[PATCH 2/2] drm/i915/bxt: WA for swapped HPD pins in A stepping

[Sonika Jindal <sonika.jindal@xxxxxxxxx>]

As per bspec, on BXT A0/A1, sw needs to activate DDIA HPD logic
and interrupts to check the external panel connection and DDIC HPD
logic for edp panel.

Signed-off-by: Sonika Jindal <sonika.jindal@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_dp.c   |   18 ++++++++++++++++--
 drivers/gpu/drm/i915/intel_hdmi.c |    9 ++++++++-
 2 files changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 7b54b9d..c32f3d3 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5869,10 +5869,24 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	/* Set up the hotplug pin. */
 	switch (port) {
 	case PORT_A:
-		intel_encoder->hpd_pin = HPD_PORT_A;
+		/*
+		 * On BXT A0/A1, sw needs to activate DDIC HPD logic and
+		 * interrupts to check the eDP panel connection.
+		 */
+		if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
+			intel_encoder->hpd_pin = HPD_PORT_C;
+		else
+			intel_encoder->hpd_pin = HPD_PORT_A;
 		break;
 	case PORT_B:
-		intel_encoder->hpd_pin = HPD_PORT_B;
+		/*
+		 * On BXT A0/A1, sw needs to activate DDIA HPD logic and
+		 * interrupts to check the external panel connection.
+		 */
+		if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
+			intel_encoder->hpd_pin = HPD_PORT_A;
+		else
+			intel_encoder->hpd_pin = HPD_PORT_B;
 		break;
 	case PORT_C:
 		intel_encoder->hpd_pin = HPD_PORT_C;
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 44e7160..121e626 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -2011,7 +2011,14 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 			intel_hdmi->ddc_bus = GMBUS_PIN_1_BXT;
 		else
 			intel_hdmi->ddc_bus = GMBUS_PIN_DPB;
-		intel_encoder->hpd_pin = HPD_PORT_B;
+		/*
+		 * On BXT A0/A1, sw needs to activate DDIA HPD logic and
+		 * interrupts to check the external panel connection.
+		 */
+		if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
+			intel_encoder->hpd_pin = HPD_PORT_A;
+		else
+			intel_encoder->hpd_pin = HPD_PORT_B;
 		break;
 	case PORT_C:
 		if (IS_BROXTON(dev_priv))
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx