Re: [PATCH 4/5] drm/i915/vlv: factor out vlv_calc_port_clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On ma, 2015-06-22 at 16:33 +0300, Ville Syrjälä wrote:
> On Thu, Jun 18, 2015 at 05:25:56PM +0300, Imre Deak wrote:
> > This functionality will be needed by the next patch adding HW readout
> > support for DDI ports on BXT, so factor it out.
> > 
> > No functional change.
> > 
> > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/intel_display.c | 18 ++++++++++--------
> >  drivers/gpu/drm/i915/intel_drv.h     |  2 ++
> >  2 files changed, 12 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 0e5c613..6cf2a15 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -7993,6 +7993,14 @@ static void i9xx_get_pfit_config(struct intel_crtc *crtc,
> >  			I915_READ(LVDS) & LVDS_BORDER_ENABLE;
> >  }
> >  
> > +int vlv_calc_port_clock(int refclk, intel_clock_t *pll_clock)
> 
> It doesn't work for VLV, so the name is misleading.

Oops, completely missed that. It would also break on VLV after this
change, since I do use it also for VLV.

> > +{
> > +	chv_clock(refclk, pll_clock);
> > +
> > +	/* clock.dot is the fast clock */
> > +	return pll_clock->dot / 5;
> > +}
> 
> Maybe just make chv_clock() return the divided down clock directtly
> instead of adding this extra wrapper.
> 
> Though in that case I'd prefer if you change all the vlv_clock(),
> i9xx_clock()... functions to do the same, just to keep the code
> as similar as possible between platforms.

Ok, will look into this.

> > +
> >  static void vlv_crtc_clock_get(struct intel_crtc *crtc,
> >  			       struct intel_crtc_state *pipe_config)
> >  {
> > @@ -8017,10 +8025,7 @@ static void vlv_crtc_clock_get(struct intel_crtc *crtc,
> >  	clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
> >  	clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
> >  
> > -	vlv_clock(refclk, &clock);
> > -
> > -	/* clock.dot is the fast clock */
> > -	pipe_config->port_clock = clock.dot / 5;
> > +	pipe_config->port_clock = vlv_calc_port_clock(refclk, &clock);
> >  }
> >  
> >  static void
> > @@ -8116,10 +8121,7 @@ static void chv_crtc_clock_get(struct intel_crtc *crtc,
> >  	clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
> >  	clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
> >  
> > -	chv_clock(refclk, &clock);
> > -
> > -	/* clock.dot is the fast clock */
> > -	pipe_config->port_clock = clock.dot / 5;
> > +	pipe_config->port_clock = vlv_calc_port_clock(refclk, &clock);
> >  }
> >  
> >  static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index bcafefc..95e14bb 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1139,6 +1139,8 @@ ironlake_check_encoder_dotclock(const struct intel_crtc_state *pipe_config,
> >  				int dotclock);
> >  bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, int target_clock,
> >  			intel_clock_t *best_clock);
> > +int vlv_calc_port_clock(int refclk, intel_clock_t *pll_clock);
> > +
> >  bool intel_crtc_active(struct drm_crtc *crtc);
> >  void hsw_enable_ips(struct intel_crtc *crtc);
> >  void hsw_disable_ips(struct intel_crtc *crtc);
> > -- 
> > 2.1.4
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 


_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux