On Wed, Sep 16, 2015 at 02:48:38PM +0530, Gaurav K Singh wrote:
> Enable BIT 0 of MIPI Port Ctrl reg to enable dual link mode.
>
> Signed-off-by: Deepak M <m.deepak@xxxxxxxxx>
> Signed-off-by: Gaurav K Singh <gaurav.k.singh@xxxxxxxxx>
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 7 ++++---
> drivers/gpu/drm/i915/intel_dsi.c | 9 ++++++---
> 2 files changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 1ea4686..4e5c0bb 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7581,17 +7581,17 @@ enum skl_disp_power_wells {
> /* BXT MIPI mode configure */
> #define _BXT_MIPIA_TRANS_HACTIVE 0x6B0F8
> #define _BXT_MIPIC_TRANS_HACTIVE 0x6B8F8
> -#define BXT_MIPI_TRANS_HACTIVE(tc) _MIPI_PORT(tc, \
> +#define BXT_MIPI_TRANS_HACTIVE(port) _MIPI_PORT(port, \
> _BXT_MIPIA_TRANS_HACTIVE, _BXT_MIPIC_TRANS_HACTIVE)
>
> #define _BXT_MIPIA_TRANS_VACTIVE 0x6B0FC
> #define _BXT_MIPIC_TRANS_VACTIVE 0x6B8FC
> -#define BXT_MIPI_TRANS_VACTIVE(tc) _MIPI_PORT(tc, \
> +#define BXT_MIPI_TRANS_VACTIVE(port) _MIPI_PORT(port, \
> _BXT_MIPIA_TRANS_VACTIVE, _BXT_MIPIC_TRANS_VACTIVE)
>
> #define _BXT_MIPIA_TRANS_VTOTAL 0x6B100
> #define _BXT_MIPIC_TRANS_VTOTAL 0x6B900
> -#define BXT_MIPI_TRANS_VTOTAL(tc) _MIPI_PORT(tc, \
> +#define BXT_MIPI_TRANS_VTOTAL(port) _MIPI_PORT(port, \
> _BXT_MIPIA_TRANS_VTOTAL, _BXT_MIPIC_TRANS_VTOTAL)
>
> #define BXT_DSI_PLL_CTL 0x161000
> @@ -7665,6 +7665,7 @@ enum skl_disp_power_wells {
> #define LANE_CONFIGURATION_4LANE (0 << 0)
> #define LANE_CONFIGURATION_DUAL_LINK_A (1 << 0)
> #define LANE_CONFIGURATION_DUAL_LINK_B (2 << 0)
> +#define LANE_CONFIGURATION_DUAL_LINK_ENABLE (1 << 0)
>
> #define _MIPIA_TEARING_CTRL (VLV_DISPLAY_BASE + 0x61194)
> #define _MIPIC_TEARING_CTRL (VLV_DISPLAY_BASE + 0x61704)
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 2ccbda5..ec7e48b 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -400,9 +400,12 @@ static void intel_dsi_port_enable(struct intel_encoder *encoder)
> if (intel_dsi->ports == ((1 << PORT_A) | (1 << PORT_C))) {
> temp |= (intel_dsi->dual_link - 1)
> << DUAL_LINK_MODE_SHIFT;
> - temp |= intel_crtc->pipe ?
> - LANE_CONFIGURATION_DUAL_LINK_B :
> - LANE_CONFIGURATION_DUAL_LINK_A;
> + if (IS_VALLEYVIEW(dev))
> + temp |= intel_crtc->pipe ?
> + LANE_CONFIGURATION_DUAL_LINK_B :
> + LANE_CONFIGURATION_DUAL_LINK_A;
> + else if (IS_BROXTON(dev))
> + temp |= LANE_CONFIGURATION_DUAL_LINK_ENABLE;
> }
> /* assert ip_tg_enable signal */
> I915_WRITE(port_ctrl, temp | DPI_ENABLE);
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
