[PATCH 1/2] drm/i915: Call encoder hotplug for init and resume cases

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For all the encoders, call the hot_plug if it is registered.
This is required for connected boot and resume cases to generate
fake hpd resulting in reading of edid.
Removing the initial sdvo hot_plug call too so that it will be called
just once from this loop.

Signed-off-by: Sonika Jindal <sonika.jindal@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_hotplug.c |   11 +++++++++++
 drivers/gpu/drm/i915/intel_sdvo.c    |    1 -
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c
index 53c0173..eac4757 100644
--- a/drivers/gpu/drm/i915/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/intel_hotplug.c
@@ -458,6 +458,7 @@ void intel_hpd_init(struct drm_i915_private *dev_priv)
 {
 	struct drm_device *dev = dev_priv->dev;
 	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
 	struct drm_connector *connector;
 	int i;
 
@@ -482,6 +483,16 @@ void intel_hpd_init(struct drm_i915_private *dev_priv)
 	if (dev_priv->display.hpd_irq_setup)
 		dev_priv->display.hpd_irq_setup(dev);
 	spin_unlock_irq(&dev_priv->irq_lock);
+
+	/*
+	 * Connected boot / resume scenarios can't generate new hot plug.
+	 * So, probe it manually.
+	 */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list,
+			    base.head) {
+		if (encoder->hot_plug)
+			encoder->hot_plug(encoder);
+	}
 }
 
 void intel_hpd_init_work(struct drm_i915_private *dev_priv)
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 05521b5..55859e9 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2433,7 +2433,6 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
 		 * Ensure that they get re-enabled when an interrupt happens.
 		 */
 		intel_encoder->hot_plug = intel_sdvo_enable_hotplug;
-		intel_sdvo_enable_hotplug(intel_encoder);
 	} else {
 		intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
 	}
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux