From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Drop the EDP_PSR_BASE() thing, and just stick the PSR register offset
under dev_priv, like we for DSI and GPIO for example.
TODO: could probably move a bunch of this kind of stuff into the device
info instead...
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_debugfs.c | 4 ++--
drivers/gpu/drm/i915/i915_drv.h | 2 ++
drivers/gpu/drm/i915/i915_reg.h | 15 ++++++++-------
drivers/gpu/drm/i915/intel_psr.c | 28 ++++++++++++++++------------
4 files changed, 28 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 2322dac..38b0e38 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2536,7 +2536,7 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
yesno(work_busy(&dev_priv->psr.work.work)));
if (HAS_DDI(dev))
- enabled = I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE;
+ enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
else {
for_each_pipe(dev_priv, pipe) {
stat[pipe] = I915_READ(VLV_PSRSTAT(pipe)) &
@@ -2558,7 +2558,7 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
/* CHV PSR has no kind of performance counter */
if (HAS_DDI(dev)) {
- psrperf = I915_READ(EDP_PSR_PERF_CNT(dev)) &
+ psrperf = I915_READ(EDP_PSR_PERF_CNT) &
EDP_PSR_PERF_CNT_MASK;
seq_printf(m, "Performance_Counter: %u\n", psrperf);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 91ed3c2..4359af1 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1744,6 +1744,8 @@ struct drm_i915_private {
/* MMIO base address for MIPI regs */
uint32_t mipi_mmio_base;
+ uint32_t psr_mmio_base;
+
wait_queue_head_t gmbus_wait_queue;
struct pci_dev *bridge_dev;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 04b2063..3437934 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3037,8 +3037,9 @@ enum skl_disp_power_wells {
#define VLV_PSRSTAT(pipe) _PIPE(pipe, _PSRSTATA, _PSRSTATB)
/* HSW+ eDP PSR registers */
-#define EDP_PSR_BASE(dev) (IS_HASWELL(dev) ? 0x64800 : 0x6f800)
-#define EDP_PSR_CTL(dev) (EDP_PSR_BASE(dev) + 0)
+#define HSW_EDP_PSR_BASE 0x64800
+#define BDW_EDP_PSR_BASE 0x6f800
+#define EDP_PSR_CTL (dev_priv->psr_mmio_base + 0)
#define EDP_PSR_ENABLE (1<<31)
#define BDW_PSR_SINGLE_FRAME (1<<30)
#define EDP_PSR_LINK_STANDBY (1<<27)
@@ -3061,10 +3062,10 @@ enum skl_disp_power_wells {
#define EDP_PSR_TP1_TIME_0us (3<<4)
#define EDP_PSR_IDLE_FRAME_SHIFT 0
-#define EDP_PSR_AUX_CTL(dev) (EDP_PSR_BASE(dev) + 0x10)
-#define EDP_PSR_AUX_DATA(dev, i) (EDP_PSR_BASE(dev) + 0x14 + (i) * 4) /* 5 registers */
+#define EDP_PSR_AUX_CTL (dev_priv->psr_mmio_base + 0x10)
+#define EDP_PSR_AUX_DATA(i) (dev_priv->psr_mmio_base + 0x14 + (i) * 4) /* 5 registers */
-#define EDP_PSR_STATUS_CTL(dev) (EDP_PSR_BASE(dev) + 0x40)
+#define EDP_PSR_STATUS_CTL (dev_priv->psr_mmio_base + 0x40)
#define EDP_PSR_STATUS_STATE_MASK (7<<29)
#define EDP_PSR_STATUS_STATE_IDLE (0<<29)
#define EDP_PSR_STATUS_STATE_SRDONACK (1<<29)
@@ -3088,10 +3089,10 @@ enum skl_disp_power_wells {
#define EDP_PSR_STATUS_SENDING_TP1 (1<<4)
#define EDP_PSR_STATUS_IDLE_MASK 0xf
-#define EDP_PSR_PERF_CNT(dev) (EDP_PSR_BASE(dev) + 0x44)
+#define EDP_PSR_PERF_CNT (dev_priv->psr_mmio_base + 0x44)
#define EDP_PSR_PERF_CNT_MASK 0xffffff
-#define EDP_PSR_DEBUG_CTL(dev) (EDP_PSR_BASE(dev) + 0x60)
+#define EDP_PSR_DEBUG_CTL (dev_priv->psr_mmio_base + 0x60)
#define EDP_PSR_DEBUG_MASK_LPSP (1<<27)
#define EDP_PSR_DEBUG_MASK_MEMUP (1<<26)
#define EDP_PSR_DEBUG_MASK_HPD (1<<25)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index ff66718..90153e7 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -183,9 +183,9 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
DP_AUX_FRAME_SYNC_ENABLE);
aux_data_reg = (INTEL_INFO(dev)->gen >= 9) ?
- DP_AUX_CH_DATA(port, 0) : EDP_PSR_AUX_DATA(dev, 0);
+ DP_AUX_CH_DATA(port, 0) : EDP_PSR_AUX_DATA(0);
aux_ctl_reg = (INTEL_INFO(dev)->gen >= 9) ?
- DP_AUX_CH_CTL(port) : EDP_PSR_AUX_CTL(dev);
+ DP_AUX_CH_CTL(port) : EDP_PSR_AUX_CTL;
/* Setup AUX registers */
for (i = 0; i < sizeof(aux_msg); i += 4)
@@ -277,7 +277,7 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
idle_frames += 4;
}
- I915_WRITE(EDP_PSR_CTL(dev), val |
+ I915_WRITE(EDP_PSR_CTL, val |
(IS_BROADWELL(dev) ? 0 : link_entry_time) |
max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT |
idle_frames << EDP_PSR_IDLE_FRAME_SHIFT |
@@ -341,7 +341,7 @@ static void intel_psr_activate(struct intel_dp *intel_dp)
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE);
+ WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
WARN_ON(dev_priv->psr.active);
lockdep_assert_held(&dev_priv->psr.lock);
@@ -405,7 +405,7 @@ void intel_psr_enable(struct intel_dp *intel_dp)
}
/* Avoid continuous PSR exit by masking memup and hpd */
- I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP |
+ I915_WRITE(EDP_PSR_DEBUG_CTL, EDP_PSR_DEBUG_MASK_MEMUP |
EDP_PSR_DEBUG_MASK_HPD);
/* Enable PSR on the panel */
@@ -467,17 +467,17 @@ static void hsw_psr_disable(struct intel_dp *intel_dp)
struct drm_i915_private *dev_priv = dev->dev_private;
if (dev_priv->psr.active) {
- I915_WRITE(EDP_PSR_CTL(dev),
- I915_READ(EDP_PSR_CTL(dev)) & ~EDP_PSR_ENABLE);
+ I915_WRITE(EDP_PSR_CTL,
+ I915_READ(EDP_PSR_CTL) & ~EDP_PSR_ENABLE);
/* Wait till PSR is idle */
- if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev)) &
+ if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL) &
EDP_PSR_STATUS_STATE_MASK) == 0, 2000, 10))
DRM_ERROR("Timed out waiting for PSR Idle State\n");
dev_priv->psr.active = false;
} else {
- WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE);
+ WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
}
}
@@ -524,7 +524,7 @@ static void intel_psr_work(struct work_struct *work)
* and be ready for re-enable.
*/
if (HAS_DDI(dev_priv->dev)) {
- if (wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev_priv->dev)) &
+ if (wait_for((I915_READ(EDP_PSR_STATUS_CTL) &
EDP_PSR_STATUS_STATE_MASK) == 0, 50)) {
DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
return;
@@ -567,11 +567,11 @@ static void intel_psr_exit(struct drm_device *dev)
return;
if (HAS_DDI(dev)) {
- val = I915_READ(EDP_PSR_CTL(dev));
+ val = I915_READ(EDP_PSR_CTL);
WARN_ON(!(val & EDP_PSR_ENABLE));
- I915_WRITE(EDP_PSR_CTL(dev), val & ~EDP_PSR_ENABLE);
+ I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
} else {
val = I915_READ(VLV_PSRCTL(pipe));
@@ -752,6 +752,10 @@ void intel_psr_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ dev_priv->psr_mmio_base = IS_HASWELL(dev_priv) ?
+ HSW_EDP_PSR_BASE : BDW_EDP_PSR_BASE;
+
INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
mutex_init(&dev_priv->psr.lock);
+
}
--
2.4.6
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
