Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@xxxxxxxxx>
On 8/10/2015 10:35 AM, Sonika Jindal wrote:
WA for BXT A0/A1, where DDIB's HPD pin is swapped to DDIA, so enabling
DDIA HPD pin in place of DDIB.
v2: For DP, irq_port is used to determine the encoder instead of
hpd_pin and removing the edp HPD logic because port A HPD is not
present(Imre)
v3: Rebased on top of Imre's patchset for enabling HPD on PORT A.
Added hpd_pin swapping for intel_dp_init_connector, setting encoder
for PORT_A as per the WA in irq_port (Imre)
v4: Dont enable interrupt for edp, also reframe the description (Siva)
v5: Don’t check for PORT_A in intel_ddi_init to update dig_port,
instead avoid setting hpd_pin itself (Imre)
Signed-off-by: Sonika Jindal <sonika.jindal@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_ddi.c | 10 +++++++++-
drivers/gpu/drm/i915/intel_dp.c | 2 ++
drivers/gpu/drm/i915/intel_hdmi.c | 9 ++++++++-
3 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index e2c6f73..777e3a3 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -3225,7 +3225,15 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
goto err;
intel_dig_port->hpd_pulse = intel_dp_hpd_pulse;
- dev_priv->hotplug.irq_port[port] = intel_dig_port;
+ /*
+ * On BXT A0/A1, sw needs to activate DDIA HPD logic and
+ * interrupts to check the external panel connection.
+ */
+ if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0)
+ && port == PORT_B)
+ dev_priv->hotplug.irq_port[PORT_A] = intel_dig_port;
+ else
+ dev_priv->hotplug.irq_port[port] = intel_dig_port;
}
/* In theory we don't need the encoder->type check, but leave it just in
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5a614c9..7fab3e5 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5788,6 +5788,8 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
break;
case PORT_B:
intel_encoder->hpd_pin = HPD_PORT_B;
+ if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
+ intel_encoder->hpd_pin = HPD_PORT_A;
break;
case PORT_C:
intel_encoder->hpd_pin = HPD_PORT_C;
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 70bad5b..94fa716 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1973,7 +1973,14 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
intel_hdmi->ddc_bus = GMBUS_PIN_1_BXT;
else
intel_hdmi->ddc_bus = GMBUS_PIN_DPB;
- intel_encoder->hpd_pin = HPD_PORT_B;
+ /*
+ * On BXT A0/A1, sw needs to activate DDIA HPD logic and
+ * interrupts to check the external panel connection.
+ */
+ if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
+ intel_encoder->hpd_pin = HPD_PORT_A;
+ else
+ intel_encoder->hpd_pin = HPD_PORT_B;
break;
case PORT_C:
if (IS_BROXTON(dev_priv))
--
regards,
Sivakumar
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
