Perform a full readout of the state by making sure the mode is set
up correctly atomically.
Also there was a small memory leak by doing the memset, fix this
by calling __drm_atomic_helper_crtc_destroy_state first.
Changes since v1:
- Moved after reworking primary plane and updating mode members.
- Force a modeset calculation by changing mode->type from what the
final mode will be.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 35 ++++++++++++++++-------------------
drivers/gpu/drm/i915/intel_fbdev.c | 9 ++-------
2 files changed, 18 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index ee543e1515f1..dc4bdb91ad4d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -15191,6 +15191,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc_state *pipe_config = to_intel_crtc_state(crtc->base.state);
struct intel_encoder *encoder;
u32 reg;
bool enable;
@@ -15202,6 +15203,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
/* restore vblank interrupts to correct state */
drm_crtc_vblank_reset(&crtc->base);
if (crtc->active) {
+ drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
update_scanline_offset(crtc);
drm_crtc_vblank_on(&crtc->base);
}
@@ -15254,9 +15256,8 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
crtc->base.state->enable ? "enabled" : "disabled",
crtc->active ? "enabled" : "disabled");
- crtc->base.state->enable = crtc->active;
- crtc->base.state->active = crtc->active;
- crtc->base.enabled = crtc->active;
+ crtc->base.enabled = crtc->base.state->active = crtc->active;
+ WARN_ON(drm_atomic_set_mode_for_crtc(&pipe_config->base, NULL) < 0);
/* Because we only establish the connector -> encoder ->
* crtc links if something is active, this means the
@@ -15412,6 +15413,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
int i;
for_each_intel_crtc(dev, crtc) {
+ __drm_atomic_helper_crtc_destroy_state(&crtc->base, crtc->base.state);
memset(crtc->config, 0, sizeof(*crtc->config));
crtc->config->base.crtc = &crtc->base;
@@ -15420,11 +15422,21 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
crtc->active = dev_priv->display.get_pipe_config(crtc,
crtc->config);
- crtc->base.state->enable = crtc->active;
crtc->base.state->active = crtc->active;
crtc->base.enabled = crtc->active;
crtc->base.hwmode = crtc->config->base.adjusted_mode;
+ if (crtc->base.enabled) {
+ memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
+ intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
+ WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode) < 0);
+
+ /* make sure a initial modeset happens by making sure
+ * mode->type will be different from the final mode
+ */
+ crtc->base.state->mode.type = 0;
+ }
+
readout_plane_state(crtc, to_intel_crtc_state(crtc->base.state));
DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
@@ -15501,21 +15513,6 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
intel_modeset_readout_hw_state(dev);
- /*
- * Now that we have the config, copy it to each CRTC struct
- * Note that this could go away if we move to using crtc_config
- * checking everywhere.
- */
- for_each_intel_crtc(dev, crtc) {
- if (crtc->active && i915.fastboot) {
- intel_mode_from_pipe_config(&crtc->base.mode,
- crtc->config);
- DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
- crtc->base.base.id);
- drm_mode_debug_printmodeline(&crtc->base.mode);
- }
- }
-
/* HW state is read out, now we need to sanitize this mess. */
for_each_intel_encoder(dev, encoder) {
intel_sanitize_encoder(encoder);
diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index 3d5bb56477ab..52d20cea182c 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -486,16 +486,11 @@ retry:
* config, not the input mode, which is what crtc->mode
* usually contains. But since our current fastboot
* code puts a mode derived from the post-pfit timings
- * into crtc->mode this works out correctly. We don't
- * use hwmode anywhere right now, so use it for this
- * since the fb helper layer wants a pointer to
- * something we own.
+ * into crtc->mode this works out correctly.
*/
DRM_DEBUG_KMS("looking for current mode on connector %s\n",
connector->name);
- intel_mode_from_pipe_config(&encoder->crtc->hwmode,
- to_intel_crtc(encoder->crtc)->config);
- modes[i] = &encoder->crtc->hwmode;
+ modes[i] = &encoder->crtc->mode;
}
crtcs[i] = new_crtc;
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
