On Wed, Jul 08, 2015 at 10:40:18AM +0530, Jindal, Sonika wrote:
>
>
> On 7/7/2015 6:51 PM, Ville Syrjälä wrote:
> > On Tue, Jul 07, 2015 at 02:22:20PM +0530, Sonika Jindal wrote:
> >> Writing to PCH_PORT_HOTPLUG for each interrupt is not required.
> >> Handle it only if hpd has actually occurred like we handle other
> >> interrupts.
> >> v2: Make few variables local to if block (Ville)
> >> v3: Add check for ibx/cpt both (Ville).
> >> While at it, remove the redundant check for hotplug_trigger from
> >> pch_get_hpd_pins
> >>
> >> Signed-off-by: Sonika Jindal <sonika.jindal@xxxxxxxxx>
> >> ---
> >> drivers/gpu/drm/i915/i915_irq.c | 32 +++++++++++++++++---------------
> >> 1 file changed, 17 insertions(+), 15 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> >> index a6fbe64..ba2c27c 100644
> >> --- a/drivers/gpu/drm/i915/i915_irq.c
> >> +++ b/drivers/gpu/drm/i915/i915_irq.c
> >> @@ -1266,9 +1266,6 @@ static void pch_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
> >> *pin_mask = 0;
> >> *long_mask = 0;
> >>
> >> - if (!hotplug_trigger)
> >> - return;
> >> -
> >
> > Looks like BXT still depends on that. So you should change that too,
> > or leave this in until someone else does it.
> No, for bxt, this function is called from bxt_hpd_handler which is
> called only when "tmp & BXT_DE_PORT_HOTPLUG_MASK" is non-zero.
> So, it this is fine for bxt.
Oh, right you are. No problem then.
>
> >
> >> for_each_hpd_pin(i) {
> >> if ((hpd[i] & hotplug_trigger) == 0)
> >> continue;
> >> @@ -1658,14 +1655,17 @@ static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
> >> struct drm_i915_private *dev_priv = dev->dev_private;
> >> int pipe;
> >> u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK;
> >> - u32 dig_hotplug_reg;
> >> - u32 pin_mask, long_mask;
> >>
> >> - dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
> >> - I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
> >> + if (hotplug_trigger) {
> >> + u32 dig_hotplug_reg, pin_mask, long_mask;
> >>
> >> - pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, dig_hotplug_reg, hpd_ibx);
> >> - intel_hpd_irq_handler(dev, pin_mask, long_mask);
> >> + dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
> >> + I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
> >> +
> >> + pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
> >> + dig_hotplug_reg, hpd_ibx);
> >
> > Indentation is fubar.
> This was to avoid 80 char limit.
You have it like this
+ pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
+ dig_hotplug_reg, hpd_ibx);
and it should look like this
+ pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
+ dig_hotplug_reg, hpd_ibx);
that is the arguments on following lines should line up after the opening
'(' on the first line. Sane editors can do this automagically for you.
> >
> >> + intel_hpd_irq_handler(dev, pin_mask, long_mask);
> >> + }
> >>
> >> if (pch_iir & SDE_AUDIO_POWER_MASK) {
> >> int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK) >>
> >> @@ -1757,14 +1757,16 @@ static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
> >> struct drm_i915_private *dev_priv = dev->dev_private;
> >> int pipe;
> >> u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT;
> >> - u32 dig_hotplug_reg;
> >> - u32 pin_mask, long_mask;
> >>
> >> - dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
> >> - I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
> >> + if (hotplug_trigger) {
> >> + u32 dig_hotplug_reg, pin_mask, long_mask;
> >>
> >> - pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, dig_hotplug_reg, hpd_cpt);
> >> - intel_hpd_irq_handler(dev, pin_mask, long_mask);
> >> + dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
> >> + I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
> >> + pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
> >> + dig_hotplug_reg, hpd_cpt);
> >
> > Ditto
> >
> This was to avoid 80 char limit.
>
> > With those fixed this is
> > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> >> + intel_hpd_irq_handler(dev, pin_mask, long_mask);
> >> + }
> >>
> >> if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) {
> >> int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
> >> --
> >> 1.7.10.4
> >>
> >> _______________________________________________
> >> Intel-gfx mailing list
> >> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
