Re: [PATCH 2/2] drm/i915: Allow PCH DPLL sharing regardles of DPLL_SDVO_HIGH_SPEED

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 03, 2015 at 09:02:12AM +0100, Daniel Vetter wrote:
> On Wed, Nov 25, 2015 at 04:35:31PM +0200, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > 
> > DPLL_SDVO_HIGH_SPEED must be set for SDVO/HDMI/DP, but nowhere is it
> > forbidden to set it for LVDS/CRT as well. So let's move it out of the
> > ironlake_compute_dpll() and just do it on demand in the pll enable hook.
> > This allows the PLL to be shared in more cases when dealing with
> > different output types.
> > 
> > Note that we must now call the pll enable hook regarless of the current
> > pll state, so that DPLL_SDVO_HIGH_SPEED gets updated appropriately.
> > 
> > FIXME: maybe better to add a separate hook for the "pll already enabled"
> > case?
> > 
> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/intel_display.c | 29 +++++++++++++++++++++--------
> >  1 file changed, 21 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 26cafeea2845..ae58f1105458 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -1908,6 +1908,8 @@ static void intel_enable_shared_dpll(struct intel_crtc *crtc)
> >  	if (pll->active++) {
> >  		WARN_ON(!pll->on);
> >  		assert_shared_dpll_enabled(dev_priv, pll);
> > +		/* to update high speed IO clock state */
> > +		pll->enable(dev_priv, pll);
> >  		return;
> >  	}
> >  	WARN_ON(pll->on);
> > @@ -8942,11 +8944,6 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
> >  	dpll |= (crtc_state->pixel_multiplier - 1)
> >  		<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
> >  
> > -	if (is_sdvo)
> > -		dpll |= DPLL_SDVO_HIGH_SPEED;
> > -	if (crtc_state->has_dp_encoder)
> > -		dpll |= DPLL_SDVO_HIGH_SPEED;
> > -
> >  	/* compute bitmask from p1 value */
> >  	dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
> >  	/* also FPA1 */
> > @@ -13626,7 +13623,7 @@ static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
> >  		return false;
> >  
> >  	val = I915_READ(PCH_DPLL(pll->id));
> > -	hw_state->dpll = val;
> > +	hw_state->dpll = val & ~DPLL_SDVO_HIGH_SPEED;
> >  	hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
> >  	hw_state->fp1 = I915_READ(PCH_FP1(pll->id));
> >  
> > @@ -13643,10 +13640,26 @@ static void ibx_pch_dpll_mode_set(struct drm_i915_private *dev_priv,
> >  static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv,
> >  				struct intel_shared_dpll *pll)
> >  {
> > +	struct drm_device *dev = dev_priv->dev;
> > +	struct intel_crtc *crtc;
> > +	u32 dpll = pll->config.hw_state.dpll;
> > +
> > +	/* Configure high speed IO clock as needed */
> > +	for_each_intel_crtc(dev, crtc) {
> > +		if (intel_crtc_to_shared_dpll(crtc) == pll &&
> > +		    crtc->config->base.active &&
> > +		    (crtc->config->has_dp_encoder ||
> > +		     intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
> > +		     intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))) {
> > +			dpll |= DPLL_SDVO_HIGH_SPEED;
> > +			break;
> > +		}
> > +	}
> 
> This is a bit ugly. What about adding a needs_5x_clock to struct
> intel_shared_dpll_config (i.e. outside of the hw pll state to avoid
> unsharing and pipe checker warnings)? ilk_compute_dpll would set that, and
> this function here obeys.
> 
> Clearing would only happen when we completely disable a pll after the last
> user is gone.

I don't really like potentially wasting power like that. I suppose it's
a miniscule amount most likely, but still feels a bit wrong.

> 
> I just find looping over anything in modeset code offensive ;-)
> 
> Also please add your extended bspec research to the commit message.
> -Daniel
> 
> > +
> >  	/* PCH refclock must be enabled first */
> >  	ibx_assert_pch_refclk_enabled(dev_priv);
> >  
> > -	I915_WRITE(PCH_DPLL(pll->id), pll->config.hw_state.dpll);
> > +	I915_WRITE(PCH_DPLL(pll->id), dpll);
> >  
> >  	/* Wait for the clocks to stabilize. */
> >  	POSTING_READ(PCH_DPLL(pll->id));
> > @@ -13657,7 +13670,7 @@ static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv,
> >  	 *
> >  	 * So write it again.
> >  	 */
> > -	I915_WRITE(PCH_DPLL(pll->id), pll->config.hw_state.dpll);
> > +	I915_WRITE(PCH_DPLL(pll->id), dpll);
> >  	POSTING_READ(PCH_DPLL(pll->id));
> >  	udelay(200);
> >  }
> > -- 
> > 2.4.10
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux