gem_pin_bo_test(void);
> >+static void gem_pin_invalid_vma_test(void);
> >+static void gem_pin_overlap_test(void);
> >+static void gem_pin_high_address_test(void);
> >+
> >+#define NO_PPGTT 0
> >+#define ALIASING_PPGTT 1
> >+#define FULL_32_BIT_PPGTT 2
> >+#define FULL_48_BIT_PPGTT 3
> >+/* uses_full_ppgtt
> >+ * Finds supported PPGTT details.
> >+ * @fd DRM fd
> >+ * @min can be
> >+ * 0 - No PPGTT
> >+ * 1 - Aliasing PPGTT
> >+ * 2 - Full PPGTT (32b)
> >+ * 3 - Full PPGTT (48b)
> >+ * RETURNS true/false if min support is present
> >+*/
> >+static bool uses_full_ppgtt(int fd, int min)
> >+{
> >+ struct drm_i915_getparam gp;
> >+ int val = 0;
> >+
> >+ memset(&gp, 0, sizeof(gp));
> >+ gp.param = 18; /* HAS_ALIASING_PPGTT */
> >+ gp.value = &val;
> >+
> >+ if (drmIoctl(fd, DRM_IOCTL_I915_GETPARAM, &gp))
> >+ return 0;
> >+
> >+ errno = 0;
> >+ return val >= min;
> >+}
> >+
> >+
> >+/* gem_call_userptr_ioctl
> >+ * Helper to call ioctl - TODO: move to lib
> >+ * @fd - drm fd
> >+ * @userptr - pointer to initialised userptr
> >+ * RETURNS status of ioctl call
> >+*/
> >+static int gem_call_userptr_ioctl(int fd, i915_gem_userptr *userptr)
> >+{
> >+ int ret;
> >+
> >+ ret = drmIoctl(fd, DRM_IOCTL_I915_GEM_USERPTR, userptr);
> >+
> >+ if (ret)
> >+ ret = errno;
> >+
> >+ return ret;
> >+}
> >+
> >+/* init_userptr
> >+ * Helper that inits userptr an returns handle
> >+ * @fd - drm fd
> >+ * @userptr - pointer to empty userptr
> >+ * @ptr - buffer to be shared
> >+ * @size - size of buffer
> >+ * @ro - read only flag
> >+ * RETURNS handle to shared buffer
> >+*/
> >+static uint32_t init_userptr(int fd, i915_gem_userptr *userptr, void *ptr,
> >+ uint64_t size)
> >+{
> >+ int ret;
> >+
> >+ memset((void*)userptr, 0, sizeof(i915_gem_userptr));
> >+
> >+ userptr->user_ptr = (uint64_t)ptr; /* Need the cast to overcome compiler warning */
> >+ userptr->user_size = size;
> >+ userptr->flags = 0; /* use synchronized operation */
> >+
> >+ ret = gem_call_userptr_ioctl(fd, userptr);
> >+ igt_assert_eq(ret, 0);
> >+
> >+ return userptr->handle;
> >+}
> >+
> >+/* create_mem_buffer
> >+ * Creates a 4K aligned CPU buffer
> >+ * @size - size of buffer
> >+ * RETURNS pointer to buffer of @size
> >+*/
> >+static void *create_mem_buffer(uint64_t size)
> >+{
> >+ void *addr;
> >+ int ret;
> >+
> >+ ret = posix_memalign(&addr, 4096, size);
> >+ igt_assert(ret == 0);
> >+
> >+ return addr;
> >+}
> >+
> >+/* setup_exec_obj
> >+ * populate exec object
> >+ * @exec - exec object
> >+ * @handle - handle to gem buffer
> >+ * @flags - any flags
> >+ * @offset - requested VMA
> >+*/
> >+static void setup_exec_obj(struct drm_i915_gem_exec_object2 *exec,
> >+ uint32_t handle, uint32_t flags,
> >+ uint64_t offset)
> >+{
> >+ memset(exec, 0, sizeof(struct drm_i915_gem_exec_object2));
> >+ exec->handle = handle;
> >+ exec->flags = flags;
> >+ exec->offset = offset;
> >+}
> >+
> >+/* gem_store_data_svm
> >+ * populate batch buffer with MI_STORE_DWORD_IMM command
> >+ * @fd: drm file descriptor
> >+ * @cmd_buf: batch buffer
> >+ * @vaddr: destination Virtual address
> >+ * @data: data to be store at destination
> >+ * @end: whether to end batch buffer or not
> >+*/
> >+static int gem_store_data_svm(int fd, uint32_t *cmd_buf, uint64_t vaddr,
> >+ uint32_t data, bool end)
> >+{
> >+ int i = 0;
> >+
> >+ cmd_buf[i++] = MI_STORE_DWORD_IMM;
> >+ cmd_buf[i++] = vaddr & 0xFFFFFFFC;
> >+ cmd_buf[i++] = (vaddr >> 32) & 0xFFFF; /* bits 32:47 */
> >+
> >+ cmd_buf[i++] = data;
> >+ if (end) {
> >+ cmd_buf[i++] = MI_BATCH_BUFFER_END;
> >+ cmd_buf[i++] = 0;
> >+ }
> >+
> >+ return(i * sizeof(uint32_t));
> >+}
> >+
> >+/* gem_store_data
> >+ * populate batch buffer with MI_STORE_DWORD_IMM command
> >+ * This one fills up reloc buffer as well
> >+ * @fd: drm file descriptor
> >+ * @cmd_buf: batch buffer
> >+ * @data: data to be store at destination
> >+ * @reloc - relocation entry
> >+ * @end: whether to end batch buffer or not
> >+*/
> >+static int gem_store_data(int fd, uint32_t *cmd_buf,
> >+ uint32_t handle, uint32_t data,
> >+ struct drm_i915_gem_relocation_entry *reloc,
> >+ bool end)
> >+{
> >+ int i = 0;
> >+
> >+ cmd_buf[i++] = MI_STORE_DWORD_IMM;
> >+ cmd_buf[i++] = 0; /* lower 31 bits of 48 bit address - 0 reloc needed */
> >+ cmd_buf[i++] = 0; /* upper 15 bits of 48 bit address - 0 reloc needed */
> >+ reloc->offset = 1 * sizeof(uint32_t);
> >+ reloc->delta = 0;
> >+ reloc->target_handle = handle;
> >+ reloc->read_domains = I915_GEM_DOMAIN_RENDER;
> >+ reloc->write_domain = I915_GEM_DOMAIN_RENDER;
> >+ reloc->presumed_offset = 0;
> >+ cmd_buf[i++] = data;
> >+ if (end) {
> >+ cmd_buf[i++] = MI_BATCH_BUFFER_END;
> >+ cmd_buf[i++] = 0;
> >+ }
> >+
> >+ return (i * sizeof(uint32_t));
> >+}
> >+
> >+/* setup_execbuffer
> >+ * helper for buffer execution
> >+ * @execbuf - pointer to execbuffer
> >+ * @exec_object - pointer to exec object2 struct
> >+ * @ring - ring to be used
> >+ * @buffer_count - how manu buffers to submit
> >+ * @batch_length - length of batch buffer
> >+*/
> >+static void setup_execbuffer(struct drm_i915_gem_execbuffer2 *execbuf,
> >+ struct drm_i915_gem_exec_object2 *exec_object,
> >+ int ring, int buffer_count, int batch_length)
> >+{
> >+ execbuf->buffers_ptr = (uint64_t)exec_object;
> >+ execbuf->buffer_count = buffer_count;
> >+ execbuf->batch_start_offset = 0;
> >+ execbuf->batch_len = batch_length;
> >+ execbuf->cliprects_ptr = 0;
> >+ execbuf->num_cliprects = 0;
> >+ execbuf->DR1 = 0;
> >+ execbuf->DR4 = 0;
> >+ execbuf->flags = ring;
> >+ i915_execbuffer2_set_context_id(*execbuf, 0);
> >+ execbuf->rsvd2 = 0;
> >+}
> >+
> >+/* submit_and_sync
> >+ * Helper function for exec and sync functions
> >+ * @fd - drm fd
> >+ * @execbuf - pointer to execbuffer
> >+ * @batch_buf_handle - batch buffer handle
> >+*/
> >+static void submit_and_sync(int fd, struct drm_i915_gem_execbuffer2 *execbuf,
> >+ uint32_t batch_buf_handle)
> >+{
> >+ gem_execbuf(fd, execbuf);
> >+ gem_sync(fd, batch_buf_handle);
> >+}
> >+
> >+/* gem_userptr_sync
> >+ * helper for syncing to CPU domain - copy/paste from userblit
> >+ * @fd - drm fd
> >+ * @handle - buffer handle to sync
> >+*/
> >+static void gem_userptr_sync(int fd, uint32_t handle)
> >+{
> >+ gem_set_domain(fd, handle, I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU);
> >+}
> >+
> >+
> >+/* gem_pin_userptr_test
> >+ * This test will create a shared buffer, and create a command
> >+ * for GPU to write data in it
> >+ * CPU will read and make sure expected value is obtained
> >+ * Malloc a 4K buffer
> >+ * Share buffer with with GPU by using userptr ioctl
> >+ * Create batch buffer to write DATA to first dword of buffer
> >+ * Use 0x1000 address as destination address in batch buffer
> >+ * Set EXEC_OBJECT_PINNED flag in exec object
> >+ * Set 'offset' in exec object to 0x1000
> >+ * Submit execbuffer
> >+ * Verify value of first DWORD in shared buffer matches DATA
> >+*/
> >+static void gem_pin_userptr_test(void)
> >+{
> >+ i915_gem_userptr userptr;
> >+ int fd;
> >+ uint32_t *shared_buffer;
> >+ struct drm_i915_gem_execbuffer2 execbuf;
> >+ struct drm_i915_gem_exec_object2 exec_object2[2];
> >+ uint32_t batch_buffer[STORE_BATCH_BUFFER_SIZE + 2];
> >+ uint32_t batch_buf_handle, shared_buf_handle;
> >+ int ring, len;
> >+ const uint32_t data = 0x12345678;
> >+ uint64_t pinning_offset = 0x1000;
> >+
> >+ fd = drm_open_driver(DRIVER_INTEL);
> >+ igt_require(uses_full_ppgtt(fd, ALIASING_PPGTT));
> >+ batch_buf_handle = gem_create(fd, BO_SIZE);
> >+
> >+ /* create cpu buffer */
> >+ shared_buffer = create_mem_buffer(BO_SIZE);
> >+
> >+ /* share with GPU */
> >+ shared_buf_handle = init_userptr(fd, &userptr, shared_buffer,
> >+ BO_SIZE);
> >+
> >+ /* create command buffer with write command */
> >+ len = gem_store_data_svm(fd, batch_buffer, pinning_offset, data, true);
> >+ gem_write(fd, batch_buf_handle, 0, batch_buffer, len);
> >+
> >+ /* submit command buffer */
> >+ setup_exec_obj(&exec_object2[0], shared_buf_handle,
> >+ EXEC_OBJECT_PINNED, pinning_offset);
> >+ setup_exec_obj(&exec_object2[1], batch_buf_handle, 0, 0);
> >+
> >+ ring = I915_EXEC_RENDER;
> >+
> >+ setup_execbuffer(&execbuf, exec_object2, ring, 2, len);
> >+ submit_and_sync(fd, &execbuf, batch_buf_handle);
> >+ gem_userptr_sync(fd, shared_buf_handle);
> >+
> >+ /* Check if driver pinned the buffer as requested */
> >+ igt_fail_on_f(exec_object2[0].offset != pinning_offset,
> >+ "\nFailed to pin at requested offset");
> >+ /* check on CPU to see if value changes */
> >+ igt_fail_on_f(shared_buffer[0] != data,
> >+ "\nCPU read does not match GPU write,\
> >+ expected: 0x%x, got: 0x%x\n",
> >+ data, shared_buffer[0]);
> >+
> >+ gem_close(fd, batch_buf_handle);
> >+ gem_close(fd, shared_buf_handle);
> >+ close(fd);
> >+ free(shared_buffer);
> >+}
> >+
> >+/* gem_pin_bo
> >+ * This test will test softpinning of a gem buffer object
> >+ * Malloc a 4K buffer
> >+ * Create batch buffer to write DATA to first dword of buffer
> >+ * Use 0x1000 address as destination address in batch buffer
> >+ * Set EXEC_OBJECT_PINNED flag in exec object
> >+ * Set 'offset' in exec object to 0x1000
> >+ * Submit execbuffer
> >+ * Verify value pinned offset matches the request
> >+*/
> >+static void gem_pin_bo_test(void)
> >+{
> >+ int fd;
> >+ struct drm_i915_gem_execbuffer2 execbuf;
> >+ struct drm_i915_gem_exec_object2 exec_object2[2];
> >+ uint32_t batch_buffer[STORE_BATCH_BUFFER_SIZE + 2];
> >+ uint32_t batch_buf_handle, unshared_buf_handle;
> >+ struct drm_i915_gem_relocation_entry reloc[4];
> >+ int ring, len;
> >+ uint32_t value;
> >+ const uint32_t data = 0x12345678;
> >+ uint64_t pinning_offset = 0x1000;
> >+
> >+ fd = drm_open_driver(DRIVER_INTEL);
> >+ igt_require(uses_full_ppgtt(fd, ALIASING_PPGTT));
> >+ batch_buf_handle = gem_create(fd, BO_SIZE);
> >+
> >+ /* create gem buffer */
> >+ unshared_buf_handle = gem_create(fd, BO_SIZE);
> >+
> >+ /* create command buffer with write command */
> >+ len = gem_store_data(fd, batch_buffer, unshared_buf_handle, data,
> >+ reloc, true);
> >+ gem_write(fd, batch_buf_handle, 0, batch_buffer, len);
> >+
> >+ /* submit command buffer */
> >+ setup_exec_obj(&exec_object2[0], unshared_buf_handle,
> >+ EXEC_OBJECT_PINNED, pinning_offset);
> >+ setup_exec_obj(&exec_object2[1], batch_buf_handle, 0, 0);
> >+ exec_object2[1].relocation_count = 1;
> >+ exec_object2[1].relocs_ptr = (uint64_t)reloc;
> >+
> >+ ring = I915_EXEC_RENDER;
> >+
> >+ setup_execbuffer(&execbuf, exec_object2, ring, 2, len);
> >+ submit_and_sync(fd, &execbuf, batch_buf_handle);
> >+
> >+ /* Check if driver pinned the buffer as requested */
> >+ igt_fail_on_f(exec_object2[0].offset != pinning_offset,
> >+ "\nFailed to pin at requested offset");
> >+ gem_read(fd, unshared_buf_handle, 0, (void*)&value, 4);
> >+ igt_assert(value == data);
> >+
> >+ gem_close(fd, batch_buf_handle);
> >+ gem_close(fd, unshared_buf_handle);
> >+ close(fd);
> >+}
> >+
> >+
> >+/* gem_multiple_process_test
> >+ * Run basic test simultaneously with multiple processes
> >+ * This will test pinning same VA separately in each process
> >+
> >+ * fork();
> >+ * Execute basic test in parent/child processes
> >+*/
> >+#define MAX_NUM_PROCESSES 10
> >+
> >+static void gem_multiple_process_test(void)
> >+{
> >+ igt_fork(child, MAX_NUM_PROCESSES) {
> >+ gem_pin_userptr_test();
> >+ }
> >+ igt_waitchildren();
> >+}
> >+
> >+
> >+/* gem_repin_test
> >+ * This test tries to repin a buffer at a previously pinned vma
> >+ * from a different execbuf.
> >+ * Malloc a 4K buffer
> >+ * Share buffer with with GPU by using userptr ioctl
> >+ * Create batch buffer to write DATA to first dword of buffer
> >+ * Use 0x1000 address as destination address in batch buffer
> >+ * Set EXEC_OBJECT_PINNED flag in exec object
> >+ * Set 'offset' in exec object to 0x1000 VMA
> >+ * Submit execbuffer
> >+ * Verify value of first DWORD in shared buffer matches DATA
> >+
> >+ * Create second shared buffer
> >+ * Follow all steps above
> >+ * Execpt, for offset, use VMA of first buffer above
> >+ * Submit execbuffer
> >+ * Verify value of first DWORD in second shared buffer matches DATA
> >+*/
> >+static void gem_repin_test(void)
> >+{
> >+ i915_gem_userptr userptr;
> >+ i915_gem_userptr userptr1;
> >+ int fd;
> >+ uint32_t *shared_buffer;
> >+ uint32_t *shared_buffer1;
> >+ struct drm_i915_gem_execbuffer2 execbuf;
> >+ struct drm_i915_gem_exec_object2 exec_object2[2];
> >+ uint32_t batch_buffer[STORE_BATCH_BUFFER_SIZE + 2];
> >+ uint32_t batch_buf_handle, shared_buf_handle, shared_buf_handle1;
> >+ int ring, len;
> >+ const uint32_t data = 0x12345678;
> >+ uint64_t pinning_offset = 0x1000;
> >+
> >+ /* Create gem object */
> >+ fd = drm_open_driver(DRIVER_INTEL);
> >+ igt_require(uses_full_ppgtt(fd, ALIASING_PPGTT));
> >+
> >+ batch_buf_handle = gem_create(fd, BO_SIZE);
> >+
> >+ /* create cpu buffer, set first elements to 0x0 */
> >+ shared_buffer = create_mem_buffer(BO_SIZE);
> >+ shared_buffer1 = create_mem_buffer(BO_SIZE);
> >+ shared_buffer[0] = 0x0;
> >+ shared_buffer1[0] = 0x0;
> >+
> >+ /* share with GPU and get handles */
> >+ shared_buf_handle = init_userptr(fd, &userptr, shared_buffer,
> >+ BO_SIZE);
> >+ shared_buf_handle1 = init_userptr(fd, &userptr1, shared_buffer1,
> >+ BO_SIZE);
> >+
> >+ /* create command buffer with write command */
> >+ len = gem_store_data_svm(fd, batch_buffer, pinning_offset, data, true);
> >+ gem_write(fd, batch_buf_handle, 0, batch_buffer, len);
> >+
> >+ /* submit command buffer */
> >+ setup_exec_obj(&exec_object2[0], shared_buf_handle,
> >+ EXEC_OBJECT_PINNED, pinning_offset);
> >+ setup_exec_obj(&exec_object2[1], batch_buf_handle, 0, 0);
> >+
> >+ ring = I915_EXEC_RENDER;
> >+
> >+ setup_execbuffer(&execbuf, exec_object2, ring, 2, len);
> >+ submit_and_sync(fd, &execbuf, batch_buf_handle);
> >+ gem_userptr_sync(fd, shared_buf_handle);
> >+
> >+ igt_assert(exec_object2[0].offset == pinning_offset);
> >+ igt_assert(*shared_buffer == data);
> >+
> >+ /* Second buffer */
> >+ /* create command buffer with write command */
> >+ pinning_offset = exec_object2[0].offset;
> >+ len = gem_store_data_svm(fd, batch_buffer, pinning_offset, data, true);
> >+ gem_write(fd, batch_buf_handle, 0, batch_buffer, len);
> >+
> >+ /* submit command buffer */
> >+ /* Pin at shared_buffer, not shared_buffer1 */
> >+ /* We are requesting address where another buffer was pinned previously */
> >+ setup_exec_obj(&exec_object2[0], shared_buf_handle1,
> >+ EXEC_OBJECT_PINNED, pinning_offset);
> >+ setup_exec_obj(&exec_object2[1], batch_buf_handle, 0, 0);
> >+
> >+ ring = I915_EXEC_RENDER;
> >+
> >+ setup_execbuffer(&execbuf, exec_object2, ring, 2, len);
> >+ submit_and_sync(fd, &execbuf, batch_buf_handle);
> >+ gem_userptr_sync(fd, shared_buf_handle1);
> >+
> >+ igt_assert(exec_object2[0].offset == pinning_offset);
> >+ igt_assert(*shared_buffer1 == data);
> >+
> >+ gem_close(fd, batch_buf_handle);
> >+ gem_close(fd, shared_buf_handle);
> >+ close(fd);
> >+
> >+ free(shared_buffer);
> >+ free(shared_buffer1);
> >+}
> >+
> >+
> >+/* gem_repin_overlap_test
> >+ * This test will attempt to pin two buffers at the same VMA as part of the same
> >+ execbuffer object
> >+
> >+ * Malloc a 4K buffer
> >+ * Share buffer with with GPU by using userptr ioctl
> >+ * Create second shared buffer
> >+ * Create batch buffer to write DATA to first dword of each buffer
> >+ * Use same virtual address as destination addresses in batch buffer
> >+ * Set EXEC_OBJECT_PINNED flag in both exec objects
> >+ * Set 'offset' in both exec objects to same VMA
> >+ * Submit execbuffer
> >+ * Command should return EINVAL, since we are trying to pin to same VMA
> >+*/
> >+static void gem_pin_overlap_test(void)
> >+{
> >+ i915_gem_userptr userptr;
> >+ i915_gem_userptr userptr1;
> >+ int fd, ret;
> >+ uint32_t *shared_buffer;
> >+ uint32_t *shared_buffer1;
> >+ struct drm_i915_gem_execbuffer2 execbuf;
> >+ struct drm_i915_gem_exec_object2 exec_object2[3];
> >+ uint32_t shared_buf_handle, shared_buf_handle1;
> >+ int ring, len;
> >+ uint64_t pinning_offset = 0x1000;
> >+
> >+ fd = drm_open_driver(DRIVER_INTEL);
> >+ igt_require(uses_full_ppgtt(fd, ALIASING_PPGTT));
> >+
> >+ shared_buffer = create_mem_buffer(BO_SIZE);
> >+ shared_buffer1 = create_mem_buffer(BO_SIZE * 2);
> >+
> >+ /* share with GPU */
> >+ shared_buf_handle = init_userptr(fd, &userptr, shared_buffer,
> >+ BO_SIZE);
> >+ shared_buf_handle1 = init_userptr(fd, &userptr1, shared_buffer1,
> >+ BO_SIZE * 2);
> >+
> >+ /* submit command buffer */
> >+ setup_exec_obj(&exec_object2[0], shared_buf_handle,
> >+ EXEC_OBJECT_PINNED, pinning_offset);
> >+ setup_exec_obj(&exec_object2[1], shared_buf_handle1,
> >+ EXEC_OBJECT_PINNED, pinning_offset);
> >+
> >+ ring = I915_EXEC_RENDER;
> >+
> >+ setup_execbuffer(&execbuf, exec_object2, ring, 2, len);
> >+
> >+ ret = drmIoctl(fd, DRM_IOCTL_I915_GEM_EXECBUFFER2, &execbuf);
> >+
> >+ /* expect to fail */
> >+ igt_assert_neq(ret, 0);
> >+ igt_assert(errno == EINVAL);
> >+
> >+ close(fd);
> >+ free(shared_buffer);
> >+ free(shared_buffer1);
> >+}
> >+
> >+/* gem_softpin_stress_test
> >+ * Stress test which creates 10K buffers and shares with GPU
> >+ * Create 100K uint32 buffers of size 4K each
> >+ * Share with GPU using userptr ioctl
> >+ * Create batch buffer to write DATA in first element of each buffer
> >+ * Pin each buffer to varying addresses starting from 0x800000000000 going below
> >+ * Execute Batch Buffer on Blit ring STRESS_NUM_LOOPS times
> >+ * Validate every buffer has DATA in first element
> >+ * Rinse and Repeat on Render ring
> >+*/
> >+#define STRESS_NUM_BUFFERS 100000
> >+#define STRESS_NUM_LOOPS 100
> >+#define STRESS_STORE_COMMANDS 4 * STRESS_NUM_BUFFERS
> >+
> >+static void gem_softpin_stress_test(void)
> >+{
> >+ i915_gem_userptr userptr;
> >+ int fd;
> >+ uint32_t **shared_buffer;
> >+ uint32_t *shared_handle;
> >+ struct drm_i915_gem_execbuffer2 execbuf;
> >+ struct drm_i915_gem_exec_object2 *exec_object2;
> >+ uint32_t *batch_buffer;
> >+ uint32_t batch_buf_handle;
> >+ int ring, len;
> >+ int buf, loop;
> >+ uint64_t pinning_offset = 0x800000000000;
> >+
> >+ fd = drm_open_driver(DRIVER_INTEL);
> >+ igt_require(uses_full_ppgtt(fd, FULL_48_BIT_PPGTT));
> >+
> >+
> >+ /* Allocate blobs for all data structures */
> >+ shared_handle = calloc(STRESS_NUM_BUFFERS, sizeof(uint32_t));
> >+ shared_buffer = calloc(STRESS_NUM_BUFFERS, sizeof(uint32_t *));
> >+ exec_object2 = calloc(STRESS_NUM_BUFFERS + 1,
> >+ sizeof(struct drm_i915_gem_exec_object2));
> >+ /* 4 dwords per buffer + 2 for the end of batchbuffer */
> >+ batch_buffer = calloc(STRESS_STORE_COMMANDS + 2, sizeof(uint32_t));
> >+ batch_buf_handle = gem_create(fd, (STRESS_STORE_COMMANDS + 2)*4);
> >+
> >+ /* create command buffer with write commands */
> >+ len = 0;
> >+ for(buf = 0; buf < STRESS_NUM_BUFFERS; buf++) {
> >+ shared_buffer[buf] = create_mem_buffer(BO_SIZE);
> >+ *shared_buffer[buf] = 0xFFFFFFFF;
> >+
> >+ /* share with GPU */
> >+ shared_handle[buf] = init_userptr(fd, &userptr,
> >+ shared_buffer[buf],
> >+ BO_SIZE);
> >+
> >+ setup_exec_obj(&exec_object2[buf], shared_handle[buf],
> >+ EXEC_OBJECT_PINNED, pinning_offset);
> >+ len += gem_store_data_svm(fd, batch_buffer + (len/4),
> >+ pinning_offset, buf,
> >+ (buf == STRESS_NUM_BUFFERS-1)? \
> >+ true:false);
> >+
> >+ /* decremental 4K aligned address */
> >+ pinning_offset -= ALIGN(BO_SIZE, 4096);
> >+ }
> >+
> >+ /* setup command buffer */
> >+ gem_write(fd, batch_buf_handle, 0, batch_buffer, len);
> >+ setup_exec_obj(&exec_object2[STRESS_NUM_BUFFERS], batch_buf_handle,
> >+ 0, 0);
> >+
> >+ /* We want to run this on BLT ring if possible */
> >+ if (HAS_BLT_RING(intel_get_drm_devid(fd))) {
> >+ ring = I915_EXEC_BLT;
> >+
> >+ setup_execbuffer(&execbuf, exec_object2, ring,
> >+ STRESS_NUM_BUFFERS + 1, len);
> >+
> >+ for (loop = 0; loop < STRESS_NUM_LOOPS; loop++) {
> >+ submit_and_sync(fd, &execbuf, batch_buf_handle);
> >+ /* Set pinning offset back to original value */
> >+ pinning_offset = 0x800000000000;
> >+ for(buf = 0; buf < STRESS_NUM_BUFFERS; buf++) {
> >+ gem_userptr_sync(fd, shared_handle[buf]);
> >+ igt_assert(exec_object2[buf].offset == pinning_offset);
> >+ igt_fail_on_f(*shared_buffer[buf] != buf, \
> >+ "Mismatch in buffer %d, iteration %d: 0x%08X\n", \
> >+ buf, loop, *shared_buffer[buf]);
> >+ pinning_offset -= ALIGN(BO_SIZE, 4096);
> >+ }
> >+ /* Reset the buffer entries for next iteration */
> >+ for(buf = 0; buf < STRESS_NUM_BUFFERS; buf++) {
> >+ *shared_buffer[buf] = 0xFFFFFFFF;
> >+ }
> >+ }
> >+ }
> >+
> >+ /* Now Render Ring */
> >+ ring = I915_EXEC_RENDER;
> >+ setup_execbuffer(&execbuf, exec_object2, ring,
> >+ STRESS_NUM_BUFFERS + 1, len);
> >+ for (loop = 0; loop < STRESS_NUM_LOOPS; loop++) {
> >+ submit_and_sync(fd, &execbuf, batch_buf_handle);
> >+ pinning_offset = 0x800000000000;
> >+ for(buf = 0; buf < STRESS_NUM_BUFFERS; buf++) {
> >+ gem_userptr_sync(fd, shared_handle[buf]);
> >+ igt_assert(exec_object2[buf].offset == pinning_offset);
> >+ igt_fail_on_f(*shared_buffer[buf] != buf, \
> >+ "Mismatch in buffer %d, \
> >+ iteration %d: 0x%08X\n", buf, loop, *shared_buffer[buf]);
> >+ pinning_offset -= ALIGN(BO_SIZE, 4096);
> >+ }
> >+ /* Reset the buffer entries for next iteration */
> >+ for(buf = 0; buf < STRESS_NUM_BUFFERS; buf++) {
> >+ *shared_buffer[buf] = 0xFFFFFFFF;
> >+ }
> >+ }
> >+
> >+ for(buf = 0; buf < STRESS_NUM_BUFFERS; buf++) {
> >+ gem_close(fd, shared_handle[buf]);
> >+ free(shared_buffer[buf]);
> >+ }
> >+ gem_close(fd, batch_buf_handle);
> >+ close(fd);
> >+
> >+ free(shared_handle);
> >+ free(shared_buffer);
> >+ free(exec_object2);
> >+ free(batch_buffer);
> >+}
> >+
> >+/* gem_write_multipage_buffer
> >+ * Create a buffer spanning multiple pages, and share with GPU.
> >+ * Write to every element of the buffer
> >+ * and verify correct contents.
> >+
> >+ * Create 8K buffer
> >+ * Share with GPU using userptr ioctl
> >+ * Create batch buffer to write DATA in all elements of buffer
> >+ * Execute Batch Buffer
> >+ * Validate every element has DATA
> >+*/
> >+
> >+#define DWORD_SIZE sizeof(uint32_t)
> >+#define BB_SIZE ((MULTIPAGE_BO_SIZE / DWORD_SIZE) * STORE_BATCH_BUFFER_SIZE) + 2
> >+#define NUM_DWORDS (MULTIPAGE_BO_SIZE/sizeof(uint32_t))
> >+static void gem_write_multipage_buffer_test(void)
> >+{
> >+ i915_gem_userptr userptr;
> >+ int fd;
> >+ uint32_t *shared_buffer;
> >+ uint32_t shared_handle;
> >+ struct drm_i915_gem_execbuffer2 execbuf;
> >+ struct drm_i915_gem_exec_object2 exec_object2[2];
> >+ uint32_t batch_buffer[BB_SIZE];
> >+ uint32_t batch_buf_handle;
> >+ int ring, len, j;
> >+ uint64_t pinning_offset=0x1000;
> >+ uint64_t vaddr;
> >+
> >+ fd = drm_open_driver(DRIVER_INTEL);
> >+ igt_require(uses_full_ppgtt(fd, ALIASING_PPGTT));
> >+
> >+ batch_buf_handle = gem_create(fd, sizeof(batch_buffer));
> >+ shared_buffer = create_mem_buffer(MULTIPAGE_BO_SIZE);
> >+
> >+ len = 0;
> >+ memset(batch_buffer, 0, sizeof(batch_buffer));
> >+ memset(shared_buffer, 0, MULTIPAGE_BO_SIZE);
> >+
> >+ /* share with GPU */
> >+ shared_handle = init_userptr(fd, &userptr, shared_buffer,
> >+ MULTIPAGE_BO_SIZE);
> >+ setup_exec_obj(&exec_object2[0], shared_handle,
> >+ EXEC_OBJECT_PINNED, pinning_offset);
> >+
> >+ /* create command buffer with write commands */
> >+ vaddr = pinning_offset;
> >+ for(j=0; j< NUM_DWORDS; j++) {
> >+ len += gem_store_data_svm(fd, batch_buffer + (len/4), vaddr,
> >+ j,
> >+ (j == NUM_DWORDS - 1) ? true:false);
> >+ vaddr += sizeof(shared_buffer[0]); /* 4 bytes */
> >+ }
> >+
> >+ gem_write(fd, batch_buf_handle, 0, batch_buffer, len);
> >+
> >+ /* submit command buffer */
> >+ setup_exec_obj(&exec_object2[1], batch_buf_handle, 0, 0);
> >+
> >+ ring = I915_EXEC_RENDER;
> >+ setup_execbuffer(&execbuf, exec_object2, ring, 2, len);
> >+ submit_and_sync(fd, &execbuf, batch_buf_handle);
> >+ gem_userptr_sync(fd, shared_handle);
> >+
> >+ igt_assert(exec_object2[0].offset == pinning_offset);
> >+ for(j = 0; j < (MULTIPAGE_BO_SIZE/sizeof(uint32_t)); j++) {
> >+ igt_fail_on_f(shared_buffer[j] != j,
> >+ "Mismatch in index %d: 0x%08X\n", j, shared_buffer[j]);
> >+ }
> >+
> >+ gem_close(fd, batch_buf_handle);
> >+ gem_close(fd, shared_handle);
> >+ close(fd);
> >+
> >+ free(shared_buffer);
> >+}
> >+
> >+/* gem_pin_invalid_vma_test
> >+ * This test will request to pin a shared buffer to an invalid
> >+ * VMA > 48-bit address if system supports 48B PPGTT
> >+ * If system supports 32B PPGTT, it will test the equivalent invalid VMA
> >+ * Create shared buffer of size 4K
> >+ * Try and Pin object to invalid address
> >+*/
> >+static void gem_pin_invalid_vma_test(void)
> >+{
> >+ i915_gem_userptr userptr;
> >+ int fd, ret;
> >+ uint32_t *shared_buffer;
> >+ struct drm_i915_gem_execbuffer2 execbuf;
> >+ struct drm_i915_gem_exec_object2 exec_object2[1];
> >+ uint32_t shared_buf_handle;
> >+ int ring;
> >+ uint64_t invalid_address_for_48b = 0x9000000000000; /* 52 bit address */
> >+ uint64_t invalid_address_for_32b = 0x900000000; /* 36 bit address */
> >+
> >+ fd = drm_open_driver(DRIVER_INTEL);
> >+ igt_require(uses_full_ppgtt(fd, FULL_48_BIT_PPGTT) ||
> >+ uses_full_ppgtt(fd, FULL_32_BIT_PPGTT));
> >+
> >+ shared_buffer = create_mem_buffer(BO_SIZE);
> >+ *shared_buffer = 0xFFFFFFFF;
> >+
> >+ /* share with GPU */
> >+ shared_buf_handle = init_userptr(fd, &userptr, shared_buffer, BO_SIZE);
> >+
> >+ if (uses_full_ppgtt(fd, FULL_48_BIT_PPGTT)) {
> >+ setup_exec_obj(&exec_object2[0], shared_buf_handle,
> >+ EXEC_OBJECT_PINNED, invalid_address_for_48b);
> >+ } else {
> >+ setup_exec_obj(&exec_object2[0], shared_buf_handle,
> >+ EXEC_OBJECT_PINNED, invalid_address_for_32b);
> >+ }
> >+
> >+ ring = I915_EXEC_RENDER;
> >+
> >+ setup_execbuffer(&execbuf, exec_object2, ring, 1, 0);
> >+
> >+ /* Expect execbuf to fail */
> >+ ret = drmIoctl(fd,
> >+ DRM_IOCTL_I915_GEM_EXECBUFFER2,
> >+ &execbuf);
> >+
> >+ igt_assert(errno == ENOSPC);
> >+ igt_assert_neq(ret, 0);
> >+
> >+ gem_close(fd, shared_buf_handle);
> >+ close(fd);
> >+ free(shared_buffer);
> >+}
> >+
> >+
> >+/* gem_pin_high_address_test
> >+ * This test will create a shared buffer, and create a command
> >+ * for GPU to write data in it. It will attempt to pin the buffer at address > 32 bits.
> >+ * CPU will read and make sure expected value is obtained
> >+
> >+ * Malloc a 4K buffer
> >+ * Share buffer with with GPU by using userptr ioctl
> >+ * Create batch buffer to write DATA to first dword of buffer
> >+ * Use virtual address of buffer as 0x1100000000 (> 32 bit)
> >+ * Set EXEC_OBJECT_PINNED flag in exec object
> >+ * Set 'offset' in exec object to shared buffer VMA
> >+ * Submit execbuffer
> >+ * Verify value of first DWORD in shared buffer matches DATA
> >+ * Now try same test without using EXEC_OBJECT_PINNED flag
> >+ * test should fail pinned offset check
> >+*/
> >+
> >+static void gem_pin_high_address_test(void)
> >+{
> >+ i915_gem_userptr userptr;
> >+ int fd;
> >+ uint32_t *shared_buffer;
> >+ struct drm_i915_gem_execbuffer2 execbuf;
> >+ struct drm_i915_gem_exec_object2 exec_object2[2];
> >+ uint32_t batch_buffer[STORE_BATCH_BUFFER_SIZE + 2];
> >+ uint32_t batch_buf_handle, shared_buf_handle;
> >+ int ring, len;
> >+ const uint32_t data = 0x12345678;
> >+ uint64_t high_address = 0x1111FFFF000; /* 44 bit address */
> >+
> >+ fd = drm_open_driver(DRIVER_INTEL);
> >+ igt_require(uses_full_ppgtt(fd, FULL_48_BIT_PPGTT));
> >+
> >+ batch_buf_handle = gem_create(fd, BO_SIZE);
> >+
> >+ /* create cpu buffer, set to all 0xF's */
> >+ shared_buffer = create_mem_buffer(BO_SIZE);
> >+ *shared_buffer = 0xFFFFFFFF;
> >+
> >+ /* share with GPU */
> >+ shared_buf_handle = init_userptr(fd, &userptr, shared_buffer, BO_SIZE);
> >+
> >+ /* create command buffer with write command */
> >+ len = gem_store_data_svm(fd, batch_buffer, high_address, data, true);
> >+ gem_write(fd, batch_buf_handle, 0, batch_buffer, len);
> >+
> >+ /* submit command buffer */
> >+ setup_exec_obj(&exec_object2[0], shared_buf_handle,
> >+ EXEC_OBJECT_PINNED | EXEC_OBJECT_SUPPORTS_48B_ADDRESS, high_address);
> >+ setup_exec_obj(&exec_object2[1], batch_buf_handle, 0, 0);
> >+
> >+ ring = I915_EXEC_RENDER;
> >+
> >+ setup_execbuffer(&execbuf, exec_object2, ring, 2, len);
> >+ submit_and_sync(fd, &execbuf, batch_buf_handle);
> >+ gem_userptr_sync(fd, shared_buf_handle);
> >+
> >+ igt_assert(exec_object2[0].offset == high_address);
> >+ /* check on CPU to see if value changes */
> >+ igt_fail_on_f(shared_buffer[0] != data,
> >+ "\nCPU read does not match GPU write, \
> >+ expected: 0x%x, got: 0x%x\n", data, shared_buffer[0]);
> >+
> >+ /* Now try pinning to high address without EXEC_OBJECT_PINNED flag */
>
> I thought here EXEC_OBJECT_PINNED without EXEC_OBJECT_SUPPORTS_48B_ADDRESS,
> to verify that the former really implies the latter.
>
> If you change that you can add my r-b.
I think Chris replied on the kernel patch already, but please don't create
such depencies in flags.
-Daniel
>
> Regards,
>
> Tvrtko
>
> >+ setup_exec_obj(&exec_object2[0], shared_buf_handle,
> >+ 0, high_address);
> >+ setup_execbuffer(&execbuf, exec_object2, ring, 2, len);
> >+ submit_and_sync(fd, &execbuf, batch_buf_handle);
> >+ gem_userptr_sync(fd, shared_buf_handle);
> >+
> >+ /* Since we did not request 48B addressing using EXEC_OBJECT_PINNED */
> >+ igt_assert(exec_object2[0].offset != high_address);
> >+
> >+ gem_close(fd, batch_buf_handle);
> >+ gem_close(fd, shared_buf_handle);
> >+ close(fd);
> >+ free(shared_buffer);
> >+}
> >+
> >+/* gem_pin_near_48Bit_test
> >+ * This test will create a shared buffer,
> >+ * and create a command for GPU to write data in it. It will attempt
> >+ * to pin the buffer at address > 47 bits <= 48-bit.
> >+ * CPU will read and make sure expected value is obtained
> >+
> >+ * Malloc a 4K buffer
> >+ * Share buffer with with GPU by using userptr ioctl
> >+ * Create batch buffer to write DATA to first dword of buffer
> >+ * Use virtual address of buffer as range between 47-bit and 48-bit
> >+ * Set EXEC_OBJECT_PINNED flag in exec object
> >+ * Set 'offset' in exec object to shared buffer VMA
> >+ * Submit execbuffer
> >+ * Verify value of first DWORD in shared buffer matches DATA
> >+*/
> >+#define BEGIN_HIGH_ADDRESS 0x7FFFFFFFF000
> >+#define END_HIGH_ADDRESS 0xFFFFFFFFC000
> >+#define ADDRESS_INCREMENT 0x2000000000
> >+static void gem_pin_near_48Bit_test(void)
> >+{
> >+ i915_gem_userptr userptr;
> >+ int fd;
> >+ uint32_t *shared_buffer;
> >+ struct drm_i915_gem_execbuffer2 execbuf;
> >+ struct drm_i915_gem_exec_object2 exec_object2[2];
> >+ uint32_t batch_buffer[BO_SIZE];
> >+ uint32_t batch_buf_handle, shared_buf_handle;
> >+ int ring, len;
> >+ const uint32_t data = 0x12345678;
> >+ uint64_t high_address;
> >+
> >+ fd = drm_open_driver(DRIVER_INTEL);
> >+ igt_require(uses_full_ppgtt(fd, FULL_48_BIT_PPGTT));
> >+
> >+ batch_buf_handle = gem_create(fd, BO_SIZE);
> >+
> >+ /* create cpu buffer, set to all 0xF's */
> >+ shared_buffer = create_mem_buffer(BO_SIZE);
> >+ *shared_buffer = 0xFFFFFFFF;
> >+
> >+ /* share with GPU */
> >+ shared_buf_handle = init_userptr(fd, &userptr, shared_buffer, BO_SIZE);
> >+
> >+ for (high_address = BEGIN_HIGH_ADDRESS; high_address <= END_HIGH_ADDRESS;
> >+ high_address+=ADDRESS_INCREMENT) {
> >+ /* create command buffer with write command */
> >+ len = gem_store_data_svm(fd, batch_buffer, high_address,
> >+ data, true);
> >+ gem_write(fd, batch_buf_handle, 0, batch_buffer, len);
> >+ /* submit command buffer */
> >+ setup_exec_obj(&exec_object2[0], shared_buf_handle,
> >+ EXEC_OBJECT_PINNED | EXEC_OBJECT_SUPPORTS_48B_ADDRESS,
> >+ high_address);
> >+ setup_exec_obj(&exec_object2[1], batch_buf_handle, 0, 0);
> >+
> >+ ring = I915_EXEC_RENDER;
> >+ setup_execbuffer(&execbuf, exec_object2, ring, 2, len);
> >+ submit_and_sync(fd, &execbuf, batch_buf_handle);
> >+ gem_userptr_sync(fd, shared_buf_handle);
> >+
> >+ igt_assert(exec_object2[0].offset == high_address);
> >+ /* check on CPU to see if value changes */
> >+ igt_fail_on_f(shared_buffer[0] != data,
> >+ "\nCPU read does not match GPU write, expected: 0x%x, \
> >+ got: 0x%x\n, 0x%"PRIx64"", data, shared_buffer[0], high_address);
> >+ }
> >+
> >+ gem_close(fd, batch_buf_handle);
> >+ gem_close(fd, shared_buf_handle);
> >+ close(fd);
> >+ free(shared_buffer);
> >+}
> >+
> >+
> >+int main(int argc, char* argv[])
> >+{
> >+ igt_subtest_init(argc, argv);
> >+ igt_skip_on_simulation();
> >+
> >+ /* All tests need PPGTT support */
> >+ igt_subtest("gem_pin_userptr") {
> >+ gem_pin_userptr_test();
> >+ }
> >+ igt_subtest("gem_pin_bo") {
> >+ gem_pin_bo_test();
> >+ }
> >+ igt_subtest("gem_multiple_process") {
> >+ gem_multiple_process_test();
> >+ }
> >+ igt_subtest("gem_repin") {
> >+ gem_repin_test();
> >+ }
> >+ igt_subtest("gem_pin_overlap") {
> >+ gem_pin_overlap_test();
> >+ }
> >+ igt_subtest("gem_write_multipage_buffer") {
> >+ gem_write_multipage_buffer_test();
> >+ }
> >+
> >+ /* Following tests need 32/48 Bit PPGTT support */
> >+ igt_subtest("gem_pin_invalid_vma") {
> >+ gem_pin_invalid_vma_test();
> >+ }
> >+
> >+ /* Following tests need 48 Bit PPGTT support */
> >+ igt_subtest("gem_softpin_stress") {
> >+ gem_softpin_stress_test();
> >+ }
> >+ igt_subtest("gem_pin_high_address") {
> >+ gem_pin_high_address_test();
> >+ }
> >+ igt_subtest("gem_pin_near_48Bit") {
> >+ gem_pin_near_48Bit_test();
> >+ }
> >+
> >+ igt_exit();
> >+}
> >
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
