From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
This patch contains following changes:
1. MIPI device ready changes to support dsi_pre_enable. Changes
are specific to BXT device ready sequence. Added check for
ULPS mode(No effects on VLV).
2. Changes in dsi_enable to pick BXT port control register.
3. Changes in dsi_pre_enable to restrict DPIO programming for VLV
v2: Fixed Jani's review comments. Removed the changes in VLV/CHV
code. Fixed the macros to get proper port offsets.
v3: Rebased on latest drm-nightly branch. Fixed Jani's review comments.
Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 7 ++
drivers/gpu/drm/i915/intel_dsi.c | 165 ++++++++++++++++++++++++++------------
2 files changed, 119 insertions(+), 53 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 997a999..57c5dbf 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7403,6 +7403,13 @@ enum skl_disp_power_wells {
#define _MIPIA_PORT_CTRL (VLV_DISPLAY_BASE + 0x61190)
#define _MIPIC_PORT_CTRL (VLV_DISPLAY_BASE + 0x61700)
#define MIPI_PORT_CTRL(port) _MIPI_PORT(port, _MIPIA_PORT_CTRL, _MIPIC_PORT_CTRL)
+
+ /* BXT port control */
+#define _BXT_MIPIA_PORT_CTRL 0x6B0C0
+#define _BXT_MIPIC_PORT_CTRL 0x6B8C0
+#define BXT_MIPI_PORT_CTRL(tc) _MIPI_PORT(tc, _BXT_MIPIA_PORT_CTRL, \
+ _BXT_MIPIC_PORT_CTRL)
+
#define DPI_ENABLE (1 << 31) /* A + C */
#define MIPIA_MIPI4DPHY_DELAY_COUNT_SHIFT 27
#define MIPIA_MIPI4DPHY_DELAY_COUNT_MASK (0xf << 27)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 6d0c992..5a42f87 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -286,58 +286,46 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
return true;
}
-static void intel_dsi_port_enable(struct intel_encoder *encoder)
+static void bxt_dsi_device_ready(struct intel_encoder *encoder)
{
- struct drm_device *dev = encoder->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
- u32 temp;
+ u32 val;
- if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
- temp = I915_READ(VLV_CHICKEN_3);
- temp &= ~PIXEL_OVERLAP_CNT_MASK |
- intel_dsi->pixel_overlap <<
- PIXEL_OVERLAP_CNT_SHIFT;
- I915_WRITE(VLV_CHICKEN_3, temp);
- }
+ DRM_DEBUG_KMS("\n");
+ /* Exit Low power state in 4 steps*/
for_each_dsi_port(port, intel_dsi->ports) {
- temp = I915_READ(MIPI_PORT_CTRL(port));
- temp &= ~LANE_CONFIGURATION_MASK;
- temp &= ~DUAL_LINK_MODE_MASK;
- if (intel_dsi->ports == ((1 << PORT_A) | (1 << PORT_C))) {
- temp |= (intel_dsi->dual_link - 1)
- << DUAL_LINK_MODE_SHIFT;
- temp |= intel_crtc->pipe ?
- LANE_CONFIGURATION_DUAL_LINK_B :
- LANE_CONFIGURATION_DUAL_LINK_A;
- }
- /* assert ip_tg_enable signal */
- I915_WRITE(MIPI_PORT_CTRL(port), temp | DPI_ENABLE);
- POSTING_READ(MIPI_PORT_CTRL(port));
- }
-}
+ /* 1. Enable MIPI PHY transparent latch */
+ val = I915_READ(BXT_MIPI_PORT_CTRL(port));
+ I915_WRITE(BXT_MIPI_PORT_CTRL(port), val | LP_OUTPUT_HOLD);
+ usleep_range(2000, 2500);
-static void intel_dsi_port_disable(struct intel_encoder *encoder)
-{
- struct drm_device *dev = encoder->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
- enum port port;
- u32 temp;
+ /* 2. Enter ULPS */
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ val |= (ULPS_STATE_ENTER | DEVICE_READY);
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+ usleep_range(2, 3);
+
+ /* 3. Exit ULPS */
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ val |= (ULPS_STATE_EXIT | DEVICE_READY);
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+ usleep_range(1000, 1500);
- for_each_dsi_port(port, intel_dsi->ports) {
- /* de-assert ip_tg_enable signal */
- temp = I915_READ(MIPI_PORT_CTRL(port));
- I915_WRITE(MIPI_PORT_CTRL(port), temp & ~DPI_ENABLE);
- POSTING_READ(MIPI_PORT_CTRL(port));
+ /* Clear ULPS and set device ready */
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ val |= DEVICE_READY;
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
}
}
-static void intel_dsi_device_ready(struct intel_encoder *encoder)
+static void vlv_dsi_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
@@ -376,6 +364,72 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder)
}
}
+static void intel_dsi_device_ready(struct intel_encoder *encoder)
+{
+ struct drm_device *dev = encoder->base.dev;
+
+ if (IS_VALLEYVIEW(dev))
+ vlv_dsi_device_ready(encoder);
+ else if (IS_BROXTON(dev))
+ bxt_dsi_device_ready(encoder);
+}
+
+static void intel_dsi_port_enable(struct intel_encoder *encoder)
+{
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 temp;
+ u32 port_ctrl;
+
+ if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
+ temp = I915_READ(VLV_CHICKEN_3);
+ temp &= ~PIXEL_OVERLAP_CNT_MASK |
+ intel_dsi->pixel_overlap <<
+ PIXEL_OVERLAP_CNT_SHIFT;
+ I915_WRITE(VLV_CHICKEN_3, temp);
+ }
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ port_ctrl = IS_BROXTON(dev) ? BXT_MIPI_PORT_CTRL(port) :
+ MIPI_PORT_CTRL(port);
+
+ temp = I915_READ(port_ctrl);
+
+ temp &= ~LANE_CONFIGURATION_MASK;
+ temp &= ~DUAL_LINK_MODE_MASK;
+
+ if (intel_dsi->ports == ((1 << PORT_A) | (1 << PORT_C))) {
+ temp |= (intel_dsi->dual_link - 1)
+ << DUAL_LINK_MODE_SHIFT;
+ temp |= intel_crtc->pipe ?
+ LANE_CONFIGURATION_DUAL_LINK_B :
+ LANE_CONFIGURATION_DUAL_LINK_A;
+ }
+ /* assert ip_tg_enable signal */
+ I915_WRITE(port_ctrl, temp | DPI_ENABLE);
+ POSTING_READ(port_ctrl);
+ }
+}
+
+static void intel_dsi_port_disable(struct intel_encoder *encoder)
+{
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 temp;
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ /* de-assert ip_tg_enable signal */
+ temp = I915_READ(MIPI_PORT_CTRL(port));
+ I915_WRITE(MIPI_PORT_CTRL(port), temp & ~DPI_ENABLE);
+ POSTING_READ(MIPI_PORT_CTRL(port));
+ }
+}
+
static void intel_dsi_enable(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
@@ -415,19 +469,24 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder)
DRM_DEBUG_KMS("\n");
- /* Disable DPOunit clock gating, can stall pipe
- * and we need DPLL REFA always enabled */
- tmp = I915_READ(DPLL(pipe));
- tmp |= DPLL_REFA_CLK_ENABLE_VLV;
- I915_WRITE(DPLL(pipe), tmp);
-
- /* update the hw state for DPLL */
- intel_crtc->config->dpll_hw_state.dpll = DPLL_INTEGRATED_CLOCK_VLV |
- DPLL_REFA_CLK_ENABLE_VLV;
-
- tmp = I915_READ(DSPCLK_GATE_D);
- tmp |= DPOUNIT_CLOCK_GATE_DISABLE;
- I915_WRITE(DSPCLK_GATE_D, tmp);
+ if (IS_VALLEYVIEW(dev)) {
+ /*
+ * Disable DPOunit clock gating, can stall pipe
+ * and we need DPLL REFA always enabled
+ */
+ tmp = I915_READ(DPLL(pipe));
+ tmp |= DPLL_REFA_CLK_ENABLE_VLV;
+ I915_WRITE(DPLL(pipe), tmp);
+
+ /* update the hw state for DPLL */
+ intel_crtc->config->dpll_hw_state.dpll =
+ DPLL_INTEGRATED_CLOCK_VLV |
+ DPLL_REFA_CLK_ENABLE_VLV;
+
+ tmp = I915_READ(DSPCLK_GATE_D);
+ tmp |= DPOUNIT_CLOCK_GATE_DISABLE;
+ I915_WRITE(DSPCLK_GATE_D, tmp);
+ }
/* put device in ready state */
intel_dsi_device_ready(encoder);
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
