[PATCH v2 03/27] drm/i915: clean up intel_sanitize_crtc, v2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Instead of breaking all connections manually, kill them with
atomic modeset, if it happens. Now that the everything's atomic
some code becomes obsolete.

Forcing a atomic modeset with null mode and all connectors gone
updates the state too, in a cleaner way.

Because load detection is atomic too there can be no mismatch between
crtc->active and crtc->state->active

Changes since v1:
- Reword commit message.
- Set null mode and break all connectors when force disabling crtc.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/i915_debugfs.c  |   8 +--
 drivers/gpu/drm/i915/intel_display.c | 108 ++++++++++++++++-------------------
 drivers/gpu/drm/i915/intel_drv.h     |   2 +-
 3 files changed, 53 insertions(+), 65 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 51fe0fbcd00c..db23916c1875 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3637,7 +3637,7 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 		bool active = pipe_config->base.active;
 
 		if (active) {
-			intel_crtc_control(&crtc->base, false);
+			intel_crtc_control(&crtc->base, false, false);
 			pipe_config = to_intel_crtc_state(crtc->base.state);
 		}
 
@@ -3647,7 +3647,7 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
 
 		if (active)
-			intel_crtc_control(&crtc->base, true);
+			intel_crtc_control(&crtc->base, true, false);
 	}
 	drm_modeset_unlock_all(dev);
 }
@@ -3671,7 +3671,7 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 		bool active = pipe_config->base.active;
 
 		if (active) {
-			intel_crtc_control(&crtc->base, false);
+			intel_crtc_control(&crtc->base, false, false);
 			pipe_config = to_intel_crtc_state(crtc->base.state);
 		}
 
@@ -3681,7 +3681,7 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
 
 		if (active)
-			intel_crtc_control(&crtc->base, true);
+			intel_crtc_control(&crtc->base, true, false);
 	}
 	drm_modeset_unlock_all(dev);
 }
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0f031658a297..1936a28a57c1 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6192,7 +6192,7 @@ free:
 }
 
 /* Master function to enable/disable CRTC and corresponding power wells */
-int intel_crtc_control(struct drm_crtc *crtc, bool enable)
+int intel_crtc_control(struct drm_crtc *crtc, bool active, bool force)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_mode_config *config = &dev->mode_config;
@@ -6202,10 +6202,13 @@ int intel_crtc_control(struct drm_crtc *crtc, bool enable)
 	struct drm_atomic_state *state;
 	int ret;
 
-	if (enable == intel_crtc->active)
+	if (WARN_ON(active && force))
+		return -EINVAL;
+
+	if (active == intel_crtc->active)
 		return 0;
 
-	if (enable && !crtc->state->enable)
+	if (active && !crtc->state->enable)
 		return 0;
 
 	/* this function should be called with drm_modeset_lock_all for now */
@@ -6225,7 +6228,30 @@ int intel_crtc_control(struct drm_crtc *crtc, bool enable)
 		ret = PTR_ERR(pipe_config);
 		goto err;
 	}
-	pipe_config->base.active = enable;
+	pipe_config->base.active = active;
+	if (force) {
+		struct drm_connector *connector;
+
+		ret = drm_atomic_set_mode_for_crtc(&pipe_config->base, NULL);
+		if (ret)
+			goto err;
+
+		list_for_each_entry(connector, &config->connector_list, head) {
+			struct drm_connector_state *conn_state;
+
+			if (connector->state->crtc != crtc)
+				continue;
+
+			conn_state = drm_atomic_get_connector_state(state, connector);
+			if (IS_ERR(conn_state)) {
+				ret = PTR_ERR(conn_state);
+				goto err;
+			}
+			ret = drm_atomic_set_crtc_for_connector(conn_state, NULL);
+			if (ret)
+				goto err;
+		}
+	}
 
 	ret = intel_set_mode(state);
 	if (!ret)
@@ -6249,7 +6275,7 @@ void intel_crtc_update_dpms(struct drm_crtc *crtc)
 	for_each_encoder_on_crtc(dev, crtc, intel_encoder)
 		enable |= intel_encoder->connectors_active;
 
-	intel_crtc_control(crtc, enable);
+	intel_crtc_control(crtc, enable, false);
 }
 
 void intel_encoder_destroy(struct drm_encoder *encoder)
@@ -14812,11 +14838,14 @@ intel_check_plane_mapping(struct intel_crtc *crtc)
 	return true;
 }
 
-static void intel_sanitize_crtc(struct intel_crtc *crtc)
+static void intel_sanitize_crtc(struct intel_crtc *crtc,
+				struct intel_crtc_state *pipe_config)
 {
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_encoder *intel_encoder;
 	u32 reg;
+	bool enable;
 
 	/* Clear any frame start delays used for debugging left by the BIOS */
 	reg = PIPECONF(crtc->config->cpu_transcoder);
@@ -14833,7 +14862,6 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 	 * disable the crtc (and hence change the state) if it is wrong. Note
 	 * that gen4+ has a fixed plane -> pipe mapping.  */
 	if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
-		struct intel_connector *connector;
 		bool plane;
 
 		DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
@@ -14846,33 +14874,12 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 		to_intel_plane_state(crtc->base.primary->state)->visible = true;
 		crtc->base.primary->crtc = &crtc->base;
 		crtc->plane = !plane;
-		intel_crtc_control(&crtc->base, false);
+		intel_crtc_control(&crtc->base, false, true);
 		crtc->plane = plane;
-
-		/* ... and break all links. */
-		for_each_intel_connector(dev, connector) {
-			if (connector->encoder->base.crtc != &crtc->base)
-				continue;
-
-			connector->base.dpms = DRM_MODE_DPMS_OFF;
-			connector->base.encoder = NULL;
-		}
-		/* multiple connectors may have the same encoder:
-		 *  handle them and break crtc link separately */
-		for_each_intel_connector(dev, connector)
-			if (connector->encoder->base.crtc == &crtc->base) {
-				connector->encoder->base.crtc = NULL;
-				connector->encoder->connectors_active = false;
-			}
-
-		WARN_ON(crtc->active);
-		crtc->base.state->enable = false;
-		crtc->base.state->active = false;
-		crtc->base.enabled = false;
 	}
 
 	if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
-	    crtc->pipe == PIPE_A && !crtc->active) {
+	    crtc->pipe == PIPE_A && (!pipe_config || !pipe_config->base.active)) {
 		/* BIOS forgot to enable pipe A, this mostly happens after
 		 * resume. Force-enable the pipe to fix this, the update_dpms
 		 * call below we restore the pipe to the right state, but leave
@@ -14881,36 +14888,16 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 	}
 
 	/* Adjust the state of the output pipe according to whether we
-	 * have active connectors/encoders. */
-	intel_crtc_update_dpms(&crtc->base);
-
-	if (crtc->active != crtc->base.state->active) {
-		struct intel_encoder *encoder;
+	 * have active connectors/encoders */
+	enable = false;
+	for_each_encoder_on_crtc(dev, &crtc->base, intel_encoder)
+		enable |= intel_encoder->connectors_active;
 
-		/* This can happen either due to bugs in the get_hw_state
-		 * functions or because the pipe is force-enabled due to the
-		 * pipe A quirk. */
-		DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
-			      crtc->base.base.id,
-			      crtc->base.state->enable ? "enabled" : "disabled",
-			      crtc->active ? "enabled" : "disabled");
-
-		crtc->base.state->enable = crtc->active;
-		crtc->base.state->active = crtc->active;
-		crtc->base.enabled = crtc->active;
-
-		/* Because we only establish the connector -> encoder ->
-		 * crtc links if something is active, this means the
-		 * crtc is now deactivated. Break the links. connector
-		 * -> encoder links are only establish when things are
-		 *  actually up, hence no need to break them. */
-		WARN_ON(crtc->active);
-
-		for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
-			WARN_ON(encoder->connectors_active);
-			encoder->base.crtc = NULL;
-		}
-	}
+	/* only turn off separately if configuration's not restored,
+	 * if it's restored it will change mode or turn off anyway.
+	 */
+	if (!enable && crtc->base.state->active && !pipe_config)
+		intel_crtc_control(&crtc->base, false, true);
 
 	if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
 		/*
@@ -15278,7 +15265,8 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 				      &crtc->state->adjusted_mode);
 		}
 
-		intel_sanitize_crtc(intel_crtc);
+		intel_sanitize_crtc(intel_crtc, !force_restore ? NULL :
+				    to_intel_crtc_state(crtc_state));
 
 		/*
 		 * sanitize_crtc may have forced an update of crtc->state,
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 807e001e4cee..ec721e31eae8 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -993,7 +993,7 @@ void intel_mark_busy(struct drm_device *dev);
 void intel_mark_idle(struct drm_device *dev);
 void intel_crtc_restore_mode(struct drm_crtc *crtc);
 int intel_display_suspend(struct drm_device *dev);
-int intel_crtc_control(struct drm_crtc *crtc, bool enable);
+int intel_crtc_control(struct drm_crtc *crtc, bool active, bool force);
 void intel_crtc_update_dpms(struct drm_crtc *crtc);
 void intel_encoder_destroy(struct drm_encoder *encoder);
 int intel_connector_init(struct intel_connector *);
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux