From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> If the CPU and PCH are on the same package we must enabled the port A HPD also in the south hotplug register. To identify the package type we simply look at the PCH type: LPT-H means separate package, and LPT-LP means multi chip package (MCP). v2: Add comment and pimp commit message Reviewed-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/i915_irq.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index a34521c..886518d 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -3125,6 +3125,12 @@ static void ibx_hpd_irq_setup(struct drm_device *dev) hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms; hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms; hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms; + /* + * When CPU and PCH are on the same package, port A + * HPD must be enabled in both north and south. + */ + if (HAS_PCH_LPT_LP(dev)) + hotplug |= PORTA_HOTPLUG_ENABLE; I915_WRITE(PCH_PORT_HOTPLUG, hotplug); } -- 2.4.6 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
