Do not review this one!
I just found that I forgot to and(&) state->src_x with 0xffff.
V3 coming in a sec or two.
BR
/Robert F
On tis, 2015-10-27 at 16:49 +0100, Robert Fekete wrote:
> Extends i915_display_info so that for each active crtc also print
> all planes associated with the pipe. This patch shows information
> about each plane wrt format, size, position, rotation, and scaling.
> This is very useful when debugging user space compositors that try
> to utilize several planes for a commit.
>
> V2: Fixed comments from Maarten, Ville, and Chris. Fixed printing of
> 16.16 fixpoint, better rotation bitmask management and some minor fixes
>
> Signed-off-by: Robert Fekete <robert.fekete@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_debugfs.c | 109 +++++++++++++++++++++++++++++++++++-
> 1 file changed, 107 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index eca94d0e4d99..9a2265e1139a 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -2950,6 +2950,107 @@ static bool cursor_position(struct drm_device *dev, int pipe, int *x, int *y)
> return cursor_active(dev, pipe);
> }
>
> +static const char *plane_type(enum drm_plane_type type)
> +{
> + switch (type) {
> + case DRM_PLANE_TYPE_OVERLAY:
> + return "OVL";
> + case DRM_PLANE_TYPE_PRIMARY:
> + return "PRI";
> + case DRM_PLANE_TYPE_CURSOR:
> + return "CUR";
> + /*
> + * Deliberately omitting default: to generate compiler warnings
> + * when a new drm_plane_type gets added.
> + */
> + }
> +
> + return "unknown";
> +}
> +
> +static const char *plane_rotation(unsigned int rotation)
> +{
> + static char buf[48];
> + /*
> + * According to doc only one DRM_ROTATE_ is allowed but this
> + * will print them all to visualize if the values are misused
> + */
> + snprintf(buf, sizeof(buf),
> + "%s%s%s%s%s%s(0x%08x)",
> + (rotation & BIT(DRM_ROTATE_0)) ? "0 " : "",
> + (rotation & BIT(DRM_ROTATE_90)) ? "90 " : "",
> + (rotation & BIT(DRM_ROTATE_180)) ? "180 " : "",
> + (rotation & BIT(DRM_ROTATE_270)) ? "270 " : "",
> + (rotation & BIT(DRM_REFLECT_X)) ? "FLIPX " : "",
> + (rotation & BIT(DRM_REFLECT_Y)) ? "FLIPY " : "",
> + rotation);
> +
> + return buf;
> +}
> +
> +static void intel_plane_info(struct seq_file *m, struct intel_crtc *intel_crtc)
> +{
> + struct drm_info_node *node = m->private;
> + struct drm_device *dev = node->minor->dev;
> + struct intel_plane *intel_plane;
> +
> + for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
> + struct drm_plane_state *state;
> + struct drm_plane *plane = &intel_plane->base;
> +
> + if (!plane->state) {
> + seq_puts(m, "plane->state is NULL!\n");
> + continue;
> + }
> +
> + state = plane->state;
> +
> + seq_printf(m, "\t--Plane id %d: type=%s, crtc_pos=%4dx%4d, crtc_size=%4dx%4d, src_pos=%d.%04ux%d.%04u, src_size=%d.%04ux%d.%04u, format=%s, rotation=%s\n",
> + plane->base.id,
> + plane_type(intel_plane->base.type),
> + state->crtc_x, state->crtc_y,
> + state->crtc_w, state->crtc_h,
> + (state->src_x >> 16),
> + ((state->src_x & 0x00ff) * 15625) >> 10,
> + (state->src_y >> 16),
> + ((state->src_y & 0x00ff) * 15625) >> 10,
> + (state->src_w >> 16),
> + ((state->src_w & 0x00ff) * 15625) >> 10,
> + (state->src_h >> 16),
> + ((state->src_h & 0x00ff) * 15625) >> 10,
> + state->fb ? drm_get_format_name(state->fb->pixel_format) : "N/A",
> + plane_rotation(state->rotation));
> + }
> +}
> +
> +static void intel_scaler_info(struct seq_file *m, struct intel_crtc *intel_crtc)
> +{
> + struct intel_crtc_state *pipe_config;
> + int num_scalers = intel_crtc->num_scalers;
> + int i;
> +
> + pipe_config = to_intel_crtc_state(intel_crtc->base.state);
> +
> + /* Not all platformas have a scaler */
> + if (num_scalers) {
> + seq_printf(m, "\tnum_scalers=%d, scaler_users=%x scaler_id=%d",
> + num_scalers,
> + pipe_config->scaler_state.scaler_users,
> + pipe_config->scaler_state.scaler_id);
> +
> + for (i = 0; i < SKL_NUM_SCALERS; i++) {
> + struct intel_scaler *sc =
> + &pipe_config->scaler_state.scalers[i];
> +
> + seq_printf(m, ", scalers[%d]: use=%s, mode=%x",
> + i, yesno(sc->in_use), sc->mode);
> + }
> + seq_puts(m, "\n");
> + } else {
> + seq_puts(m, "\tNo scalers available on this platform\n");
> + }
> +}
> +
> static int i915_display_info(struct seq_file *m, void *unused)
> {
> struct drm_info_node *node = m->private;
> @@ -2969,10 +3070,12 @@ static int i915_display_info(struct seq_file *m, void *unused)
>
> pipe_config = to_intel_crtc_state(crtc->base.state);
>
> - seq_printf(m, "CRTC %d: pipe: %c, active=%s (size=%dx%d)\n",
> + seq_printf(m, "CRTC %d: pipe: %c, active=%s, (size=%dx%d), dither=%s, bpp=%d\n",
> crtc->base.base.id, pipe_name(crtc->pipe),
> yesno(pipe_config->base.active),
> - pipe_config->pipe_src_w, pipe_config->pipe_src_h);
> + pipe_config->pipe_src_w, pipe_config->pipe_src_h,
> + yesno(pipe_config->dither), pipe_config->pipe_bpp);
> +
> if (pipe_config->base.active) {
> intel_crtc_info(m, crtc);
>
> @@ -2982,6 +3085,8 @@ static int i915_display_info(struct seq_file *m, void *unused)
> x, y, crtc->base.cursor->state->crtc_w,
> crtc->base.cursor->state->crtc_h,
> crtc->cursor_addr, yesno(active));
> + intel_scaler_info(m, crtc);
> + intel_plane_info(m, crtc);
> }
>
> seq_printf(m, "\tunderrun reporting: cpu=%s pch=%s \n",
--
BR
/Robert Fekete
Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
