Summary
We covered the platforms: Skylake, Braswell, Broadwell, Haswell, Baytrail and IvyBridge. In this circle, 7 new bugs have been found in manual testing
and 7 new bugs have been found in nightly testing.
90431 -
[SKL] Call Trace appears since boot system
90443 -
[SKL] black screen after resume from S3
90449 -
[SKL Regression] XV fail with 3pipe
90468 -
[IVB regression] Both DVI/DP monitors are black after X rotation + S3
90410 -[BDW-H
bisected]System boot up causes [drm:check_crtc_state [i915]] *ERROR* mismatch in ddi_pll_sel
90460 -
[BDW regression]Dpy_misc_s3d fails
90396 -
[HSW/BSW] 3 monitors are all black screen after xinit + S3
Test Environment
Kernel version: drm-intel-testing-2015-05-08 commit 2ac7c6c9737e79324bce9ec35e4e4e36ce57fde1
Quality Status
| Platform | Status |
| SKL | 3 new bugs found in SKL-Y desktop.
90431 - [SKL] Call Trace appears since boot system
90443 - [SKL] black screen after resume from S3
90449 - [SKL Regression] XV fail with 3pipe
90239 - [SKL desktop] DP hotplug cause " CPU pipe A FIFO underrun" ERROR
90238 - [SKL desktop] HDMI "testdisplay -y" shows wrong picture on every interlaced scanning resolution
90237 - [SKL desktop] "testdisplay -a" causes Call Trace
89792 - [BYT/BSW/SKL Debugfs] cat /sys/kernel/debug/dri/0/i915_sr_status showing self-refresh: disabled
89596 - [SKL]System output "ERROR" when it resumes from S4 connecting DP monitor
89594 - [SKL] DP monitor can't be lighted up with raw X on 4k resolution after hoplug
89055 [SKL mobile]"testdisplay –a "case causes Call Trace "at drivers/gpu/drm/i915/intel_pm.c"
|
| BSW | Upgrade BIOS to V69 that has no issues in V68.
90396 - [HSW/BSW] 3 monitors are all black screen after xinit + S3
90228 - [BSW] hotplug events floods
86684 - [BYT/BSW] igt/kms_psr_sink_crc subcases fail after PSR is enabled in kernel
89832 - [BSW] "testdisplay -a" shows black for some modes on ASUS PA238Q
89792 - [BYT/BSW/SKL Debugfs] cat /sys/kernel/debug/dri/0/i915_sr_status showing self-refresh: disabled
89606 [BSW] DVI screen is black on some modes when running testdisplay
89605 [BSW] testdisplay on 3 pipe does not show in one monitor
89601 [BSW] Sometimes dmesg shows " *ERROR* EDID checksum is invalid" when connected with HDMI monitor
89600 [BSW] GPU hangs after S3 + S4
89585 - [BSW]HDMI resolution-2560x1440@60Hz can't be lighted up with non-reduced blanking
89461 - [BSW] replug HDMI/DP cable does not light up screen sometimes
88963 [BSW] DP screen is black when running testdisplay on some modes
Fixed bugs:
90227 - [BSW bisected] *ERROR* mismatch in has_infoframe (expected 1, found 0) when booting with HDMI monitor connected
90059 - [BYT/BSW bisected]Start up the machine with HDMI screen causes WARNING
89668 [BSW] HDMI screen becomes black after replug HDMI cable : BIOS upgrade to V69 fixes this bug.
|
| BDW | 90410 -[BDW-H
bisected]System boot up causes [drm:check_crtc_state [i915]] *ERROR* mismatch in ddi_pll_sel
90460 - [BDW regression]Dpy_misc_s3d
fails
90212 - [BDW-Y bisected] Screen flicker when start X with FBC enable
89439 - [BDW] xterm disappears on HDMI screen if rotate from left to right after S3
82551 - [HSW/BDW/SKL mobile] HDMI hot plug sporadically cause ERROR
Bug 74102 - [ILK/SNB/IVB/HSW/BDW]igt/testdisplay causes *ERROR* Pipe A FIFO underrun
|
| BYT | 89792 - [BYT/BSW/SKL Debugfs] cat
/sys/kernel/debug/dri/0/i915_sr_status showing self-refresh: disabled
89401 - [BYT] Some testdisplay case cause screen flicker
Fixed bug:
90225 - [BYT] Testdisplay cause abnormal output in dmesg when HDMI monitor is connected.
|
| HSW | 90396 -
[HSW/BSW] 3 monitors are all black screen after xinit + S3
90253 - [SNB]System fails to suspend from second time
90046 - [HSW ] test S3 with 3pipe cause *ERROR*
82551 - [HSW/BDW/SKL mobile] HDMI hot plug sporadically cause ERROR
Bug 74102 - [ILK/SNB/IVB/HSW/BDW]igt/testdisplay causes *ERROR* Pipe A FIFO underrun
Fixed bugs:
90059 - [BYT/BSW bisected]Start up the machine with HDMI screen causes WARNING
90236 - [HSW mobile Bisected] Screen is blank while run "mplayer -vo vaapi -va vaapi "
|
| IVB | 90468 -
[IVB regression] Both DVI/DP monitors are black after X rotation + S3
|
New bugs found in nightly testing:
| 90462 | [SKL Regression]many kms_flip and kms_cursor_crc subcases cause [drm:check_crtc_state [i915]] *ERROR* mismatch in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000001) |
| 90413 | [all]igt/gem_mmap_gtt/medium-copy takes more than 10 minutes |
| 90412 | [HSW]igt/gem_mmap_gtt/big-copy fails |
| 90400 | [BDW]igt/gem_ppgtt/flink-and-close-vma-leak fails |
| 90398 | [BDW Regression]ARNING: CPU: 0 PID: 1215 at drivers/gpu/drm/drm_irq.c:1159 drm_wait_one_vblank+0x3b/0x16d [drm] while clean boot system |
| 90394 | [SNB Regression]igt/kms_plane/plane-position-hole-dpms-pipe-a-plane-1 fails |
| 90393 | [SNB]igt/gem_read_read_speed/read-read-512x512 crash |
Bests
Jeff
> -----Original Message-----
> From: Daniel Vetter [mailto:daniel.vetter@xxxxxxxx]
> Sent: Friday, May 08, 2015 11:42 PM
> To: Sun, Yi; Zheng, Jeff
> Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; Daniel Vetter; Jani Nikula
> Subject: Updated drm-intel-testing
>
> Hi all,
>
> New -testing cycle with cool stuff:
> - skl plane scaler support (Chandra Kondru)
> - enable hsw cmd parser (Daniel and fix from Rebecca Palmer)
> - skl dc5/6 support (low power display modes) from Suketu&Sunil
> - dp compliance testing patches (Todd Previte)
> - dp link training optimization (Mika Kahola)
> - fixes to make skl resume work (Damien)
> - rework modeset code to fully use atomic state objects (Ander&Maarten)
> - pile of bxt w/a patchs from Nick Hoath
> - (linear) partial gtt mmap support (Joonas Lahtinen)
>
> Happy testing!
>
> Cheers, Daniel
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
_______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
