[PATCH 12/15] drm/i915: Split full retries loop out of clock recovery code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When a failure to achieve clock recovery happens, the link training code
repeats the training process starting with initial values up to five
times before giving up. The logic for the so called "full retries" and
the "voltage tries" was convoluted into a single loop. This patch splits
it into two separate loops, making it easier to follow.

Note that prior to this patch, a failure to get clock recovery with
previously know good values wouldn't count as a voltage or full retry
failure, but now that counts as a full retry failure.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_dp_link_training.c | 75 +++++++++++++--------------
 1 file changed, 35 insertions(+), 40 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
index cd16d65..8b20970 100644
--- a/drivers/gpu/drm/i915/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
@@ -132,14 +132,6 @@ setup_clock_recovery(struct intel_dp *intel_dp)
 
 	intel_dp->DP |= DP_PORT_EN;
 
-	/* clock recovery */
-	if (!intel_dp_reset_link_train(intel_dp,
-				       DP_TRAINING_PATTERN_1 |
-				       DP_LINK_SCRAMBLING_DISABLE)) {
-		DRM_ERROR("failed to enable link training\n");
-		return false;
-	}
-
 	return true;
 }
 
@@ -161,20 +153,13 @@ intel_dp_get_train_voltage(struct intel_dp *intel_dp)
 	return intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
 }
 
-/* Enable corresponding port and start training pattern 1 */
 static bool
-intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
+clock_recovery_voltage_step(struct intel_dp *intel_dp)
 {
-	uint8_t voltage;
-	int voltage_tries, loop_tries;
+	int voltage_tries = 0;
+	uint8_t voltage = 0xff;
 	uint8_t link_status[DP_LINK_STATUS_SIZE];
 
-	if (!setup_clock_recovery(intel_dp))
-		return false;
-
-	voltage = 0xff;
-	voltage_tries = 0;
-	loop_tries = 0;
 	for (;;) {
 		drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd);
 		if (!intel_dp_get_link_status(intel_dp, link_status)) {
@@ -182,10 +167,8 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
 			break;
 		}
 
-		if (drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
-			DRM_DEBUG_KMS("clock recovery OK\n");
+		if (drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count))
 			break;
-		}
 
 		/*
 		 * if we used previously trained voltage and pre-emphasis values
@@ -195,28 +178,12 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
 			DRM_DEBUG_KMS("clock recovery not ok, reset");
 			/* clear the flag as we are not reusing train set */
 			intel_dp->train_set_valid = false;
-			if (!intel_dp_reset_link_train(intel_dp,
-						       DP_TRAINING_PATTERN_1 |
-						       DP_LINK_SCRAMBLING_DISABLE)) {
-				DRM_ERROR("failed to enable link training\n");
-				return false;
-			}
-			continue;
+			break;
 		}
 
 		/* Check to see if we've tried the max voltage */
-		if (max_voltage_reached_on_all_lanes(intel_dp)) {
-			++loop_tries;
-			if (loop_tries == 5) {
-				DRM_ERROR("too many full retries, give up\n");
-				break;
-			}
-			intel_dp_reset_link_train(intel_dp,
-						  DP_TRAINING_PATTERN_1 |
-						  DP_LINK_SCRAMBLING_DISABLE);
-			voltage_tries = 0;
-			continue;
-		}
+		if (max_voltage_reached_on_all_lanes(intel_dp))
+			break;
 
 		/* Check to see if we've tried the same voltage 5 times */
 		if (intel_dp_get_train_voltage(intel_dp) == voltage) {
@@ -240,6 +207,34 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
 	return drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count);
 }
 
+/* Enable corresponding port and start training pattern 1 */
+static bool
+intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
+{
+	int loop_tries;
+
+	if (!setup_clock_recovery(intel_dp))
+		return false;
+
+	for (loop_tries = 0; loop_tries < 5; loop_tries++) {
+		if (!intel_dp_reset_link_train(intel_dp,
+					       DP_TRAINING_PATTERN_1 |
+					       DP_LINK_SCRAMBLING_DISABLE)) {
+			DRM_ERROR("failed to enable link training\n");
+			return false;
+		}
+
+		if (clock_recovery_voltage_step(intel_dp)) {
+			DRM_DEBUG_KMS("clock recovery OK\n");
+			return true;
+		}
+	}
+
+	DRM_ERROR("too many full retries, give up\n");
+
+	return false;
+}
+
 static bool
 setup_channel_equalization(struct intel_dp *intel_dp)
 {
-- 
2.4.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux