By handling this after the atomic helper waits for vblanks there will
be one less wait for vblank in the atomic path.
Also get rid of the double wait_for_vblank on broadwell, looks like
it's a bug doing the vblank wait twice.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_atomic.c | 1 +
drivers/gpu/drm/i915/intel_display.c | 95 +++++++++++++++++++++++-------------
drivers/gpu/drm/i915/intel_drv.h | 2 +-
3 files changed, 64 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index 3e390db9d22b..2ba0cd698f9b 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -97,6 +97,7 @@ intel_crtc_duplicate_state(struct drm_crtc *crtc)
crtc_state->disable_lp_wm = false;
crtc_state->visible_changed = false;
crtc_state->wm_changed = false;
+ crtc_state->fb_changed = false;
return &crtc_state->base;
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 356e3a9e1741..2708899d9767 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4669,14 +4669,6 @@ intel_post_enable_primary(struct drm_crtc *crtc)
int pipe = intel_crtc->pipe;
/*
- * BDW signals flip done immediately if the plane
- * is disabled, even if the plane enable is already
- * armed to occur at the next vblank :(
- */
- if (IS_BROADWELL(dev))
- intel_wait_for_vblank(dev, pipe);
-
- /*
* FIXME IPS should be fine as long as one plane is
* enabled, but in practice it seems to have problems
* when going from primary only to sprite only and vice
@@ -4758,9 +4750,6 @@ static void intel_post_plane_update(struct intel_crtc *crtc)
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- if (atomic->wait_vblank)
- intel_wait_for_vblank(dev, crtc->pipe);
-
intel_frontbuffer_flip(dev, atomic->fb_bits);
crtc->wm.cxsr_allowed = true;
@@ -11660,6 +11649,9 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
if (!was_visible && !visible)
return 0;
+ if (fb != old_plane_state->base.fb)
+ pipe_config->fb_changed = true;
+
turn_off = was_visible && (!visible || mode_changed);
turn_on = visible && (!was_visible || mode_changed);
@@ -11676,8 +11668,6 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
/* must disable cxsr around plane enable/disable */
if (plane->type != DRM_PLANE_TYPE_CURSOR) {
pipe_config->visible_changed = true;
- if (is_crtc_enabled)
- intel_crtc->atomic.wait_vblank = true;
}
} else if ((was_visible || visible) &&
intel_wm_need_update(plane, plane_state)) {
@@ -11724,14 +11714,6 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
plane_state->rotation != BIT(DRM_ROTATE_0))
intel_crtc->atomic.disable_fbc = true;
- /*
- * BDW signals flip done immediately if the plane
- * is disabled, even if the plane enable is already
- * armed to occur at the next vblank :(
- */
- if (turn_on && IS_BROADWELL(dev))
- intel_crtc->atomic.wait_vblank = true;
-
intel_crtc->atomic.update_fbc |= visible || mode_changed;
break;
case DRM_PLANE_TYPE_CURSOR:
@@ -11746,12 +11728,10 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
if (IS_IVYBRIDGE(dev) &&
needs_scaling(to_intel_plane_state(plane_state)) &&
!needs_scaling(old_plane_state)) {
- to_intel_crtc_state(crtc_state)->disable_lp_wm = true;
- } else if (turn_off && !mode_changed) {
- intel_crtc->atomic.wait_vblank = true;
+ pipe_config->disable_lp_wm = true;
+ } else if (turn_off && !mode_changed)
intel_crtc->atomic.update_sprite_watermarks |=
1 << i;
- }
break;
}
@@ -13261,6 +13241,48 @@ static int intel_atomic_prepare_commit(struct drm_device *dev,
return ret;
}
+static void intel_atomic_wait_for_vblanks(struct drm_device *dev,
+ struct drm_i915_private *dev_priv,
+ unsigned crtc_mask)
+{
+ unsigned last_vblank_count[I915_MAX_PIPES];
+ enum pipe pipe;
+ int ret;
+
+ if (!crtc_mask)
+ return;
+
+ for_each_pipe(dev_priv, pipe) {
+ struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+
+ if (!((1 << pipe) & crtc_mask))
+ continue;
+
+ ret = drm_crtc_vblank_get(crtc);
+ if (ret != 0) {
+ crtc_mask &= ~(1 << pipe);
+ continue;
+ }
+
+ last_vblank_count[pipe] = drm_crtc_vblank_count(crtc);
+ }
+
+ for_each_pipe(dev_priv, pipe) {
+ struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+
+ if (!((1 << pipe) & crtc_mask))
+ continue;
+
+ wait_event_timeout(dev->vblank[pipe].queue,
+ last_vblank_count[pipe] !=
+ drm_crtc_vblank_count(crtc),
+ msecs_to_jiffies(50));
+
+ drm_crtc_vblank_put(crtc);
+ }
+}
+
+
/**
* intel_atomic_commit - commit validated state object
* @dev: DRM device
@@ -13283,11 +13305,11 @@ static int intel_atomic_commit(struct drm_device *dev,
{
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
struct drm_i915_private *dev_priv = dev->dev_private;
+ bool hw_check = intel_state->modeset;
struct drm_crtc_state *crtc_state;
struct drm_crtc *crtc;
- int ret = 0;
- int i;
- bool hw_check = intel_state->modeset;
+ int ret = 0, i;
+ unsigned crtc_vblank_mask = 0;
ret = intel_atomic_prepare_commit(dev, state, async);
if (ret) {
@@ -13335,8 +13357,9 @@ static int intel_atomic_commit(struct drm_device *dev,
for_each_crtc_in_state(state, crtc, crtc_state, i) {
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
bool modeset = needs_modeset(crtc->state);
- bool update_pipe = !modeset &&
- to_intel_crtc_state(crtc->state)->update_pipe;
+ struct intel_crtc_state *pipe_config =
+ to_intel_crtc_state(crtc->state);
+ bool update_pipe = !modeset && pipe_config->update_pipe;
unsigned long put_domains = 0;
if (modeset && crtc->state->active) {
@@ -13358,15 +13381,21 @@ static int intel_atomic_commit(struct drm_device *dev,
(crtc->state->planes_changed || update_pipe))
drm_atomic_helper_commit_planes_on_crtc(crtc_state);
+ if (pipe_config->base.active &&
+ (pipe_config->wm_changed || pipe_config->visible_changed ||
+ pipe_config->fb_changed))
+ crtc_vblank_mask |= 1 << i;
+
if (put_domains)
modeset_put_power_domains(dev_priv, put_domains);
-
- intel_post_plane_update(intel_crtc);
}
/* FIXME: add subpixel order */
- drm_atomic_helper_wait_for_vblanks(dev, state);
+ intel_atomic_wait_for_vblanks(dev, dev_priv, crtc_vblank_mask);
+
+ for_each_crtc_in_state(state, crtc, crtc_state, i)
+ intel_post_plane_update(to_intel_crtc(crtc));
mutex_lock(&dev->struct_mutex);
drm_atomic_helper_cleanup_planes(dev, state);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 59367453d24b..6f99c7398af3 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -375,6 +375,7 @@ struct intel_crtc_state {
bool update_pipe; /* can a fast modeset be performed? */
bool visible_changed; /* plane visibility changed */
bool wm_changed; /* wm changed */
+ bool fb_changed; /* fb on any of the planes is changed */
/* Pipe source size (ie. panel fitter input size)
* All planes will be positioned inside this space,
@@ -541,7 +542,6 @@ struct intel_crtc_atomic_commit {
/* Sleepable operations to perform after commit */
unsigned fb_bits;
- bool wait_vblank;
bool update_fbc;
bool post_enable_primary;
unsigned update_sprite_watermarks;
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
