There is currently conflicting documentation on which steppings the workaround is needed, up to C vs. forever. However there is post-C stepping hardware that doesn't report port presence on DDI A, leading to black screen on eDP. Assume the strap isn't connected, and try to enable DDI A on these machines. (We'll still check the VBT for the info in DDI init.) Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Cc: Mika Westerberg <mika.westerberg@xxxxxxxxx> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx> --- drivers/gpu/drm/i915/intel_display.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 21aa745caed1..aa208a2cfafc 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -13949,8 +13949,7 @@ static void intel_setup_outputs(struct drm_device *dev) */ found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED; /* WaIgnoreDDIAStrap: skl */ - if (found || - (IS_SKYLAKE(dev) && INTEL_REVID(dev) < SKL_REVID_D0)) + if (found || IS_SKYLAKE(dev)) intel_ddi_init(dev, PORT_A); /* DDI B, C and D detection is indicated by the SFUSE_STRAP -- 2.1.4 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
