From: "Thulasimani,Sivakumar" <sivakumar.thulasimani@xxxxxxxxx>
This patch removes TP3 support on CHV since there is no support
for HBR2 on this platform.
v2: rename the function to indicate it checks source rates (Jani)
v3: update comment to indicate TP3 dependancy on HBR2 supported
hardware (Jani)
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 31 +++++++++++++++++++++++--------
1 file changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 475d8cb..051614a 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1207,6 +1207,20 @@ intel_dp_sink_rates(struct intel_dp *intel_dp, const int **sink_rates)
return (intel_dp_max_link_bw(intel_dp) >> 3) + 1;
}
+static bool intel_dp_source_supports_hbr2(struct drm_device *dev)
+{
+ /* WaDisableHBR2:skl */
+ if (IS_SKYLAKE(dev) && INTEL_REVID(dev) <= SKL_REVID_B0)
+ return false;
+
+ if ((IS_HASWELL(dev) && !IS_HSW_ULX(dev)) || IS_BROADWELL(dev) ||
+ (INTEL_INFO(dev)->gen >= 9))
+ return true;
+ else
+ return false;
+}
+
+
static int
intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
{
@@ -1220,12 +1234,8 @@ intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
*source_rates = default_rates;
- /* WaDisableHBR2:skl */
- if (IS_SKYLAKE(dev) && INTEL_REVID(dev) <= SKL_REVID_B0)
- return (DP_LINK_BW_2_7 >> 3) + 1;
-
- if ((IS_HASWELL(dev) && !IS_HSW_ULX(dev)) || IS_BROADWELL(dev) ||
- (INTEL_INFO(dev)->gen >= 9))
+ /* This depends on the fact that 5.4 is last value in the array */
+ if (intel_dp_source_supports_hbr2(dev))
return (DP_LINK_BW_5_4 >> 3) + 1;
else
return (DP_LINK_BW_2_7 >> 3) + 1;
@@ -3923,10 +3933,15 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
}
}
- /* Training Pattern 3 support, both source and sink */
+ /* Training Pattern 3 support, Intel platforms that support HBR2 alone
+ * have support for TP3 hence that check is used along with dpcd check
+ * to ensure TP3 can be enabled.
+ * SKL < B0: due it's WaDisableHBR2 is the only exception where TP3 is
+ * supported but still not enabled.
+ */
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x12 &&
intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED &&
- (IS_HASWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 8)) {
+ intel_dp_source_supports_hbr2(dev)) {
intel_dp->use_tps3 = true;
DRM_DEBUG_KMS("Displayport TPS3 supported\n");
} else
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
