There is no need to have a separate flag for tps3 as the information is
only used at one location. Move the logic there to make it easier to
follow.
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 31 +++++++++++++++++--------------
drivers/gpu/drm/i915/intel_drv.h | 1 -
2 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 50ba527763e9..12bce36065a1 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3848,13 +3848,25 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
void
intel_dp_complete_link_train(struct intel_dp *intel_dp)
{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
bool channel_eq = false;
int tries, cr_tries;
uint32_t DP = intel_dp->DP;
uint32_t training_pattern = DP_TRAINING_PATTERN_2;
- /* Training Pattern 3 for HBR2 or 1.2 devices that support it*/
- if (intel_dp->link_rate == 540000 || intel_dp->use_tps3)
+ /*
+ * Training Pattern 3 for HBR2 or 1.2 devices that support it.
+ *
+ * Intel platforms that support HBR2 also support TPS3. TPS3 support is
+ * also mandatory for downstream devices that support HBR2.
+ *
+ * Due to WaDisableHBR2 SKL < B0 is the only exception where TPS3 is
+ * supported but still not enabled.
+ */
+ if (intel_dp->link_rate == 540000 ||
+ (intel_dp_source_supports_hbr2(dev) &&
+ intel_dp_tps3_supported(intel_dp->dpcd)))
training_pattern = DP_TRAINING_PATTERN_3;
/* channel equalization */
@@ -4036,18 +4048,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
}
}
- /* Training Pattern 3 support, Intel platforms that support HBR2 alone
- * have support for TP3 hence that check is used along with dpcd check
- * to ensure TP3 can be enabled.
- * SKL < B0: due it's WaDisableHBR2 is the only exception where TP3 is
- * supported but still not enabled.
- */
- if (intel_dp_tps3_supported(intel_dp->dpcd) &&
- intel_dp_source_supports_hbr2(dev)) {
- intel_dp->use_tps3 = true;
- DRM_DEBUG_KMS("Displayport TPS3 supported\n");
- } else
- intel_dp->use_tps3 = false;
+ DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
+ intel_dp_source_supports_hbr2(dev) ? "yes" : "no",
+ intel_dp_tps3_supported(intel_dp->dpcd) ? "yes" : "no");
/* Intermediate frequency support */
if (is_edp(intel_dp) &&
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index c61ba47eda7c..fa9840fbccba 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -744,7 +744,6 @@ struct intel_dp {
enum pipe pps_pipe;
struct edp_power_seq pps_delays;
- bool use_tps3;
bool can_mst; /* this port supports mst */
bool is_mst;
int active_mst_links;
--
2.1.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
