[PATCH 11/15] drm/i915: Add NV12 to primary plane programming.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch is adding NV12 support to skylake primary plane
programming. It is covering linear/X/Y/Yf tiling formats
for 0 and 180 rotations.

For 90/270 rotation, Y and UV subplanes should be treated
as separate surfaces and GTT remapping for rotation should
be done separately for each subplane. Once GEM adds support
for seperate remappings for two subplanes, 90/270 support
to be added to plane programming.

v2:
-Use regular int instead of 16.16 in aux_offset calculations (me)

v3:
-Allow 90/270 for NV12 as its remapping is now supported (me)

v4:
-Rebased to current kernel version 4.2.0.rc4 (me)

Signed-off-by: Chandra Konduru <chandra.konduru@xxxxxxxxx>
Testcase: igt/kms_nv12
---
 drivers/gpu/drm/i915/intel_display.c |   37 ++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 4df4d77..329651e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3026,6 +3026,8 @@ u32 skl_plane_ctl_format(uint32_t pixel_format)
 		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
 	case DRM_FORMAT_VYUY:
 		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
+	case DRM_FORMAT_NV12:
+		return PLANE_CTL_FORMAT_NV12;
 	default:
 		MISSING_CASE(pixel_format);
 	}
@@ -3094,6 +3096,8 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
 	int src_x = 0, src_y = 0, src_w = 0, src_h = 0;
 	int dst_x = 0, dst_y = 0, dst_w = 0, dst_h = 0;
 	int scaler_id = -1;
+	u32 aux_dist = 0, aux_x_offset = 0, aux_y_offset = 0, aux_stride = 0;
+	u32 tile_row_adjustment = 0;
 
 	plane_state = to_intel_plane_state(plane->state);
 
@@ -3150,11 +3154,34 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
 		x_offset = stride * tile_height - y - src_h;
 		y_offset = x;
 		plane_size = (src_w - 1) << 16 | (src_h - 1);
+		/*
+		 * TBD: For NV12 90/270 rotation, Y and UV subplanes should
+		 * be treated as separate surfaces and GTT remapping for
+		 * rotation should be done separately for each subplane.
+		 * Enable support once seperate remappings are available.
+		 */
 	} else {
 		stride = fb->pitches[0] / stride_div;
 		x_offset = x;
 		y_offset = y;
 		plane_size = (src_h - 1) << 16 | (src_w - 1);
+		tile_height = PAGE_SIZE / stride_div;
+
+		if (fb->pixel_format == DRM_FORMAT_NV12) {
+			int height_in_mem = (fb->offsets[1]/fb->pitches[0]);
+			/*
+			 * If UV starts from middle of a page, then UV start should
+			 * be programmed to beginning of that page. And offset into that
+			 * page to be programmed into y-offset
+			 */
+			tile_row_adjustment = height_in_mem % tile_height;
+			aux_dist = fb->pitches[0] * (height_in_mem - tile_row_adjustment);
+			aux_x_offset = DIV_ROUND_UP(x, 2);
+			aux_y_offset = DIV_ROUND_UP(y, 2) + tile_row_adjustment;
+			/* For tile-Yf, uv-subplane tile width is 2x of Y-subplane */
+			aux_stride = fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED ?
+				stride / 2 : stride;
+		}
 	}
 	plane_offset = y_offset << 16 | x_offset;
 
@@ -3162,11 +3189,14 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
 	I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
 	I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
 	I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
+	I915_WRITE(PLANE_AUX_DIST(pipe, 0), aux_dist | aux_stride);
+	I915_WRITE(PLANE_AUX_OFFSET(pipe, 0), aux_y_offset << 16 | aux_x_offset);
 
 	if (scaler_id >= 0) {
 		uint32_t ps_ctrl = 0;
 
 		WARN_ON(!dst_w || !dst_h);
+
 		ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
 			crtc_state->scaler_state.scalers[scaler_id].mode;
 		I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
@@ -3175,6 +3205,7 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
 		I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) | dst_h);
 		I915_WRITE(PLANE_POS(pipe, 0), 0);
 	} else {
+		WARN_ON(fb->pixel_format == DRM_FORMAT_NV12);
 		I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
 	}
 
@@ -11626,6 +11657,12 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
 	bool turn_off, turn_on, visible, was_visible;
 	struct drm_framebuffer *fb = plane_state->fb;
 
+	/* Adjust (macro)pixel boundary */
+	if (fb && intel_format_is_yuv(fb->pixel_format)) {
+		to_intel_plane_state(plane_state)->src.x1 &= ~0x10000;
+		to_intel_plane_state(plane_state)->src.x2 &= ~0x10000;
+	}
+
 	if (crtc_state && INTEL_INFO(dev)->gen >= 9 &&
 	    plane->type != DRM_PLANE_TYPE_CURSOR) {
 		ret = skl_update_scaler_plane(
-- 
1.7.9.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux