Hi Shashank, some feedback below that you would be great to get
addressed before your next version.
On Wed, 2015-09-16 at 23:07 +0530, Shashank Sharma wrote:
> BDW/SKL/BXT platforms support various Gamma correction modes
> which are:
> 1. Legacy 8-bit mode
> 2. 10-bit mode
> 3. 10-bit Split Gamma mode
> 4. 12-bit mode
>
> This patch does the following:
> 1. Adds the core function to program Gamma correction values
> for BDW/SKL/BXT platforms
> 2. Adds Gamma correction macros/defines
>
> Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
> Signed-off-by: Kausal Malladi <kausalmalladi@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 17 +-
> drivers/gpu/drm/i915/intel_color_manager.c | 270
> +++++++++++++++++++++++++++++
*snip*
> +static u32 bdw_write_10bit_gamma_precision(u32 red, u32 green, u32
> blue)
> +{
> + u32 word;
> + u8 blue_int, green_int, red_int;
> + u16 blue_fract, green_fract, red_fract;
> +
> + blue_int = _GAMMA_INT_PART(blue);
> + if (blue_int > GAMMA_INT_MAX)
> + blue = BDW_MAX_GAMMA;
> +
> + green_int = _GAMMA_INT_PART(green);
> + if (green_int > GAMMA_INT_MAX)
> + green = BDW_MAX_GAMMA;
> +
> + red_int = _GAMMA_INT_PART(red);
> + if (red_int > GAMMA_INT_MAX)
> + red = BDW_MAX_GAMMA;
> +
> + blue_fract = _GAMMA_FRACT_PART(blue);
> + green_fract = _GAMMA_FRACT_PART(green);
> + red_fract = _GAMMA_FRACT_PART(red);
> +
> + blue_fract >>= BDW_10BIT_GAMMA_MSB_SHIFT;
> + green_fract >>= BDW_10BIT_GAMMA_MSB_SHIFT;
> + red_fract >>= BDW_10BIT_GAMMA_MSB_SHIFT;
> +
> + /* Red (29:20) Green (19:10) and Blue (9:0) */
> + word = red_fract;
> + word <<= BDW_GAMMA_SHIFT;
> + word = word | green_fract;
> + word <<= BDW_GAMMA_SHIFT;
> + word = word | blue_fract;
> +
> + return word;
> +}
> +
I think the above function, and perhaps others in this series have the
same flaw with respect to maximum colour value.
In our discussions we agreed that we would follow the "GL style" where
maximum colour (i.e. 255 in 8-bit) would be represented by 1.0f. 1.0f
when converted to fixed point 8.24 notation is 1 << 24.
I observed that with my test code that a linear ramp (where the last
entry is set to 1.0) gives me black for white. I tracked it down to
this function.
In order to map 1.0 to the maximum value for the table entry in the
hardware this function needs to be changed. One way to achieve this
would be change the test "blue_int > GAMMA_INT_MAX" to be "blue_int >=
GAMMA_INT_MAX" but since GAMMA_INT_MAX = 1 then it might be clearer to
say blue_int > 0.
BDW_MAX_GAMMA also looks wrong. I think it should be (1 << 24) - 1 not
the 0x10000 (see below). As well as correct clamping it is also
necessary to scale as Daniel suggested on IRC:
"
13:54 < danvet> robster, so we'd need to rescale in the kernel from 1.0
to 0.1111111111b ?
13:55 < danvet> well substract 0.0000000001b for all values > 0.5
probably since float math in the kernel is evil
13:56 < danvet> also this probably needs an igt - check that all black
with an all 1.0 gamma table is the same as
all white with a linear one
"
You won't see this with your test program (color-correction.c) as the
largest value you program in appears to be 0.ff
*snip*
> +/* Gen 9 */
> +#define BDW_MAX_GAMMA 0x10000
>
*snip*
I look forward to testing against your next version.
Rob
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
