On Thu, 2015-08-20 at 18:11 -0700, Matt Roper wrote: > Just pull the info out of the state structures rather than staging > it in an additional set of structures. > > Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx> > --- > drivers/gpu/drm/i915/intel_pm.c | 304 ++++++++++++++++++---------------------- > 1 file changed, 135 insertions(+), 169 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c > index b9bcb85..0cfba0a 100644 > --- a/drivers/gpu/drm/i915/intel_pm.c > +++ b/drivers/gpu/drm/i915/intel_pm.c > @@ -1779,13 +1779,6 @@ static uint32_t ilk_wm_fbc(uint32_t pri_val, uint32_t horiz_pixels, > return DIV_ROUND_UP(pri_val * 64, horiz_pixels * bytes_per_pixel) + 2; > } > > -struct skl_pipe_wm_parameters { > - bool active; > - uint32_t pipe_htotal; > - uint32_t pixel_rate; /* in KHz */ > - struct intel_plane_wm_parameters plane[I915_MAX_PLANES + 1]; > -}; > - > struct ilk_wm_maximums { > uint16_t pri; > uint16_t spr; > @@ -2826,18 +2819,40 @@ static bool ilk_disable_lp_wm(struct drm_device *dev) > #define SKL_DDB_SIZE 896 /* in blocks */ > #define BXT_DDB_SIZE 512 > > +/* > + * Return the index of a plane in the SKL DDB and wm result arrays. Primary > + * plane is always in slot 0, cursor is always in slot I915_MAX_PLANES, and > + * other universal planes are in indices 1..n. Note that this may leave > + * unused indices between the top "sprite" plane and the cursor. > + */ > +static int > +skl_wm_plane_id(const struct intel_plane *plane) > +{ > + switch (plane->base.type) { > + case DRM_PLANE_TYPE_PRIMARY: > + return 0; > + case DRM_PLANE_TYPE_CURSOR: > + return I915_MAX_PLANES; > + case DRM_PLANE_TYPE_OVERLAY: > + return plane->plane; > + default: > + MISSING_CASE(plane->base.type); > + return plane->plane; > + } > +} > + > static void > skl_ddb_get_pipe_allocation_limits(struct drm_device *dev, > struct drm_crtc *for_crtc, > const struct intel_wm_config *config, > - const struct skl_pipe_wm_parameters *params, > + const struct intel_crtc_state *cstate, > struct skl_ddb_entry *alloc /* out */) > { > struct drm_crtc *crtc; > unsigned int pipe_size, ddb_size; > int nth_active_pipe; > > - if (!params->active) { > + if (!cstate->base.active) { > alloc->start = 0; > alloc->end = 0; > return; > @@ -2903,19 +2918,27 @@ void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv, > } > > static unsigned int > -skl_plane_relative_data_rate(const struct intel_plane_wm_parameters *p, int y) > +skl_plane_relative_data_rate(const struct drm_plane_state *state, int y) > { > + struct intel_crtc *intel_crtc = to_intel_crtc(state->crtc); > + struct drm_framebuffer *fb = state->fb; > > /* for planar format */ > - if (p->y_bytes_per_pixel) { > + if (fb->pixel_format == DRM_FORMAT_NV12) { > if (y) /* y-plane data rate */ > - return p->horiz_pixels * p->vert_pixels * p->y_bytes_per_pixel; > + return intel_crtc->config->pipe_src_w * > + intel_crtc->config->pipe_src_h * > + drm_format_plane_cpp(fb->pixel_format, 0); > else /* uv-plane data rate */ > - return (p->horiz_pixels/2) * (p->vert_pixels/2) * p->bytes_per_pixel; > + return (intel_crtc->config->pipe_src_w/2) * > + (intel_crtc->config->pipe_src_h/2) * > + drm_format_plane_cpp(fb->pixel_format, 1); > } > > /* for packed formats */ > - return p->horiz_pixels * p->vert_pixels * p->bytes_per_pixel; > + return intel_crtc->config->pipe_src_w * > + intel_crtc->config->pipe_src_h * > + fb->bits_per_pixel / 8; > } > > /* > @@ -2924,23 +2947,24 @@ skl_plane_relative_data_rate(const struct intel_plane_wm_parameters *p, > int y) > * 3 * 4096 * 8192 * 4 < 2^32 > */ > static unsigned int > -skl_get_total_relative_data_rate(struct intel_crtc *intel_crtc, > - const struct skl_pipe_wm_parameters *params) > +skl_get_total_relative_data_rate(const struct intel_crtc *intel_crtc) > { > + struct drm_device *dev = intel_crtc->base.dev; > + const struct intel_plane *intel_plane; > unsigned int total_data_rate = 0; > - int plane; > > - for (plane = 0; plane < intel_num_planes(intel_crtc); plane++) { > - const struct intel_plane_wm_parameters *p; > + for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) { > + const struct drm_plane_state *state = intel_plane->base.state; > > - p = ¶ms->plane[plane]; > - if (!p->enabled) > + if (WARN_ON(state->fb == NULL)) > continue; > > - total_data_rate += skl_plane_relative_data_rate(p, 0); /* packed/uv */ > - if (p->y_bytes_per_pixel) { > - total_data_rate += skl_plane_relative_data_rate(p, 1); /* y-plane */ > - } > + /* packed/uv */ > + total_data_rate += skl_plane_relative_data_rate(state, 0); > + > + if (state->fb->pixel_format == DRM_FORMAT_NV12) > + /* y-plane */ > + total_data_rate += skl_plane_relative_data_rate(state, 1); > } > > return total_data_rate; > @@ -2949,21 +2973,20 @@ skl_get_total_relative_data_rate(struct intel_crtc *intel_crtc, > static void > skl_allocate_pipe_ddb(struct drm_crtc *crtc, > const struct intel_wm_config *config, > - const struct skl_pipe_wm_parameters *params, > + const struct intel_crtc_state *cstate, > struct skl_ddb_allocation *ddb /* out */) > { > struct drm_device *dev = crtc->dev; > - struct drm_i915_private *dev_priv = dev->dev_private; > struct intel_crtc *intel_crtc = to_intel_crtc(crtc); > + struct intel_plane *intel_plane; > enum pipe pipe = intel_crtc->pipe; > struct skl_ddb_entry *alloc = &ddb->pipe[pipe]; > uint16_t alloc_size, start, cursor_blocks; > uint16_t minimum[I915_MAX_PLANES]; > uint16_t y_minimum[I915_MAX_PLANES]; > unsigned int total_data_rate; > - int plane; > > - skl_ddb_get_pipe_allocation_limits(dev, crtc, config, params, alloc); > + skl_ddb_get_pipe_allocation_limits(dev, crtc, config, cstate, alloc); > alloc_size = skl_ddb_entry_size(alloc); > if (alloc_size == 0) { > memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe])); > @@ -2980,17 +3003,20 @@ skl_allocate_pipe_ddb(struct drm_crtc *crtc, > alloc->end -= cursor_blocks; > > /* 1. Allocate the mininum required blocks for each active plane */ > - for_each_plane(dev_priv, pipe, plane) { > - const struct intel_plane_wm_parameters *p; > + for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) { > + struct drm_plane *plane = &intel_plane->base; > + struct drm_framebuffer *fb = plane->fb; > + int id = skl_wm_plane_id(intel_plane); > > - p = ¶ms->plane[plane]; > - if (!p->enabled) > + if (fb == NULL) > + continue; > + if (plane->type == DRM_PLANE_TYPE_CURSOR) > continue; > > - minimum[plane] = 8; > - alloc_size -= minimum[plane]; > - y_minimum[plane] = p->y_bytes_per_pixel ? 8 : 0; > - alloc_size -= y_minimum[plane]; > + minimum[id] = 8; > + alloc_size -= minimum[id]; > + y_minimum[id] = (fb->pixel_format == DRM_FORMAT_NV12) ? 8 : 0; > + alloc_size -= y_minimum[id]; > } > > /* > @@ -2999,45 +3025,45 @@ skl_allocate_pipe_ddb(struct drm_crtc *crtc, > * > * FIXME: we may not allocate every single block here. > */ > - total_data_rate = skl_get_total_relative_data_rate(intel_crtc, params); > + total_data_rate = skl_get_total_relative_data_rate(intel_crtc); > > start = alloc->start; > - for (plane = 0; plane < intel_num_planes(intel_crtc); plane++) { > - const struct intel_plane_wm_parameters *p; > + for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) { > + struct drm_plane_state *state = intel_plane->base.state; > unsigned int data_rate, y_data_rate; > uint16_t plane_blocks, y_plane_blocks = 0; > + int id = skl_wm_plane_id(intel_plane); > > - p = ¶ms->plane[plane]; > - if (!p->enabled) > + if (state->fb == NULL) > continue; Doesn't this need if (plane->type == DRM_PLANE_TYPE_CURSOR) continue; like above? > > - data_rate = skl_plane_relative_data_rate(p, 0); > + data_rate = skl_plane_relative_data_rate(state, 0); > > /* > * allocation for (packed formats) or (uv-plane part of planar format): > * promote the expression to 64 bits to avoid overflowing, the > * result is < available as data_rate / total_data_rate < 1 > */ > - plane_blocks = minimum[plane]; > + plane_blocks = minimum[id]; > plane_blocks += div_u64((uint64_t)alloc_size * data_rate, > total_data_rate); > > - ddb->plane[pipe][plane].start = start; > - ddb->plane[pipe][plane].end = start + plane_blocks; > + ddb->plane[pipe][id].start = start; > + ddb->plane[pipe][id].end = start + plane_blocks; > > start += plane_blocks; > > /* > * allocation for y_plane part of planar format: > */ > - if (p->y_bytes_per_pixel) { > - y_data_rate = skl_plane_relative_data_rate(p, 1); > - y_plane_blocks = y_minimum[plane]; > + if (state->fb->pixel_format == DRM_FORMAT_NV12) { > + y_data_rate = skl_plane_relative_data_rate(state, 1); > + y_plane_blocks = y_minimum[id]; > y_plane_blocks += div_u64((uint64_t)alloc_size * y_data_rate, > total_data_rate); > > - ddb->y_plane[pipe][plane].start = start; > - ddb->y_plane[pipe][plane].end = start + y_plane_blocks; > + ddb->y_plane[pipe][id].start = start; > + ddb->y_plane[pipe][id].end = start + y_plane_blocks; > > start += y_plane_blocks; > } > @@ -3138,72 +3164,16 @@ static void skl_compute_wm_global_parameters(struct drm_device *dev, > } > } > > -static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc, > - struct skl_pipe_wm_parameters *p) > -{ > - struct drm_device *dev = crtc->dev; > - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); > - enum pipe pipe = intel_crtc->pipe; > - struct drm_plane *plane; > - struct drm_framebuffer *fb; > - int i = 1; /* Index for sprite planes start */ > - > - p->active = intel_crtc->active; > - if (p->active) { > - p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal; > - p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config); > - > - fb = crtc->primary->state->fb; > - /* For planar: Bpp is for uv plane, y_Bpp is for y plane */ > - if (fb) { > - p->plane[0].enabled = true; > - p->plane[0].bytes_per_pixel = fb->pixel_format == DRM_FORMAT_NV12 ? > - drm_format_plane_cpp(fb->pixel_format, 1) : fb->bits_per_pixel / > 8; > - p->plane[0].y_bytes_per_pixel = fb->pixel_format == DRM_FORMAT_NV12 ? > - drm_format_plane_cpp(fb->pixel_format, 0) : 0; > - p->plane[0].tiling = fb->modifier[0]; > - } else { > - p->plane[0].enabled = false; > - p->plane[0].bytes_per_pixel = 0; > - p->plane[0].y_bytes_per_pixel = 0; > - p->plane[0].tiling = DRM_FORMAT_MOD_NONE; > - } > - p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w; > - p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h; > - p->plane[0].rotation = crtc->primary->state->rotation; > - > - fb = crtc->cursor->state->fb; > - p->plane[I915_MAX_PLANES].y_bytes_per_pixel = 0; > - if (fb) { > - p->plane[I915_MAX_PLANES].enabled = true; > - p->plane[I915_MAX_PLANES].bytes_per_pixel = fb->bits_per_pixel / 8; > - p->plane[I915_MAX_PLANES].horiz_pixels = crtc->cursor->state->crtc_w; > - p->plane[I915_MAX_PLANES].vert_pixels = crtc->cursor->state->crtc_h; > - } else { > - p->plane[I915_MAX_PLANES].enabled = false; > - p->plane[I915_MAX_PLANES].bytes_per_pixel = 0; > - p->plane[I915_MAX_PLANES].horiz_pixels = 64; > - p->plane[I915_MAX_PLANES].vert_pixels = 64; > - } > - } > - > - list_for_each_entry(plane, &dev->mode_config.plane_list, head) { > - struct intel_plane *intel_plane = to_intel_plane(plane); > - > - if (intel_plane->pipe == pipe && > - plane->type == DRM_PLANE_TYPE_OVERLAY) > - p->plane[i++] = intel_plane->wm; > - } > -} > - > static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv, > - struct skl_pipe_wm_parameters *p, > - struct intel_plane_wm_parameters *p_params, > + struct intel_crtc *intel_crtc, > + struct intel_plane *intel_plane, > uint16_t ddb_allocation, > int level, > uint16_t *out_blocks, /* out */ > uint8_t *out_lines /* out */) > { > + struct drm_plane *plane = &intel_plane->base; > + struct drm_framebuffer *fb = plane->state->fb; > uint32_t latency = dev_priv->wm.skl_latency[level]; > uint32_t method1, method2; > uint32_t plane_bytes_per_line, plane_blocks_per_line; > @@ -3211,31 +3181,35 @@ static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv, > uint32_t selected_result; > uint8_t bytes_per_pixel; > > - if (latency == 0 || !p->active || !p_params->enabled) > + if (latency == 0 || !intel_crtc->active || !fb) In other places you replaced p->actice with cstate->active. Is there a reason why this one doesn't look at the state? > return false; > > - bytes_per_pixel = p_params->y_bytes_per_pixel ? > - p_params->y_bytes_per_pixel : > - p_params->bytes_per_pixel; > - method1 = skl_wm_method1(p->pixel_rate, > + bytes_per_pixel = (fb->pixel_format == DRM_FORMAT_NV12) ? > + drm_format_plane_cpp(DRM_FORMAT_NV12, 0) : > + fb->bits_per_pixel / 8; > + method1 = skl_wm_method1(skl_pipe_pixel_rate(intel_crtc->config), > bytes_per_pixel, > latency); > - method2 = skl_wm_method2(p->pixel_rate, > - p->pipe_htotal, > - p_params->horiz_pixels, > + method2 = skl_wm_method2(skl_pipe_pixel_rate(intel_crtc->config), > + intel_crtc->config->base.adjusted_mode.crtc_htotal, > + intel_crtc->config->pipe_src_w, The other functions were changed to receive the crtc state as an argument. Maybe it would be good to do that here too for consistency. Ander > bytes_per_pixel, > - p_params->tiling, > + fb->modifier[0], > latency); > > - plane_bytes_per_line = p_params->horiz_pixels * bytes_per_pixel; > + plane_bytes_per_line = intel_crtc->config->pipe_src_w * bytes_per_pixel; > plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512); > > - if (p_params->tiling == I915_FORMAT_MOD_Y_TILED || > - p_params->tiling == I915_FORMAT_MOD_Yf_TILED) { > + if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED || > + fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED) { > uint32_t min_scanlines = 4; > uint32_t y_tile_minimum; > - if (intel_rotation_90_or_270(p_params->rotation)) { > - switch (p_params->bytes_per_pixel) { > + if (intel_rotation_90_or_270(plane->state->rotation)) { > + int bpp = (fb->pixel_format == DRM_FORMAT_NV12) ? > + drm_format_plane_cpp(fb->pixel_format, 1) : > + fb->bits_per_pixel / 8; > + > + switch (bpp) { > case 1: > min_scanlines = 16; > break; > @@ -3259,8 +3233,8 @@ static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv, > res_lines = DIV_ROUND_UP(selected_result, plane_blocks_per_line); > > if (level >= 1 && level <= 7) { > - if (p_params->tiling == I915_FORMAT_MOD_Y_TILED || > - p_params->tiling == I915_FORMAT_MOD_Yf_TILED) > + if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED || > + fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED) > res_lines += 4; > else > res_blocks++; > @@ -3277,65 +3251,64 @@ static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv, > > static void skl_compute_wm_level(const struct drm_i915_private *dev_priv, > struct skl_ddb_allocation *ddb, > - struct skl_pipe_wm_parameters *p, > - enum pipe pipe, > + struct intel_crtc *intel_crtc, > int level, > - int num_planes, > struct skl_wm_level *result) > { > + struct drm_device *dev = intel_crtc->base.dev; > + struct intel_plane *intel_plane; > uint16_t ddb_blocks; > - int i; > + enum pipe pipe = intel_crtc->pipe; > + > + for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) { > + int i = skl_wm_plane_id(intel_plane); > > - for (i = 0; i < num_planes; i++) { > ddb_blocks = skl_ddb_entry_size(&ddb->plane[pipe][i]); > > result->plane_en[i] = skl_compute_plane_wm(dev_priv, > - p, &p->plane[i], > + intel_crtc, > + intel_plane, > ddb_blocks, > level, > &result->plane_res_b[i], > &result->plane_res_l[i]); > } > - > - ddb_blocks = skl_ddb_entry_size(&ddb->plane[pipe][I915_MAX_PLANES]); > - result->plane_en[I915_MAX_PLANES] = skl_compute_plane_wm(dev_priv, p, > - &p->plane[I915_MAX_PLANES], > - ddb_blocks, level, > - &result->plane_res_b[I915_MAX_PLANES], > - &result->plane_res_l[I915_MAX_PLANES]); > } > > static uint32_t > -skl_compute_linetime_wm(struct drm_crtc *crtc, struct skl_pipe_wm_parameters *p) > +skl_compute_linetime_wm(struct intel_crtc_state *cstate) > { > - if (!to_intel_crtc(crtc)->active) > + if (!cstate->base.active) > return 0; > > - if (WARN_ON(p->pixel_rate == 0)) > + if (WARN_ON(skl_pipe_pixel_rate(cstate) == 0)) > return 0; > > - return DIV_ROUND_UP(8 * p->pipe_htotal * 1000, p->pixel_rate); > + return DIV_ROUND_UP(8 * cstate->base.adjusted_mode.crtc_htotal * 1000, > + skl_pipe_pixel_rate(cstate)); > } > > -static void skl_compute_transition_wm(struct drm_crtc *crtc, > - struct skl_pipe_wm_parameters *params, > +static void skl_compute_transition_wm(struct intel_crtc_state *cstate, > struct skl_wm_level *trans_wm /* out */) > { > + struct drm_crtc *crtc = cstate->base.crtc; > struct intel_crtc *intel_crtc = to_intel_crtc(crtc); > - int i; > + struct intel_plane *intel_plane; > > - if (!params->active) > + if (!cstate->base.active) > return; > > /* Until we know more, just disable transition WMs */ > - for (i = 0; i < intel_num_planes(intel_crtc); i++) > + for_each_intel_plane_on_crtc(crtc->dev, intel_crtc, intel_plane) { > + int i = skl_wm_plane_id(intel_plane); > + > trans_wm->plane_en[i] = false; > - trans_wm->plane_en[I915_MAX_PLANES] = false; > + } > } > > static void skl_compute_pipe_wm(struct drm_crtc *crtc, > struct skl_ddb_allocation *ddb, > - struct skl_pipe_wm_parameters *params, > + struct intel_crtc_state *cstate, > struct skl_pipe_wm *pipe_wm) > { > struct drm_device *dev = crtc->dev; > @@ -3344,17 +3317,15 @@ static void skl_compute_pipe_wm(struct drm_crtc *crtc, > int level, max_level = ilk_wm_max_level(dev); > > for (level = 0; level <= max_level; level++) { > - skl_compute_wm_level(dev_priv, ddb, params, intel_crtc->pipe, > - level, intel_num_planes(intel_crtc), > - &pipe_wm->wm[level]); > + skl_compute_wm_level(dev_priv, ddb, intel_crtc, > + level, &pipe_wm->wm[level]); > } > - pipe_wm->linetime = skl_compute_linetime_wm(crtc, params); > + pipe_wm->linetime = skl_compute_linetime_wm(cstate); > > - skl_compute_transition_wm(crtc, params, &pipe_wm->trans_wm); > + skl_compute_transition_wm(cstate, &pipe_wm->trans_wm); > } > > static void skl_compute_wm_results(struct drm_device *dev, > - struct skl_pipe_wm_parameters *p, > struct skl_pipe_wm *p_wm, > struct skl_wm_values *r, > struct intel_crtc *intel_crtc) > @@ -3598,16 +3569,15 @@ static void skl_flush_wm_values(struct drm_i915_private *dev_priv, > } > > static bool skl_update_pipe_wm(struct drm_crtc *crtc, > - struct skl_pipe_wm_parameters *params, > struct intel_wm_config *config, > struct skl_ddb_allocation *ddb, /* out */ > struct skl_pipe_wm *pipe_wm /* out */) > { > struct intel_crtc *intel_crtc = to_intel_crtc(crtc); > + struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state); > > - skl_compute_wm_pipe_parameters(crtc, params); > - skl_allocate_pipe_ddb(crtc, config, params, ddb); > - skl_compute_pipe_wm(crtc, ddb, params, pipe_wm); > + skl_allocate_pipe_ddb(crtc, config, cstate, ddb); > + skl_compute_pipe_wm(crtc, ddb, cstate, pipe_wm); > > if (!memcmp(&intel_crtc->wm.skl_active, pipe_wm, sizeof(*pipe_wm))) > return false; > @@ -3640,7 +3610,6 @@ static void skl_update_other_pipe_wm(struct drm_device *dev, > */ > list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, > base.head) { > - struct skl_pipe_wm_parameters params = {}; > struct skl_pipe_wm pipe_wm = {}; > bool wm_changed; > > @@ -3650,8 +3619,7 @@ static void skl_update_other_pipe_wm(struct drm_device *dev, > if (!intel_crtc->active) > continue; > > - wm_changed = skl_update_pipe_wm(&intel_crtc->base, > - ¶ms, config, > + wm_changed = skl_update_pipe_wm(&intel_crtc->base, config, > &r->ddb, &pipe_wm); > > /* > @@ -3661,7 +3629,7 @@ static void skl_update_other_pipe_wm(struct drm_device *dev, > */ > WARN_ON(!wm_changed); > > - skl_compute_wm_results(dev, ¶ms, &pipe_wm, r, intel_crtc); > + skl_compute_wm_results(dev, &pipe_wm, r, intel_crtc); > r->dirty[intel_crtc->pipe] = true; > } > } > @@ -3671,7 +3639,6 @@ static void skl_update_wm(struct drm_crtc *crtc) > struct intel_crtc *intel_crtc = to_intel_crtc(crtc); > struct drm_device *dev = crtc->dev; > struct drm_i915_private *dev_priv = dev->dev_private; > - struct skl_pipe_wm_parameters params = {}; > struct skl_wm_values *results = &dev_priv->wm.skl_results; > struct skl_pipe_wm pipe_wm = {}; > struct intel_wm_config config = {}; > @@ -3680,11 +3647,10 @@ static void skl_update_wm(struct drm_crtc *crtc) > > skl_compute_wm_global_parameters(dev, &config); > > - if (!skl_update_pipe_wm(crtc, ¶ms, &config, > - &results->ddb, &pipe_wm)) > + if (!skl_update_pipe_wm(crtc, &config, &results->ddb, &pipe_wm)) > return; > > - skl_compute_wm_results(dev, ¶ms, &pipe_wm, results, intel_crtc); > + skl_compute_wm_results(dev, &pipe_wm, results, intel_crtc); > results->dirty[intel_crtc->pipe] = true; > > skl_update_other_pipe_wm(dev, crtc, &config, results); _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx