From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
CHV/BXT DPLL can't generate frequencies in the 216-240 MHz range.
Account for that when checking whether the HDMI port clock is valid.
This is particularly important for BXT since it can otherwise do
12bpc, and standard 1920x1080p60 CEA modes land right in the middle
of that range when the clock gets multiplied to account for 12bpc.
With the extra checks we will now filter out any mode where both
8bpc and 12bpc clock are within the gap. During modeset we then
pick whichever mode works, favoring 12bpc if both are possible.
12bpc isn't supported on CHV so we simply end up filtering out any
mode where the 8bpc port clock is in the gap.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_hdmi.c | 52 ++++++++++++++++++++++++++++-----------
1 file changed, 38 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 69244ed..e73d648 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1151,7 +1151,7 @@ static void pch_post_disable_hdmi(struct intel_encoder *encoder)
intel_disable_hdmi(encoder);
}
-static int hdmi_portclock_limit(struct intel_hdmi *hdmi, bool respect_dvi_limit)
+static int hdmi_port_clock_limit(struct intel_hdmi *hdmi, bool respect_dvi_limit)
{
struct drm_device *dev = intel_hdmi_to_dev(hdmi);
@@ -1164,24 +1164,48 @@ static int hdmi_portclock_limit(struct intel_hdmi *hdmi, bool respect_dvi_limit)
}
static enum drm_mode_status
+hdmi_port_clock_valid(struct intel_hdmi *hdmi,
+ int clock, bool respect_dvi_limit)
+{
+ struct drm_device *dev = intel_hdmi_to_dev(hdmi);
+
+ if (clock < 25000)
+ return MODE_CLOCK_LOW;
+ if (clock > hdmi_port_clock_limit(hdmi, respect_dvi_limit))
+ return MODE_CLOCK_HIGH;
+
+ /* CHV/BXT DPLL can't generate 216-240 MHz */
+ if ((IS_CHERRYVIEW(dev) || IS_BROXTON(dev)) &&
+ clock > 216000 && clock < 240000)
+ return MODE_CLOCK_RANGE;
+
+ return MODE_OK;
+}
+
+static enum drm_mode_status
intel_hdmi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
- int clock = mode->clock;
+ struct intel_hdmi *hdmi = intel_attached_hdmi(connector);
+ struct drm_device *dev = intel_hdmi_to_dev(hdmi);
+ enum drm_mode_status status;
+ int clock;
+
+ if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+ return MODE_NO_DBLESCAN;
+ clock = mode->clock;
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
clock *= 2;
- if (clock > hdmi_portclock_limit(intel_attached_hdmi(connector),
- true))
- return MODE_CLOCK_HIGH;
- if (clock < 25000)
- return MODE_CLOCK_LOW;
+ /* check if we can do 8bpc */
+ status = hdmi_port_clock_valid(hdmi, clock, true);
- if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
- return MODE_NO_DBLESCAN;
+ /* if we can't do 8bpc we may still be able to do 12bpc */
+ if (!HAS_GMCH_DISPLAY(dev) && status != MODE_OK)
+ status = hdmi_port_clock_valid(hdmi, clock * 3 / 2, true);
- return MODE_OK;
+ return status;
}
static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state)
@@ -1223,7 +1247,6 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
struct drm_device *dev = encoder->base.dev;
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
int clock_12bpc = pipe_config->base.adjusted_mode.crtc_clock * 3 / 2;
- int portclock_limit = hdmi_portclock_limit(intel_hdmi, false);
int desired_bpp;
pipe_config->has_hdmi_sink = intel_hdmi->has_hdmi_sink;
@@ -1261,7 +1284,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
* within limits.
*/
if (pipe_config->pipe_bpp > 8*3 && pipe_config->has_hdmi_sink &&
- clock_12bpc <= portclock_limit &&
+ hdmi_port_clock_valid(intel_hdmi, clock_12bpc, false) == MODE_OK &&
hdmi_12bpc_possible(pipe_config) &&
0 /* FIXME 12bpc support totally broken */) {
DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
@@ -1279,8 +1302,9 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
pipe_config->pipe_bpp = desired_bpp;
}
- if (adjusted_mode->crtc_clock > portclock_limit) {
- DRM_DEBUG_KMS("too high HDMI clock, rejecting mode\n");
+ if (hdmi_port_clock_valid(intel_hdmi, adjusted_mode->crtc_clock,
+ false) != MODE_OK) {
+ DRM_DEBUG_KMS("unsupported HDMI clock, rejecting mode\n");
return false;
}
--
2.3.6
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
