On 8/26/2015 6:40 PM, Daniel Vetter wrote:
On Wed, Aug 26, 2015 at 01:36:05AM +0530, Animesh Manna wrote:
Dmc will restore the csr program except DC9, cold boot,
warm reset, PCI function level reset, and hibernate/suspend.
intel_csr_load_program() function is used to load the firmware
data from kernel memory to csr address space.
All values of csr address space will be zero if it got reset and
the first byte of csr program is always a non-zero if firmware
is loaded successfuly. Based on hardware status will load the
firmware.
Without this condition check if we overwrite the firmware data the
counters exposed for dc5/dc6 (help for debugging) will be nullified.
Bacause of the above reason mentioned just above we need to block firmware loading again.
So only WARN_ON will not help.
v1: Initial version.
v2: Based on review comments from Daniel,
- Added a check to know hardware status and load the firmware if not loaded.
Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
Cc: Damien Lespiau <damien.lespiau@xxxxxxxxx>
Cc: Imre Deak <imre.deak@xxxxxxxxx>
Cc: Sunil Kamath <sunil.kamath@xxxxxxxxx>
Signed-off-by: Animesh Manna <animesh.manna@xxxxxxxxx>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_csr.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_csr.c b/drivers/gpu/drm/i915/intel_csr.c
index ba1ae03..682cc26 100644
--- a/drivers/gpu/drm/i915/intel_csr.c
+++ b/drivers/gpu/drm/i915/intel_csr.c
@@ -252,6 +252,15 @@ void intel_csr_load_program(struct drm_device *dev)
return;
}
+ /*
+ * Dmc will restore the csr the program except DC9, cold boot,
+ * warm reset, PCI function level reset, and hibernate/suspend.
+ * This condition will help to check if csr address space is reset/
+ * not loaded.
+ */
Atm we call this from driver load and resume, which doesn seem to cover
all the cases you mention in the comment. Should this be a WARN_ON
instead? Or do we have troubles in our init sequence where we load too
many times?
Yes, the above statement taken from bspec to describe about the special cases dmc will not restore the firmware.
Agree, In our cases cold boot and hibernate/suspend mainly we need to load the firmware again, so in my
second sentence I wanted to comment mainly regarding this condition check added for suspend-hibernate(reset)
and cold boot(not loaded).
Anyways the same api later can be used to load the firmware from anywhere, so my intention to check firmware loaded or not.
If already loaded then not to overwrite the csr address space to maintain the dc5/dc6 counter value.
Can the below comment more clear to you.
/*
* Dmc will restore the csr the program except DC9, cold boot,
* warm reset, PCI function level reset, and hibernate/suspend.
* If firmware is restored by dmc then no need to load again which
* will keep the dc5/dc6 counter exposed by firmware.
*/
No issue in init sequence.
-Animesh
Either way I can't reconcile your commit message with the comment here.
-Daniel
+ if (I915_READ(CSR_PROGRAM_BASE))
+ return;
+
mutex_lock(&dev_priv->csr_lock);
fw_size = dev_priv->csr.dmc_fw_size;
for (i = 0; i < fw_size; i++)
--
2.0.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
