Re: [PATCH 1/6] drm/i915: Splitting intel_dp_detect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Monday 16 November 2015 07:10 PM, Ander Conselvan De Oliveira wrote:
On Fri, 2015-11-06 at 17:58 +0530, Shubhangi Shrivastava wrote:
This patch moves probing for panel, DPCD read etc to another
function intel_dp_long_pulse, while intel_dp_detect returns
the status as connected or disconnected depending on
whether the edid is available or not.
Why is the change in connector status necessary?
Since intel_dp_detect is also called in mode enumeration, so all detect related operations are moved to intel_dp_long_pulse to avoid any such operations to be performed during mode enumeration. intel_dp_long_pulse will perform all the panel probing, DPCD read operations etc. which will end with EDID being read. In intel_dp_detect, it is checked if EDID has been read or not. If EDID has been read then the status is returned as connected to allow further operations otherwise the status is returned as disconnected.


This change will be required by further patches in the series
to avoid performing multiple DPCD operations and removing
their duplication.

Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@xxxxxxxxx>
Signed-off-by: Shubhangi Shrivastava <shubhangi.shrivastava@xxxxxxxxx>
---
  drivers/gpu/drm/i915/intel_dp.c | 66 ++++++++++++++++++++++++++++++----------
-
  1 file changed, 49 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1cb1f3f..a0fe827 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4785,9 +4785,10 @@ intel_dp_power_put(struct intel_dp *dp,
  	intel_display_power_put(to_i915(encoder->base.dev), power_domain);
  }
-static enum drm_connector_status
-intel_dp_detect(struct drm_connector *connector, bool force)
+static void
+intel_dp_long_pulse(struct intel_connector *intel_connector)
  {
+	struct drm_connector *connector = &intel_connector->base;
  	struct intel_dp *intel_dp = intel_attached_dp(connector);
  	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
  	struct intel_encoder *intel_encoder = &intel_dig_port->base;
@@ -4797,17 +4798,6 @@ intel_dp_detect(struct drm_connector *connector, bool
force)
  	bool ret;
  	u8 sink_irq_vector;
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, connector->name);
-	intel_dp_unset_edid(intel_dp);
-
-	if (intel_dp->is_mst) {
-		/* MST devices are disconnected from a monitor POV */
-		if (intel_encoder->type != INTEL_OUTPUT_EDP)
-			intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
-		return connector_status_disconnected;
-	}
-
  	power_domain = intel_dp_power_get(intel_dp);
/* Can't disconnect eDP, but you can close the lid... */
@@ -4817,19 +4807,35 @@ intel_dp_detect(struct drm_connector *connector, bool
force)
  		status = ironlake_dp_detect(intel_dp);
  	else
  		status = g4x_dp_detect(intel_dp);
-	if (status != connector_status_connected)
+	if (status != connector_status_connected) {
+		intel_dp_unset_edid(intel_dp);
  		goto out;
+	}
intel_dp_probe_oui(intel_dp); ret = intel_dp_probe_mst(intel_dp);
  	if (ret) {
-		/* if we are in MST mode then this connector
-		   won't appear connected or have anything with EDID on it */
+		/*
+		 * if we are in MST mode then this connector
+		 * won't appear connected or have anything with
+		 * EDID on it
+		 */
  		if (intel_encoder->type != INTEL_OUTPUT_EDP)
  			intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
  		status = connector_status_disconnected;
  		goto out;
Here the function will exit without a call to intel_dp_unset_edid(), which is
different from the behavior prior to this patch.
Moved call to intel_dp_unset_edid() to out, as per next comment.

+	} else if (connector->status == connector_status_connected) {
+
+		/*
+		 * If display was connected already and is still connected
+		 * check links status, there has been known issues of
+		 * link loss triggerring long pulse!!!!
+		 */
+		drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
+		intel_dp_check_link_status(intel_dp);
+		drm_modeset_unlock(&dev->mode_config.connection_mutex);
+		goto out;
  	}
The hunk above should be in a separate patch. It also doesn't call
intel_dp_unset_edid(). Might be easier to just add

out:
	if (status == connector_status_disconnected)
		intel_dp_unset_edid(intel_dp);

to the end of the function.

Ander
Done. Moved the hunk to next patch and call to intel_dp_unset_edid to out.

  	intel_dp_set_edid(intel_dp);
@@ -4854,7 +4860,33 @@ intel_dp_detect(struct drm_connector *connector, bool
force)
out:
  	intel_dp_power_put(intel_dp, power_domain);
-	return status;
+	return;
+}
+
+static enum drm_connector_status
+intel_dp_detect(struct drm_connector *connector, bool force)
+{
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct intel_encoder *intel_encoder = &intel_dig_port->base;
+	struct intel_connector *intel_connector =
to_intel_connector(connector);
+
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
+		      connector->base.id, connector->name);
+
+	if (intel_dp->is_mst) {
+		/* MST devices are disconnected from a monitor POV */
+		if (intel_encoder->type != INTEL_OUTPUT_EDP)
+			intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
+		return connector_status_disconnected;
+	}
+
+	intel_dp_long_pulse(intel_dp->attached_connector);
+
+	if (intel_connector->detect_edid)
+		return connector_status_connected;
+	else
+		return connector_status_disconnected;
  }
static void

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux