In I915_READ64_2x32 we attempt to read a 64bit register using 2 32bit reads. Due to the nature of the registers we try to read in this manner, they may increment between the two instruction (e.g. a timestamp counter). To keep the result accurate, we repeat the read if we detect an overflow (i.e. the upper value varies). However, some harware is just plain flaky and may endless loop as the the upper 32bits are not stable. Just give up after a couple of tries and report whatever we read last. v2: Use the most recent values when erring out on an unstable register. Reported-by: russianneuromancer@xxxxx Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91906 Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx> Cc: Michał Winiarski <michal.winiarski@xxxxxxxxx> Cc: Daniel Vetter <daniel.vetter@xxxxxxxx> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx --- drivers/gpu/drm/i915/i915_drv.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 12870073d58f..51a88e70a6f7 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3402,13 +3402,13 @@ int intel_freq_opcode(struct drm_i915_private *dev_priv, int val); #define I915_READ64(reg) dev_priv->uncore.funcs.mmio_readq(dev_priv, (reg), true) #define I915_READ64_2x32(lower_reg, upper_reg) ({ \ - u32 upper, lower, tmp; \ - tmp = I915_READ(upper_reg); \ + u32 upper, lower, old_upper, loop = 0; \ + upper = I915_READ(upper_reg); \ do { \ - upper = tmp; \ + old_upper = upper; \ lower = I915_READ(lower_reg); \ - tmp = I915_READ(upper_reg); \ - } while (upper != tmp); \ + upper = I915_READ(upper_reg); \ + } while (upper != old_upper && loop++ < 2); \ (u64)upper << 32 | lower; }) #define POSTING_READ(reg) (void)I915_READ_NOTRACE(reg) -- 2.5.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
