On Mon, May 18, 2015 at 06:04:36AM +0000, Popov, Pavel E wrote: > Hi All, > > I observed that some tests from HANG section described in Makefile.in > change their behavior when command parser is enabled: > > Tests gem_bad_address starts to fail with error: > "CMD: Rejected command 0x10600002 for bitmask 0x00400000..." > As said Chris this test and gem_bad_blit are out of date. > > Test gem_hang starts to fail with error: > "CMD: Rejected master-only command: 0x09000000" > This is because MI_WAIT_FOR_EVENT marked as master. > > Test gem_non_secure_batch starts to fail with error: > "CMD: Rejected register 0x0000203c in command..." > This looks like an expected behavior for this test which can be handled. > > All "HANG" tests pass on my HSW configuration without command parser. > But looks like most of them were initially written to fail or hang. > Am I right that behavior for these tests is unclear at the moment? > Do you plan to update/fix tests from this section? They are not really tests, but examples of how you can hang the machine on particular hardware. There is no expected behaviour for them. -Chris -- Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
