On Thu, Jul 09, 2015 at 07:29:05PM +0100, Dave Gordon wrote:
> From: Alex Dai <yu.dai@xxxxxxxxx>
>
> This fetches the required firmware image from the filesystem,
> then loads it into the GuC's memory via a dedicated DMA engine.
>
> This patch is derived from GuC loading work originally done by
> Vinit Azad and Ben Widawsky.
>
> v2:
> Various improvements per review comments by Chris Wilson
>
> v3:
> Removed 'wait' parameter to intel_guc_ucode_load() as firmware
> prefetch is no longer supported in the common firmware loader,
> per Daniel Vetter's request.
> Firmware checker callback fn now returns errno rather than bool.
>
> v4:
> Squash uC-independent code into GuC-specifc loader [Daniel Vetter]
> Don't keep the driver working (by falling back to execlist mode)
> if GuC firmware loading fails [Daniel Vetter]
>
> Issue: VIZ-4884
> Signed-off-by: Alex Dai <yu.dai@xxxxxxxxx>
> Signed-off-by: Dave Gordon <david.s.gordon@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/Makefile | 3 +
> drivers/gpu/drm/i915/i915_dma.c | 4 +
> drivers/gpu/drm/i915/i915_drv.h | 11 +
> drivers/gpu/drm/i915/i915_gem.c | 13 +
> drivers/gpu/drm/i915/i915_reg.h | 4 +-
> drivers/gpu/drm/i915/intel_guc.h | 67 ++++
> drivers/gpu/drm/i915/intel_guc_loader.c | 536 ++++++++++++++++++++++++++++++++
> 7 files changed, 637 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/i915/intel_guc.h
> create mode 100644 drivers/gpu/drm/i915/intel_guc_loader.c
>
> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> index de21965..e604cfe 100644
> --- a/drivers/gpu/drm/i915/Makefile
> +++ b/drivers/gpu/drm/i915/Makefile
> @@ -39,6 +39,9 @@ i915-y += i915_cmd_parser.o \
> intel_ringbuffer.o \
> intel_uncore.o
>
> +# general-purpose microcontroller (GuC) support
> +i915-y += intel_guc_loader.o
> +
> # autogenerated null render state
> i915-y += intel_renderstate_gen6.o \
> intel_renderstate_gen7.o \
> diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> index 066c34c..958ab4f 100644
> --- a/drivers/gpu/drm/i915/i915_dma.c
> +++ b/drivers/gpu/drm/i915/i915_dma.c
> @@ -472,6 +472,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
>
> cleanup_gem:
> mutex_lock(&dev->struct_mutex);
> + intel_guc_ucode_fini(dev);
> i915_gem_cleanup_ringbuffer(dev);
> i915_gem_context_fini(dev);
> mutex_unlock(&dev->struct_mutex);
> @@ -869,6 +870,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
>
> intel_uncore_init(dev);
>
> + intel_guc_ucode_init(dev);
> +
> /* Load CSR Firmware for SKL */
> intel_csr_ucode_init(dev);
>
> @@ -1120,6 +1123,7 @@ int i915_driver_unload(struct drm_device *dev)
> flush_workqueue(dev_priv->wq);
>
> mutex_lock(&dev->struct_mutex);
> + intel_guc_ucode_fini(dev);
> i915_gem_cleanup_ringbuffer(dev);
> i915_gem_context_fini(dev);
> mutex_unlock(&dev->struct_mutex);
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 4a512da..15b9202 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -50,6 +50,7 @@
> #include <linux/intel-iommu.h>
> #include <linux/kref.h>
> #include <linux/pm_qos.h>
> +#include "intel_guc.h"
>
> /* General customization:
> */
> @@ -1694,6 +1695,8 @@ struct drm_i915_private {
>
> struct i915_virtual_gpu vgpu;
>
> + struct intel_guc guc;
> +
> struct intel_csr csr;
>
> /* Display CSR-related protection */
> @@ -1938,6 +1941,11 @@ static inline struct drm_i915_private *dev_to_i915(struct device *dev)
> return to_i915(dev_get_drvdata(dev));
> }
>
> +static inline struct drm_i915_private *guc_to_i915(struct intel_guc *guc)
> +{
> + return container_of(guc, struct drm_i915_private, guc);
> +}
> +
> /* Iterate over initialised rings */
> #define for_each_ring(ring__, dev_priv__, i__) \
> for ((i__) = 0; (i__) < I915_NUM_RINGS; (i__)++) \
> @@ -2543,6 +2551,9 @@ struct drm_i915_cmd_table {
>
> #define HAS_CSR(dev) (IS_SKYLAKE(dev))
>
> +#define HAS_GUC_UCODE(dev) (IS_GEN9(dev))
> +#define HAS_GUC_SCHED(dev) (IS_GEN9(dev))
> +
> #define HAS_RESOURCE_STREAMER(dev) (IS_HASWELL(dev) || \
> INTEL_INFO(dev)->gen >= 8)
>
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index dbbb649..e020309 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -5074,6 +5074,19 @@ i915_gem_init_hw(struct drm_device *dev)
> goto out;
> }
>
> + /* We can't enable contexts until all firmware is loaded */
> + ret = intel_guc_ucode_load(dev);
> +
> + /*
> + * If we got an error and GuC submission is enabled, map
> + * the error to -EIO so the GPU will be declared wedged.
> + * OTOH, if we didn't intend to use the GuC anyway, just
> + * discard the error and carry on.
> + */
> + ret = ret && i915.enable_guc_submission ? -EIO : 0;
> + if (ret)
> + goto out;
> +
> /* Now it is safe to go back round and do everything else: */
> for_each_ring(ring, dev_priv, i) {
> struct drm_i915_gem_request *req;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 2a29bcc..63728c1 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6843,7 +6843,9 @@ enum skl_disp_power_wells {
> #define GEN9_PGCTL_SSB_EU311_ACK (1 << 14)
>
> #define GEN7_MISCCPCTL (0x9424)
> -#define GEN7_DOP_CLOCK_GATE_ENABLE (1<<0)
> +#define GEN7_DOP_CLOCK_GATE_ENABLE (1<<0)
> +#define GEN8_DOP_CLOCK_GATE_CFCLK_ENABLE (1<<2)
> +#define GEN8_DOP_CLOCK_GATE_GUC_ENABLE (1<<4)
>
> /* IVYBRIDGE DPF */
> #define GEN7_L3CDERRST1 0xB008 /* L3CD Error Status 1 */
> diff --git a/drivers/gpu/drm/i915/intel_guc.h b/drivers/gpu/drm/i915/intel_guc.h
> new file mode 100644
> index 0000000..2846b6d
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/intel_guc.h
> @@ -0,0 +1,67 @@
> +/*
> + * Copyright © 2014 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +#ifndef _INTEL_GUC_H_
> +#define _INTEL_GUC_H_
> +
> +#include "intel_guc_fwif.h"
> +#include "i915_guc_reg.h"
> +
> +enum intel_guc_fw_status {
> + GUC_FIRMWARE_FAIL = -1,
> + GUC_FIRMWARE_NONE = 0,
> + GUC_FIRMWARE_PENDING,
> + GUC_FIRMWARE_SUCCESS
> +};
> +
> +/*
> + * This structure encapsulates all the data needed during the process
> + * of fetching, caching, and loading the firmware image into the GuC.
> + */
> +struct intel_guc_fw {
> + struct drm_device * guc_dev;
> + const char * guc_fw_path;
> + size_t guc_fw_size;
> + struct drm_i915_gem_object * guc_fw_obj;
> + enum intel_guc_fw_status guc_fw_fetch_status;
> + enum intel_guc_fw_status guc_fw_load_status;
> +
> + uint16_t guc_fw_major_wanted;
> + uint16_t guc_fw_minor_wanted;
> + uint16_t guc_fw_major_found;
> + uint16_t guc_fw_minor_found;
> +};
> +
> +struct intel_guc {
> + struct intel_guc_fw guc_fw;
> +
> + uint32_t log_flags;
> +};
> +
> +/* intel_guc_loader.c */
> +extern void intel_guc_ucode_init(struct drm_device *dev);
> +extern int intel_guc_ucode_load(struct drm_device *dev);
> +extern void intel_guc_ucode_fini(struct drm_device *dev);
> +extern const char *intel_guc_fw_status_repr(enum intel_guc_fw_status status);
> +
> +#endif
> diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
> new file mode 100644
> index 0000000..2080bca
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/intel_guc_loader.c
> @@ -0,0 +1,536 @@
> +/*
> + * Copyright © 2014 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + * Authors:
> + * Vinit Azad <vinit.azad@xxxxxxxxx>
> + * Ben Widawsky <ben@xxxxxxxxxxxx>
> + * Dave Gordon <david.s.gordon@xxxxxxxxx>
> + * Alex Dai <yu.dai@xxxxxxxxx>
> + */
> +#include <linux/firmware.h>
> +#include "i915_drv.h"
> +#include "intel_guc.h"
> +
> +/**
> + * DOC: GuC
> + *
> + * intel_guc:
> + * Top level structure of guc. It handles firmware loading and manages client
> + * pool and doorbells. intel_guc owns a i915_guc_client to replace the legacy
> + * ExecList submission.
> + *
> + * Firmware versioning:
> + * The firmware build process will generate a version header file with major and
> + * minor version defined. The versions are built into CSS header of firmware.
> + * i915 kernel driver set the minimal firmware version required per platform.
> + * The firmware installation package will install (symbolic link) proper version
> + * of firmware.
> + *
> + * GuC address space:
> + * GuC does not allow any gfx GGTT address that falls into range [0, WOPCM_TOP),
> + * which is reserved for Boot ROM, SRAM and WOPCM. Currently this top address is
> + * 512K. In order to exclude 0-512K address space from GGTT, all gfx objects
> + * used by GuC is pinned with PIN_OFFSET_BIAS along with size of WOPCM.
> + *
> + * Firmware log:
> + * Firmware log is enabled by setting i915.guc_log_level to non-negative level.
> + * Log data is printed out via reading debugfs i915_guc_log_dump. Reading from
> + * i915_guc_load_status will print out firmware loading status and scratch
> + * registers value.
> + *
> + */
> +
> +#define I915_SKL_GUC_UCODE "i915/skl_guc_ver3.bin"
> +MODULE_FIRMWARE(I915_SKL_GUC_UCODE);
> +
> +/* User-friendly representation of an enum */
> +const char *intel_guc_fw_status_repr(enum intel_guc_fw_status status)
> +{
> + switch (status) {
> + case GUC_FIRMWARE_FAIL:
> + return "FAIL";
> + case GUC_FIRMWARE_NONE:
> + return "NONE";
> + case GUC_FIRMWARE_PENDING:
> + return "PENDING";
> + case GUC_FIRMWARE_SUCCESS:
> + return "SUCCESS";
> + default:
> + return "UNKNOWN!";
> + }
> +};
> +
> +static u32 get_gttype(struct drm_i915_private *dev_priv)
> +{
> + /* XXX: GT type based on PCI device ID? field seems unused by fw */
> + return 0;
> +}
> +
> +static u32 get_core_family(struct drm_i915_private *dev_priv)
> +{
> + switch (INTEL_INFO(dev_priv)->gen) {
> + case 8:
> + return GFXCORE_FAMILY_GEN8;
[TOR:] Should Gen 8 case be included here if only Gen 9 is supported?
> + case 9:
> + return GFXCORE_FAMILY_GEN9;
> + default:
> + DRM_ERROR("GUC: unknown gen for scheduler init\n");
> + return GFXCORE_FAMILY_FORCE_ULONG;
> + }
> +}
> +
> +static void set_guc_init_params(struct drm_i915_private *dev_priv)
> +{
> + struct intel_guc *guc = &dev_priv->guc;
> + u32 params[GUC_CTL_MAX_DWORDS];
> + int i;
> +
> + memset(¶ms, 0, sizeof(params));
> +
> + params[GUC_CTL_DEVICE_INFO] |=
> + (get_gttype(dev_priv) << GUC_CTL_GTTYPE_SHIFT) |
> + (get_core_family(dev_priv) << GUC_CTL_COREFAMILY_SHIFT);
> +
> + /* GuC ARAT increment is 10 ns. GuC default scheduler quantum is one
> + * second. This ARAR is calculated by:
> + * Scheduler-Quantum-in-ns / ARAT-increment-in-ns = 1000000000 / 10
> + */
> + params[GUC_CTL_ARAT_HIGH] = 0;
> + params[GUC_CTL_ARAT_LOW] = 100000000;
> +
> + params[GUC_CTL_WA] |= GUC_CTL_WA_UK_BY_DRIVER;
> +
> + params[GUC_CTL_FEATURE] |= GUC_CTL_DISABLE_SCHEDULER |
> + GUC_CTL_VCS2_ENABLED;
> +
> + if (i915.guc_log_level >= 0) {
> + params[GUC_CTL_LOG_PARAMS] = guc->log_flags;
> + params[GUC_CTL_DEBUG] =
> + i915.guc_log_level << GUC_LOG_VERBOSITY_SHIFT;
> + }
> +
> + I915_WRITE(SOFT_SCRATCH(0), 0);
> +
> + for (i = 0; i < GUC_CTL_MAX_DWORDS; i++)
> + I915_WRITE(SOFT_SCRATCH(1 + i), params[i]);
> +}
> +
> +/*
> + * Read the GuC status register (GUC_STATUS) and store it in the
> + * specified location; then return a boolean indicating whether
> + * the value matches either of two values representing completion
> + * of the GuC boot process.
> + *
> + * This is used for polling the GuC status in a wait_for_atomic()
> + * loop below.
> + */
> +static inline bool guc_ucode_response(struct drm_i915_private *dev_priv,
> + u32 *status)
> +{
> + u32 val = I915_READ(GUC_STATUS);
> + *status = val;
> + return ((val & GS_UKERNEL_MASK) == GS_UKERNEL_READY ||
> + (val & GS_UKERNEL_MASK) == GS_UKERNEL_LAPIC_DONE);
> +}
> +
> +/*
> + * Transfer the firmware image to RAM for execution by the microcontroller.
> + *
> + * GuC Firmware layout:
> + * +-------------------------------+ ----
> + * | CSS header | 128B
> + * | contains major/minor version |
> + * +-------------------------------+ ----
> + * | uCode |
> + * +-------------------------------+ ----
> + * | RSA signature | 256B
> + * +-------------------------------+ ----
> + * | RSA public Key | 256B
> + * +-------------------------------+ ----
> + * | Public key modulus | 4B
> + * +-------------------------------+ ----
> + *
> + * Architecturally, the DMA engine is bidirectional, and can potentially even
> + * transfer between GTT locations. This functionality is left out of the API
> + * for now as there is no need for it.
> + *
> + * Note that GuC needs the CSS header plus uKernel code to be copied by the
> + * DMA engine in one operation, whereas the RSA signature is loaded via MMIO.
> + */
> +
> +#define UOS_CSS_HEADER_OFFSET 0
> +#define UOS_VER_MINOR_OFFSET 0x44
> +#define UOS_VER_MAJOR_OFFSET 0x46
> +#define UOS_CSS_HEADER_SIZE 0x80
> +#define UOS_RSA_SIG_SIZE 0x100
> +#define UOS_CSS_SIGNING_SIZE 0x204
> +
> +static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv)
> +{
> + struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
> + struct drm_i915_gem_object *fw_obj = guc_fw->guc_fw_obj;
> + unsigned long offset;
> + struct sg_table *sg = fw_obj->pages;
> + u32 status, ucode_size, rsa[UOS_RSA_SIG_SIZE / sizeof(u32)];
> + int i, ret = 0;
> +
> + /* uCode size, also is where RSA signature starts */
> + offset = ucode_size = guc_fw->guc_fw_size - UOS_CSS_SIGNING_SIZE;
> +
> + /* Copy RSA signature from the fw image to HW for verification */
> + sg_pcopy_to_buffer(sg->sgl, sg->nents, rsa, UOS_RSA_SIG_SIZE, offset);
> + for (i = 0; i < UOS_RSA_SIG_SIZE / sizeof(u32); i++)
> + I915_WRITE(UOS_RSA_SCRATCH_0 + i * sizeof(u32), rsa[i]);
> +
> + /* Set the source address for the new blob */
> + offset = i915_gem_obj_ggtt_offset(fw_obj);
> + I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
> + I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
> +
> + /* Set the destination. Current uCode expects an 8k stack starting from
> + * offset 0. */
> + I915_WRITE(DMA_ADDR_1_LOW, 0x2000);
> +
> + /* XXX: The image is automatically transfered to SRAM after the RSA
> + * verification. This is why the address space is chosen as such. */
> + I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
> +
> + I915_WRITE(DMA_COPY_SIZE, ucode_size);
> +
> + /* Finally start the DMA */
> + I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
> +
> + /*
> + * Spin-wait for the DMA to complete & the GuC to start up.
> + * NB: Docs recommend not using the interrupt for completion.
> + * Measurements indicate this should take no more than 20ms, so a
> + * timeout here indicates that the GuC has failed and is unusable.
> + * (Higher levels of the driver will attempt to fall back to
> + * execlist mode if this happens.)
> + */
> + ret = wait_for_atomic(guc_ucode_response(dev_priv, &status), 100);
> +
> + DRM_DEBUG_DRIVER("DMA status 0x%x, GuC status 0x%x\n",
> + I915_READ(DMA_CTRL), status);
> +
> + if ((status & GS_BOOTROM_MASK) == GS_BOOTROM_RSA_FAILED) {
> + DRM_ERROR("GuC firmware signature verification failed\n");
> + ret = -ENOEXEC;
> + }
> +
> + DRM_DEBUG_DRIVER("returning %d\n", ret);
> +
> + return ret;
> +}
> +
> +/*
> + * Load the GuC firmware blob into the MinuteIA.
> + */
> +static int guc_ucode_xfer(struct drm_i915_private *dev_priv)
> +{
> + struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
> + struct drm_device *dev = dev_priv->dev;
> + int ret;
> +
> + ret = i915_gem_object_set_to_gtt_domain(guc_fw->guc_fw_obj, false);
> + if (ret) {
> + DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
> + return ret;
> + }
> +
> + ret = i915_gem_obj_ggtt_pin(guc_fw->guc_fw_obj, 0, 0);
> + if (ret) {
> + DRM_DEBUG_DRIVER("pin failed %d\n", ret);
> + return ret;
> + }
> +
> + intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
> +
> + /* init WOPCM */
> + I915_WRITE(GUC_WOPCM_SIZE, GUC_WOPCM_SIZE_VALUE);
> + I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET);
> +
> + /* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
> + I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
> +
> + /* Set MMIO/WA for GuC init */
> + I915_WRITE(DRBMISC1, DOORBELL_ENABLE);
[TOR:] Should this DOORBELL_ENABLE be dropped? A note in
the BSpec indicates this is not needed, but also it should
be harmless.
> +
> + /* Enable MIA caching. GuC clock gating is disabled. */
> + I915_WRITE(GUC_SHIM_CONTROL, GUC_SHIM_CONTROL_VALUE);
[TOR:] Should guc clock gating be enabled? A note in the
BSpec indicates this should be disabled for certain
pre-production steppings; this note may not apply to later
steppings. Normally, the driver would enable guc clock
gating (bit 15, GUC_ENABLE_MIA_CLOCK_GATING).
> +
> + /* WaC6DisallowByGfxPause*/
> + I915_WRITE(GEN6_GFXPAUSE, 0x30FFF);
> +
> + if (IS_SKYLAKE(dev))
> + I915_WRITE(GEN9_GT_PM_CONFIG, GEN8_GT_DOORBELL_ENABLE);
> + else
> + I915_WRITE(GEN8_GT_PM_CONFIG, GEN8_GT_DOORBELL_ENABLE);
[TOR:] Would a comment be helpful here? This line is correct
for Broxton (Gen 9 and not Skylake) but the constants are
reused from Gen 8.
> +
> + if (IS_GEN9(dev)) {
> + /* DOP Clock Gating Enable for GuC clocks */
> + I915_WRITE(GEN7_MISCCPCTL, (GEN8_DOP_CLOCK_GATE_GUC_ENABLE |
> + I915_READ(GEN7_MISCCPCTL)));
> +
> + /* allows for 5us before GT can go to RC6 */
> + I915_WRITE(GUC_ARAT_C6DIS, 0x1FF);
> + }
> +
> + set_guc_init_params(dev_priv);
> +
> + ret = guc_ucode_xfer_dma(dev_priv);
> +
> + intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
> +
> + /*
> + * We keep the object pages for reuse during resume. But we can unpin it
> + * now that DMA has completed, so it doesn't continue to take up space.
> + */
> + i915_gem_object_ggtt_unpin(guc_fw->guc_fw_obj);
> +
> + return ret;
> +}
> +
> +static void guc_fw_fetch(struct drm_device *dev, struct intel_guc_fw *guc_fw)
> +{
> + struct drm_i915_gem_object *obj;
> + const struct firmware *fw;
> + const u8 *css_header;
> + const size_t minsize = UOS_CSS_HEADER_SIZE + UOS_CSS_SIGNING_SIZE;
> + const size_t maxsize = GUC_WOPCM_SIZE_VALUE + UOS_CSS_SIGNING_SIZE
> + - 0x8000; /* 32k reserved (8K stack + 24k context) */
> +
> + DRM_DEBUG_DRIVER("before requesting firmware: GuC fw fetch status %s\n",
> + intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status));
> +
> + if (request_firmware(&fw, guc_fw->guc_fw_path, &dev->pdev->dev))
> + goto fail;
> + if (!fw)
> + goto fail;
> +
> + DRM_DEBUG_DRIVER("fetch GuC fw from %s succeeded, fw %p\n",
> + guc_fw->guc_fw_path, fw);
> +
> + DRM_DEBUG_DRIVER("firmware file size %zu (minimum %zu, maximum %zu)\n",
> + fw->size, minsize, maxsize);
> +
> + /* Check the size of the blob befoe examining buffer contents */
> + if (fw->size < minsize || fw->size > maxsize)
> + goto fail;
> +
> + /*
> + * The GuC firmware image has the version number embedded at a well-known
> + * offset within the firmware blob; note that major / minor version are
> + * TWO bytes each (i.e. u16), although all pointers and offsets are defined
> + * in terms of bytes (u8).
> + */
> + css_header = fw->data + UOS_CSS_HEADER_OFFSET;
> + guc_fw->guc_fw_major_found = *(u16 *)(css_header + UOS_VER_MAJOR_OFFSET);
> + guc_fw->guc_fw_minor_found = *(u16 *)(css_header + UOS_VER_MINOR_OFFSET);
> +
> + if (guc_fw->guc_fw_major_found != guc_fw->guc_fw_major_wanted ||
> + guc_fw->guc_fw_minor_found < guc_fw->guc_fw_minor_wanted) {
> + DRM_ERROR("GuC firmware version %d.%d, required %d.%d\n",
> + guc_fw->guc_fw_major_found, guc_fw->guc_fw_minor_found,
> + guc_fw->guc_fw_major_wanted, guc_fw->guc_fw_minor_wanted);
> + goto fail;
> + }
> +
> + DRM_DEBUG_DRIVER("firmware version %d.%d OK (minimum %d.%d)\n",
> + guc_fw->guc_fw_major_found, guc_fw->guc_fw_minor_found,
> + guc_fw->guc_fw_major_wanted, guc_fw->guc_fw_minor_wanted);
> +
> + obj = i915_gem_object_create_from_data(dev, fw->data, fw->size);
> + if (!obj)
> + goto fail;
> +
> + guc_fw->guc_fw_obj = obj;
> + guc_fw->guc_fw_size = fw->size;
> +
> + DRM_DEBUG_DRIVER("GuC fw fetch status SUCCESS, obj %p\n",
> + guc_fw->guc_fw_obj);
> +
> + release_firmware(fw);
> + guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_SUCCESS;
> + return;
> +
> +fail:
> + DRM_DEBUG_DRIVER("GuC fw fetch status FAIL; fw %p, obj %p\n",
> + fw, guc_fw->guc_fw_obj);
> + DRM_ERROR("Failed to fetch GuC firmware from %s\n",
> + guc_fw->guc_fw_path);
> +
> + obj = guc_fw->guc_fw_obj;
> + if (obj)
> + drm_gem_object_unreference(&obj->base);
> + guc_fw->guc_fw_obj = NULL;
> +
> + release_firmware(fw); /* OK even if fw is NULL */
> + guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_FAIL;
> +}
> +
> +/**
> + * intel_guc_ucode_load() - load GuC uCode into the device
> + * @dev: drm device
> + *
> + * Called from gem_init_hw() during driver loading and also after a GPU reset.
> + *
> + * On the first call only, this will fetch the blob from the filesystem;
> + * thereafter, we will already either have the blob in a GEM object, or
> + * have determined that no valid firmware image could be found.
> + *
> + * If we have a good firmware image, transfer it to the h/w.
> + *
> + * Return: non-zero code on error
> + */
> +int intel_guc_ucode_load(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
> + int err = 0;
> +
> + DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
> + intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
> + intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
> +
> + if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_NONE)
> + return 0;
> +
> + if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_SUCCESS &&
> + guc_fw->guc_fw_load_status == GUC_FIRMWARE_FAIL)
> + return -ENOEXEC;
> +
> + guc_fw->guc_fw_load_status = GUC_FIRMWARE_PENDING;
> + if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_PENDING) {
> + /* We only come here once */
> + guc_fw_fetch(dev, guc_fw);
> + /* status must now be FAIL or SUCCESS */
> + }
> +
> + DRM_DEBUG_DRIVER("GuC fw fetch status %s\n",
> + intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status));
> +
> + switch (guc_fw->guc_fw_fetch_status) {
> + case GUC_FIRMWARE_FAIL:
> + /* something went wrong :( */
> + err = -EIO;
> + goto fail;
> +
> + case GUC_FIRMWARE_NONE:
> + case GUC_FIRMWARE_PENDING:
> + default:
> + /* "can't happen" */
> + WARN_ONCE(1, "GuC fw %s invalid guc_fw_fetch_status %s [%d]\n",
> + guc_fw->guc_fw_path,
> + intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
> + guc_fw->guc_fw_fetch_status);
> + err = -ENXIO;
> + goto fail;
> +
> + case GUC_FIRMWARE_SUCCESS:
> + break;
> + }
> +
> + err = guc_ucode_xfer(dev_priv);
> + if (err)
> + goto fail;
> +
> + guc_fw->guc_fw_load_status = GUC_FIRMWARE_SUCCESS;
> +
> + DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
> + intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
> + intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
> +
> + return 0;
> +
> +fail:
> + if (guc_fw->guc_fw_load_status == GUC_FIRMWARE_PENDING)
> + guc_fw->guc_fw_load_status = GUC_FIRMWARE_FAIL;
> +
> + DRM_ERROR("Failed to initialize GuC, error %d\n", err);
> +
> + return err;
> +}
> +
> +/**
> + * intel_guc_ucode_init() - define parameters for fetching firmware
> + * @dev: drm device
> + *
> + * Called early during driver load, before GEM is initialised.
> + * Driver is single threaded, so no mutex is required.
> + *
> + * This just sets parameters for use when intel_guc_ucode_load()
> + * is called later, after GEM initialisation is complete.
> + */
> +void intel_guc_ucode_init(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
> + const char *fw_path;
> +
> + if (!HAS_GUC_SCHED(dev))
> + i915.enable_guc_submission = false;
> +
> + if (!HAS_GUC_UCODE(dev)) {
> + fw_path = NULL;
> + } else if (IS_SKYLAKE(dev)) {
> + fw_path = I915_SKL_GUC_UCODE;
> + guc_fw->guc_fw_major_wanted = 3;
> + guc_fw->guc_fw_minor_wanted = 0;
> + } else {
> + i915.enable_guc_submission = false;
> + fw_path = ""; /* unknown device */
> + }
> +
> + guc_fw->guc_dev = dev;
> + guc_fw->guc_fw_path = fw_path;
> + guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE;
> + guc_fw->guc_fw_load_status = GUC_FIRMWARE_NONE;
> +
> + if (fw_path == NULL)
> + return;
> +
> + if (*fw_path == '\0') {
> + DRM_ERROR("No GuC firmware known for this platform\n");
> + guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_FAIL;
> + return;
> + }
> +
> + guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_PENDING;
> + DRM_DEBUG_DRIVER("GuC firmware pending, path %s\n", fw_path);
> +}
> +
> +/**
> + * intel_guc_ucode_fini() - clean up all allocated resources
> + * @dev: drm device
> + */
> +void intel_guc_ucode_fini(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
> +
> + if (guc_fw->guc_fw_obj)
> + drm_gem_object_unreference(&guc_fw->guc_fw_obj->base);
> + guc_fw->guc_fw_obj = NULL;
> +
> + guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE;
> +}
> --
> 1.9.1
>
[TOR:] I had some questions above. These could be addressed
in later patches.
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@xxxxxxxxx>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
