Re: [PATCH 02/12] drm/i915: Calculate watermark related members in the crtc_state, v3.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Op 24-11-15 om 15:03 schreef Ander Conselvan De Oliveira:
> On Thu, 2015-11-19 at 16:07 +0100, Maarten Lankhorst wrote:
>> This removes pre/post_wm_update from intel_crtc->atomic, and
>> creates atomic state for it in intel_crtc.
>>
>> Changes since v1:
>> - Rebase on top of wm changes.
>> Changes since v2:
>> - Split disable_cxsr into a separate patch.
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
>> ---
>>  drivers/gpu/drm/i915/intel_atomic.c  |  1 +
>>  drivers/gpu/drm/i915/intel_display.c | 31 +++++++++++++------------------
>>  drivers/gpu/drm/i915/intel_drv.h     |  2 +-
>>  3 files changed, 15 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_atomic.c
>> b/drivers/gpu/drm/i915/intel_atomic.c
>> index 9f0638a37b6d..4625f8a9ba12 100644
>> --- a/drivers/gpu/drm/i915/intel_atomic.c
>> +++ b/drivers/gpu/drm/i915/intel_atomic.c
>> @@ -96,6 +96,7 @@ intel_crtc_duplicate_state(struct drm_crtc *crtc)
>>  	crtc_state->update_pipe = false;
>>  	crtc_state->disable_lp_wm = false;
>>  	crtc_state->disable_cxsr = false;
>> +	crtc_state->wm_changed = false;
>>  
>>  	return &crtc_state->base;
>>  }
>> diff --git a/drivers/gpu/drm/i915/intel_display.c
>> b/drivers/gpu/drm/i915/intel_display.c
>> index 5ee64e67ad8a..db4995406277 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -4741,6 +4741,8 @@ intel_pre_disable_primary(struct drm_crtc *crtc)
>>  static void intel_post_plane_update(struct intel_crtc *crtc)
>>  {
>>  	struct intel_crtc_atomic_commit *atomic = &crtc->atomic;
>> +	struct intel_crtc_state *pipe_config =
>> +		to_intel_crtc_state(crtc->base.state);
>>  	struct drm_device *dev = crtc->base.dev;
>>  	struct drm_i915_private *dev_priv = dev->dev_private;
>>  
>> @@ -4751,7 +4753,7 @@ static void intel_post_plane_update(struct intel_crtc
>> *crtc)
>>  
>>  	crtc->wm.cxsr_allowed = true;
>>  
>> -	if (crtc->atomic.update_wm_post)
>> +	if (pipe_config->wm_changed)
>>  		intel_update_watermarks(&crtc->base);
> This adds an extra call to intel_update_watermarks() for the case where
> previously update_wm_pre would be set. This won't cause extra register writes
> because of the dirty check, but I think it deserves a note in the commit
> message.
I think intel_update_watermarks needs to be fixed to take a crtc_state and whether pre/post commit is used.

It looks to me like doing anything else could bug if watermarks are changed with 1 plane becoming visible and the other invisible..
>>  
>>  	if (atomic->update_fbc)
>> @@ -4784,6 +4786,9 @@ static void intel_pre_plane_update(struct intel_crtc
>> *crtc)
>>  		crtc->wm.cxsr_allowed = false;
>>  		intel_set_memory_cxsr(dev_priv, false);
>>  	}
>> +
>> +	if (!needs_modeset(&pipe_config->base) && pipe_config->wm_changed)
>> +		intel_update_watermarks(&crtc->base);
>>  }
>>  
>>  static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned
>> plane_mask)
>> @@ -11706,25 +11711,18 @@ int intel_plane_atomic_calc_changes(struct
>> drm_crtc_state *crtc_state,
>>  			 plane->base.id, was_visible, visible,
>>  			 turn_off, turn_on, mode_changed);
>>  
>> -	if (turn_on) {
>> -		intel_crtc->atomic.update_wm_pre = true;
>> -		/* must disable cxsr around plane enable/disable */
>> -		if (plane->type != DRM_PLANE_TYPE_CURSOR) {
>> -			pipe_config->disable_cxsr = true;
>> -			/* to potentially re-enable cxsr */
>> -			intel_crtc->atomic.wait_vblank = true;
>> -			intel_crtc->atomic.update_wm_post = true;
>> -		}
>> -	} else if (turn_off) {
>> -		intel_crtc->atomic.update_wm_post = true;
>> +	if (turn_on || turn_off) {
>> +		pipe_config->wm_changed = true;
>> +
>>  		/* must disable cxsr around plane enable/disable */
>>  		if (plane->type != DRM_PLANE_TYPE_CURSOR) {
>>  			if (is_crtc_enabled)
>>  				intel_crtc->atomic.wait_vblank = true;
>>  			pipe_config->disable_cxsr = true;
>>  		}
>> -	} else if (intel_wm_need_update(plane, plane_state)) {
>> -		intel_crtc->atomic.update_wm_pre = true;
>> +	} else if ((was_visible || visible) &&
> So this avoids watermark changes when the plane is not visible before or after
> the update. Wouldn't it be better to fix intel_wm_need_update() instead if
> returns true in that case?

If visible is changed wm_changed = true is always set. It would go through the (turn_on || turn_off) case.

I guess checking was_visible || visible is overkill, and could be changed to
just visible && intel_wm_need_update(plane, plane_state).

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux