On Mon, 2015-07-27 at 10:36 +0200, Daniel Vetter wrote:
> On Fri, Jul 24, 2015 at 04:42:27PM -0700, Rodrigo Vivi wrote:
> > Since active function on VLV immediately activate PSR let's give more
> > time for idleness. Different from core platforms where we have idle_frames
> > count.
> >
> > Also kms_psr_sink_crc now is automated and always get this:
> >
> > [drm:intel_enable_pipe] enabling pipe A
> > [drm:intel_edp_backlight_on]
> > [drm:intel_panel_enable_backlight] pipe
> > [drm:intel_panel_enable_backlight] pipe A
> > [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
> >
> > PSR gets enabled somewhere here after backlight.
> >
> > [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000000, dig 0x0
> > [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
> > [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=391, cursor=63, sp
> >
> > PSR gets flushed around here by intel_atomic_commit
> >
> > [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
> > [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=391, cursor=63, sp
> > [drm:intel_set_memory_cxsr] memory self-refresh is enabled
> > [drm:intel_connector_check_state] [CONNECTOR:39:eDP-1]
> > [drm:check_encoder_state] [ENCODER:30:DAC-30]
> > [drm:check_encoder_state] [ENCODER:31:TMDS-31]
> > [drm:check_encoder_state] [ENCODER:36:TMDS-36]
> > [drm:check_encoder_state] [ENCODER:38:TMDS-38]
> > [drm:check_crtc_state] [CRTC:21]
> > [drm:check_crtc_state] [CRTC:26]
> > [drm:intel_psr_activate [i915]] *ERROR* PSR Active
> > [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000000, dig 0x
> > [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* pipe A underrun
> > [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO
> > Underrun.
> >
> > It is true that in a product we won't keep disabling and enabling planes so
> > frequently, but for safeness let's stay conservative.
> >
> > It is also true that 500ms is an etternity. But PSR is anyway a power saving
> > feature for idle scenario. So if it is idle feature stays on and 500ms to get
> > it reanabled is not that insane.
> >
> > v2: Rebase over intel_psr.c and fix typo.
> > v3: Revival: Manual tests indicated that this is needed. With a short delay
> > there is a huge risk of getting blank screens when planes are being enabled.
> > v4: Revival 2 with reasonable delay. 1/2 sec instead of 5. VBT is 10 sec but
> > actually time for link training what we aren't doing, but with only 100 sec
> > in some cases kms_psr_sink_crc manual was showing blank screen,
> > so let's use this for now. Also changed comment by a FIXME.
> > v5: Rebase after a long time, remove FIXME and update comment above.
> > v6: msecs_to_jiffies is already on delay. remove duplication.
> >
> > Reviewed-by: Durgadoss R <durgadoss.r@xxxxxxxxx> (v4)
> > Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/intel_psr.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
> > index acd8ec8..bec13b8 100644
> > --- a/drivers/gpu/drm/i915/intel_psr.c
> > +++ b/drivers/gpu/drm/i915/intel_psr.c
> > @@ -698,6 +698,7 @@ void intel_psr_flush(struct drm_device *dev,
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > struct drm_crtc *crtc;
> > enum pipe pipe;
> > + int delay = msecs_to_jiffies(HAS_DDI(dev) ? 100 : 500);
>
> Note that for a timeout you should be using our own
> msecs_to_jiffies_timeout if it's for a timeout. This is needed since you
> can't know when the next jiffy update happens and that might be right
> away, therefore waiting for 10 jiffies might only be a wait for 9/HZ.
> Anyway tiny nitpick.
This is actually only used on schedule_delayed_work that receives the
numer of jiffies to wait.
I believe to avoid confusion I should let the msecs_to_jiffies on
schedule_delayed_work only and delay in ms. Do you want another v++?
> -Daniel
>
> >
> > mutex_lock(&dev_priv->psr.lock);
> > if (!dev_priv->psr.enabled) {
> > @@ -732,8 +733,7 @@ void intel_psr_flush(struct drm_device *dev,
> > }
> >
> > if (!dev_priv->psr.active && !dev_priv->psr.busy_frontbuffer_bits)
> > - schedule_delayed_work(&dev_priv->psr.work,
> > - msecs_to_jiffies(100));
> > + schedule_delayed_work(&dev_priv->psr.work, delay);
> > mutex_unlock(&dev_priv->psr.lock);
> > }
> >
> > --
> > 1.9.3
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
