On HSW at least (still testing other platforms, but should be harmless
elsewhere), the DSL reg reads back as 0 when read around vblank start
time. This ends up confusing the atomic start/end checking code, since
it causes the update to appear as if it crossed a frame count boundary.
Avoid the problem by making sure we don't return scanline_offset from
the get_crtc_scanline function. In moving the code there, I add to add
an additional delay since it could be called and have a legitimate 0
result for some time (depending on the pixel clock).
v2: move hsw dsl read hack to get_crtc_scanline (Ville)
v3: use break instead of goto (Ville)
update comment with workaround details (Ville)
References: https://bugs.freedesktop.org/show_bug.cgi?id=91579
Signed-off-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_irq.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 1f53061..a8aa797 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -697,6 +697,32 @@ static int __intel_get_crtc_scanline(struct intel_crtc *crtc)
position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
/*
+ * On HSW, the DSL reg (0x70000) appears to return 0 if we
+ * read it just before the start of vblank. So try it again
+ * so we don't accidentally end up spanning a vblank frame
+ * increment, causing the pipe_update_end() code to squak at us.
+ *
+ * The nature of this problem means we can't simply check the ISR
+ * bit and return the vblank start value; nor can we use the scanline
+ * debug register in the transcoder as it appears to have the same
+ * problem. We may need to extend this to include other platforms,
+ * but so far testing only shows the problem on HSW.
+ */
+ if (IS_HASWELL(dev) && !position) {
+ int i, temp;
+
+ for (i = 0; i < 100; i++) {
+ udelay(1);
+ temp = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) &
+ DSL_LINEMASK_GEN3;
+ if (temp != position) {
+ position = temp;
+ break;
+ }
+ }
+ }
+
+ /*
* See update_scanline_offset() for the details on the
* scanline_offset adjustment.
*/
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
