Re: [PATCH 1/3] drm/i915: Dont enable hpd for eDP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 10 Aug 2015, Sivakumar Thulasimani <sivakumar.thulasimani@xxxxxxxxx> wrote:
> On 8/10/2015 5:07 PM, Jani Nikula wrote:
>> On Mon, 10 Aug 2015, Sivakumar Thulasimani <sivakumar.thulasimani@xxxxxxxxx> wrote:
>>> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@xxxxxxxxx>
>>>
>>> On 8/10/2015 10:35 AM, Sonika Jindal wrote:
>>>> With HPD support added for all ports including PORT_A, setting hpd_pin will
>>>> result in enabling of hpd to edp as well. There is no need to enable HPD on
>>>> PORT_A hence this patch removes hpd_pin update for PORT_A, where edp will
>>>> be connected. it can be added back when required
>> What? You can't just go ahead and remove HPD from eDP sinks.
>>
>> BR,
>> Jani.
> Nope, we are not removing HPD for edp sinks, it was never there in the 
> first place. It was
> enabled for CHV (even there by mistake since PORT B/C was both DP and 
> eDP) but it was
> never there for any other plaforms nor is it used for any purpose (PSR 
> must use it, but i
> dont see code for it as well).

Are you saying there's no HPD enabled in our *hardware* for eDP? Or
driver?

My point is, is this patch making it harder to enable eDP hpd handling
(e.g. for PSR or DP link re-training) in the future? We currently take
it into account in a few places, and if we start removing that, it will
be a loss of effort to first remove and then add it back.

BR,
Jani.



>>
>>>> Signed-off-by: Sonika Jindal <sonika.jindal@xxxxxxxxx>
>>>> ---
>>>>    drivers/gpu/drm/i915/intel_dp.c |    2 +-
>>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>>>> index fcc64e5..5a614c9 100644
>>>> --- a/drivers/gpu/drm/i915/intel_dp.c
>>>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>>>> @@ -5784,7 +5784,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
>>>>    	/* Set up the hotplug pin. */
>>>>    	switch (port) {
>>>>    	case PORT_A:
>>>> -		intel_encoder->hpd_pin = HPD_PORT_A;
>>>> +		/* Not enabling edp interrupts */
>>>>    		break;
>>>>    	case PORT_B:
>>>>    		intel_encoder->hpd_pin = HPD_PORT_B;
>>> -- 
>>> regards,
>>> Sivakumar
>>>
>>> _______________________________________________
>>> Intel-gfx mailing list
>>> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
>>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> -- 
> regards,
> Sivakumar
>

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux