On ti, 2015-10-27 at 14:47 +0200, Mika Kuoppala wrote:
> From: Damien Lespiau <damien.lespiau@xxxxxxxxx>
>
> The CSR firmware expose two counters, handy to check if we are indeed
> entering DC5/DC6.
>
> v2: Rebase
>
> Signed-off-by: Damien Lespiau <damien.lespiau@xxxxxxxxx>
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx> (v1)
> Signed-off-by: Mika Kuoppala <mika.kuoppala@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_debugfs.c | 7 +++++++
> drivers/gpu/drm/i915/i915_reg.h | 4 ++++
> 2 files changed, 11 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 2f53cb1..d8e9bc8 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -2806,6 +2806,13 @@ static int i915_dmc_info(struct seq_file *m, void *unused)
> seq_printf(m, "version: %d.%d\n", CSR_VERSION_MAJOR(csr->version),
> CSR_VERSION_MINOR(csr->version));
>
> + if (IS_SKYLAKE(dev) && csr->version >= CSR_VERSION(1, 6)) {
> + seq_printf(m, "DC3 -> DC5 count: %d\n",
> + I915_READ(SKL_CSR_DC3_DC5_COUNT));
> + seq_printf(m, "DC5 -> DC6 count: %d\n",
> + I915_READ(SKL_CSR_DC5_DC6_COUNT));
> + }
> +
These registers return all 0xFF without an RPM ref.
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 8942532..bf9bddd 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -5696,6 +5696,10 @@ enum skl_disp_power_wells {
> #define GAMMA_MODE_MODE_12BIT (2 << 0)
> #define GAMMA_MODE_MODE_SPLIT (3 << 0)
>
> +/* DMC/CSR */
> +#define SKL_CSR_DC3_DC5_COUNT 0x80030
> +#define SKL_CSR_DC5_DC6_COUNT 0x8002C
> +
> /* interrupts */
> #define DE_MASTER_IRQ_CONTROL (1 << 31)
> #define DE_SPRITEB_FLIP_DONE (1 << 29)
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
