Re: [SKL-DMC-BUGFIX 3/5] drm/i915/skl: Do not disable cdclk PLL if csr firmware is present.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 8/5/2015 2:42 PM, Daniel Vetter wrote:
On Mon, Aug 03, 2015 at 09:55:34PM +0530, Animesh Manna wrote:
While display engine entering into low power state no need to disable
cdclk pll as CSR firmware of dmc will take care. If pll is already
enabled firmware execution sequence will be blocked. This is one
of the criteria for dmc to work properly.

Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
Cc: Damien Lespiau <damien.lespiau@xxxxxxxxx>
Cc: Imre Deak <imre.deak@xxxxxxxxx>
Cc: Sunil Kamath <sunil.kamath@xxxxxxxxx>
Signed-off-by: Animesh Manna <animesh.manna@xxxxxxxxx>
Signed-off-bt: Vathsala Nagaraju <vathsala.nagaraju@xxxxxxxxx>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@xxxxxxxxx>
---
  drivers/gpu/drm/i915/intel_display.c | 11 +++++++----
  1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index af0bcfe..ef2ef4d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5675,10 +5675,13 @@ void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
  	if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
  		DRM_ERROR("DBuf power disable timeout\n");
- /* disable DPLL0 */
-	I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
-	if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
-		DRM_ERROR("Couldn't disable DPLL0\n");
+	if (dev_priv->csr.dmc_payload) {
+		/* disable DPLL0 */
Imo this needs a proper comment (and the current one is useless since it
just states exactly what the code does and is redundant). What about

	/* DMC assumes ownership of LCPLL and will get confused if we
	 * touch it. */

instead before the if?
-Daniel

Agree, I will add it in my next patch.
(Current comment came from existing code.)

- Animesh


+		I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) &
+					~LCPLL_PLL_ENABLE);
+		if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
+			DRM_ERROR("Couldn't disable DPLL0\n");
+	}
intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
  }
--
2.0.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux