From: Dave Gordon <david.s.gordon@xxxxxxxxx>
Added various definitions that will be useful for the scheduler in general and
pre-emptive context switching in particular.
Change-Id: Ica805b94160426def51f5d520f5ce51c60864a98
For: VIZ-1587
Signed-off-by: Dave Gordon <david.s.gordon@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 30 +++++++++++++++++++++++++++++-
drivers/gpu/drm/i915/intel_ringbuffer.h | 32 +++++++++++++++++++++++++++++---
2 files changed, 58 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index db72f98..b986050 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -259,6 +259,10 @@
#define MI_GLOBAL_GTT (1<<22)
#define MI_NOOP MI_INSTR(0, 0)
+#define MI_NOOP_WRITE_ID (1<<22)
+#define MI_NOOP_ID_MASK ((1<<22) - 1)
+#define MI_NOOP_MID(id) ((id) & MI_NOOP_ID_MASK)
+#define MI_NOOP_WITH_ID(id) MI_INSTR(0, MI_NOOP_WRITE_ID|MI_NOOP_MID(id))
#define MI_USER_INTERRUPT MI_INSTR(0x02, 0)
#define MI_WAIT_FOR_EVENT MI_INSTR(0x03, 0)
#define MI_WAIT_FOR_OVERLAY_FLIP (1<<16)
@@ -276,6 +280,7 @@
#define MI_ARB_ON_OFF MI_INSTR(0x08, 0)
#define MI_ARB_ENABLE (1<<0)
#define MI_ARB_DISABLE (0<<0)
+#define MI_ARB_CHECK MI_INSTR(0x05, 0)
#define MI_BATCH_BUFFER_END MI_INSTR(0x0a, 0)
#define MI_SUSPEND_FLUSH MI_INSTR(0x0b, 0)
#define MI_SUSPEND_FLUSH_EN (1<<0)
@@ -325,6 +330,8 @@
#define MI_SEMAPHORE_SYNC_INVALID (3<<16)
#define MI_SEMAPHORE_SYNC_MASK (3<<16)
#define MI_SET_CONTEXT MI_INSTR(0x18, 0)
+#define MI_CONTEXT_ADDR_MASK ((~0)<<12)
+#define MI_SET_CONTEXT_FLAG_MASK ((1<<12)-1)
#define MI_MM_SPACE_GTT (1<<8)
#define MI_MM_SPACE_PHYSICAL (0<<8)
#define MI_SAVE_EXT_STATE_EN (1<<3)
@@ -344,6 +351,10 @@
#define MI_USE_GGTT (1 << 22) /* g4x+ */
#define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1)
#define MI_STORE_DWORD_INDEX_SHIFT 2
+#define MI_STORE_REG_MEM MI_INSTR(0x24, 1)
+#define MI_STORE_REG_MEM_GTT (1 << 22)
+#define MI_STORE_REG_MEM_PREDICATE (1 << 21)
+
/* Official intel docs are somewhat sloppy concerning MI_LOAD_REGISTER_IMM:
* - Always issue a MI_NOOP _before_ the MI_LOAD_REGISTER_IMM - otherwise hw
* simply ignores the register load under certain conditions.
@@ -358,7 +369,10 @@
#define MI_FLUSH_DW MI_INSTR(0x26, 1) /* for GEN6 */
#define MI_FLUSH_DW_STORE_INDEX (1<<21)
#define MI_INVALIDATE_TLB (1<<18)
+#define MI_FLUSH_DW_OP_NONE (0<<14)
#define MI_FLUSH_DW_OP_STOREDW (1<<14)
+#define MI_FLUSH_DW_OP_RSVD (2<<14)
+#define MI_FLUSH_DW_OP_STAMP (3<<14)
#define MI_FLUSH_DW_OP_MASK (3<<14)
#define MI_FLUSH_DW_NOTIFY (1<<8)
#define MI_INVALIDATE_BSD (1<<7)
@@ -1533,6 +1547,19 @@ enum skl_disp_power_wells {
#define HSW_GTT_CACHE_EN 0x4024
#define GTT_CACHE_EN_ALL 0xF0007FFF
+
+/*
+ * Premption-related registers
+ */
+#define RING_UHPTR(base) ((base)+0x134)
+#define UHPTR_GFX_ADDR_ALIGN (0x7)
+#define UHPTR_VALID (0x1)
+#define RING_PREEMPT_ADDR 0x0214c
+#define PREEMPT_BATCH_LEVEL_MASK (0x3)
+#define BB_PREEMPT_ADDR 0x02148
+#define SBB_PREEMPT_ADDR 0x0213c
+#define RS_PREEMPT_STATUS 0x0215c
+
#define GEN7_WR_WATERMARK 0x4028
#define GEN7_GFX_PRIO_CTRL 0x402C
#define ARB_MODE 0x4030
@@ -6736,7 +6763,8 @@ enum skl_disp_power_wells {
#define VLV_SPAREG2H 0xA194
#define GTFIFODBG 0x120000
-#define GT_FIFO_SBDROPERR (1<<6)
+#define GT_FIFO_CPU_ERROR_MASK 0xf
+#define GT_FIFO_SDDROPERR (1<<6)
#define GT_FIFO_BLOBDROPERR (1<<5)
#define GT_FIFO_SB_READ_ABORTERR (1<<4)
#define GT_FIFO_DROPERR (1<<3)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 1987abd..48f60cc 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -49,6 +49,12 @@ struct intel_hw_status_page {
#define I915_READ_MODE(ring) I915_READ(RING_MI_MODE((ring)->mmio_base))
#define I915_WRITE_MODE(ring, val) I915_WRITE(RING_MI_MODE((ring)->mmio_base), val)
+#define I915_READ_UHPTR(ring) \
+ I915_READ(RING_UHPTR((ring)->mmio_base))
+#define I915_WRITE_UHPTR(ring, val) \
+ I915_WRITE(RING_UHPTR((ring)->mmio_base), val)
+#define I915_READ_NOPID(ring) I915_READ(RING_NOPID((ring)->mmio_base))
+
/* seqno size is actually only a uint32, but since we plan to use MI_FLUSH_DW to
* do the writes, and that must have qw aligned offsets, simply pretend it's 8b.
*/
@@ -426,10 +432,30 @@ intel_write_status_page(struct intel_engine_cs *ring,
* 0x20-0x2f: Reserved (Gen6+)
*
* The area from dword 0x30 to 0x3ff is available for driver usage.
+ *
+ * Note: in general the allocation of these indices is arbitrary, as long
+ * as they are all unique. But a few of them are used with instructions that
+ * have specific alignment requirements, those particular indices must be
+ * chosen carefully to meet those requirements. The list below shows the
+ * currently-known alignment requirements:
+ *
+ * I915_GEM_SCRATCH_INDEX must be EVEN
+ */
+
+/*
+ * Tracking; these are updated by the GPU at the beginning and/or end of every
+ * batch. One pair for regular buffers, the other for preemptive ones.
*/
-#define I915_GEM_HWS_INDEX 0x30
-#define I915_GEM_HWS_SCRATCH_INDEX 0x40
-#define I915_GEM_HWS_SCRATCH_ADDR (I915_GEM_HWS_SCRATCH_INDEX << MI_STORE_DWORD_INDEX_SHIFT)
+#define I915_BATCH_DONE_SEQNO 0x30 /* Completed batch seqno */
+#define I915_BATCH_ACTIVE_SEQNO 0x31 /* In progress batch seqno */
+#define I915_PREEMPTIVE_DONE_SEQNO 0x32 /* Completed preemptive batch */
+#define I915_PREEMPTIVE_ACTIVE_SEQNO 0x33 /* In progress preemptive batch */
+
+#define I915_GEM_HWS_INDEX I915_BATCH_DONE_SEQNO /* alias */
+#define I915_GEM_ACTIVE_SEQNO_INDEX I915_BATCH_ACTIVE_SEQNO /* alias */
+
+#define I915_GEM_HWS_SCRATCH_INDEX 0x38 /* QWord */
+#define I915_GEM_HWS_SCRATCH_ADDR (I915_GEM_HWS_SCRATCH_INDEX << MI_STORE_DWORD_INDEX_SHIFT)
struct intel_ringbuffer *
intel_engine_create_ringbuffer(struct intel_engine_cs *engine, int size);
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
