[PATCH 17/42] drm/i915: Remove use of crtc->config from intel_pm.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_pm.c | 96 ++++++++++++++++++++---------------------
 1 file changed, 46 insertions(+), 50 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index a70b2d1fc844..869b587f463d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -678,7 +678,7 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 		int pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
 		int clock;
 
-		adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
+		adjusted_mode = &crtc->state->adjusted_mode;
 		clock = adjusted_mode->crtc_clock;
 
 		/* Display SR */
@@ -747,10 +747,10 @@ static bool g4x_compute_wm0(struct drm_device *dev,
 		return false;
 	}
 
-	adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
+	adjusted_mode = &crtc->state->adjusted_mode;
 	clock = adjusted_mode->crtc_clock;
 	htotal = adjusted_mode->crtc_htotal;
-	hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
+	hdisplay = to_intel_crtc_state(crtc->state)->pipe_src_w;
 	pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
 
 	/* Use the small buffer method to calculate plane watermark */
@@ -834,10 +834,10 @@ static bool g4x_compute_srwm(struct drm_device *dev,
 	}
 
 	crtc = intel_get_crtc_for_plane(dev, plane);
-	adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
+	adjusted_mode = &crtc->state->adjusted_mode;
 	clock = adjusted_mode->crtc_clock;
 	htotal = adjusted_mode->crtc_htotal;
-	hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
+	hdisplay = to_intel_crtc_state(crtc->state)->pipe_src_w;
 	pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
 
 	line_time_us = max(htotal * 1000 / clock, 1);
@@ -934,16 +934,11 @@ static uint8_t vlv_compute_drain_latency(struct drm_crtc *crtc,
 					 struct drm_plane *plane)
 {
 	struct drm_device *dev = crtc->dev;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int entries, prec_mult, drain_latency, pixel_size;
-	int clock = intel_crtc->config->base.adjusted_mode.crtc_clock;
+	int clock = crtc->state->adjusted_mode.crtc_clock;
 	const int high_precision = IS_CHERRYVIEW(dev) ? 16 : 64;
 
-	/*
-	 * FIXME the plane might have an fb
-	 * but be invisible (eg. due to clipping)
-	 */
-	if (!intel_crtc->active || !plane->state->fb)
+	if (!crtc->state->active || !to_intel_plane_state(plane->state)->visible)
 		return 0;
 
 	if (WARN(clock == 0, "Pixel clock is zero!\n"))
@@ -981,11 +976,11 @@ static int vlv_compute_wm(struct intel_crtc *crtc,
 	 * FIXME the plane might have an fb
 	 * but be invisible (eg. due to clipping)
 	 */
-	if (!crtc->active || !plane->base.state->fb)
+	if (!crtc->base.state->active || !plane->base.state->fb)
 		return 0;
 
 	pixel_size = drm_format_plane_cpp(plane->base.state->fb->pixel_format, 0);
-	clock = crtc->config->base.adjusted_mode.crtc_clock;
+	clock = crtc->base.state->adjusted_mode.crtc_clock;
 
 	entries = DIV_ROUND_UP(clock, 1000) * pixel_size;
 
@@ -1217,10 +1212,10 @@ static void i965_update_wm(struct drm_crtc *unused_crtc)
 		/* self-refresh has much higher latency */
 		static const int sr_latency_ns = 12000;
 		const struct drm_display_mode *adjusted_mode =
-			&to_intel_crtc(crtc)->config->base.adjusted_mode;
+			&crtc->state->adjusted_mode;
 		int clock = adjusted_mode->crtc_clock;
 		int htotal = adjusted_mode->crtc_htotal;
-		int hdisplay = to_intel_crtc(crtc)->config->pipe_src_w;
+		int hdisplay = to_intel_crtc_state(crtc->state)->pipe_src_w;
 		int pixel_size = crtc->primary->state->fb->bits_per_pixel / 8;
 		unsigned long line_time_us;
 		int entries;
@@ -1304,7 +1299,7 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 		if (IS_GEN2(dev))
 			cpp = 4;
 
-		adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
+		adjusted_mode = &crtc->state->adjusted_mode;
 		planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
 					       wm_info, fifo_size, cpp,
 					       pessimal_latency_ns);
@@ -1326,7 +1321,7 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 		if (IS_GEN2(dev))
 			cpp = 4;
 
-		adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
+		adjusted_mode = &crtc->state->adjusted_mode;
 		planeb_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
 					       wm_info, fifo_size, cpp,
 					       pessimal_latency_ns);
@@ -1365,10 +1360,10 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 		/* self-refresh has much higher latency */
 		static const int sr_latency_ns = 6000;
 		const struct drm_display_mode *adjusted_mode =
-			&to_intel_crtc(enabled)->config->base.adjusted_mode;
+			&enabled->state->adjusted_mode;
 		int clock = adjusted_mode->crtc_clock;
 		int htotal = adjusted_mode->crtc_htotal;
-		int hdisplay = to_intel_crtc(enabled)->config->pipe_src_w;
+		int hdisplay = to_intel_crtc_state(enabled->state)->pipe_src_w;
 		int pixel_size = enabled->primary->state->fb->bits_per_pixel / 8;
 		unsigned long line_time_us;
 		int entries;
@@ -1421,7 +1416,7 @@ static void i845_update_wm(struct drm_crtc *unused_crtc)
 	if (crtc == NULL)
 		return;
 
-	adjusted_mode = &to_intel_crtc(crtc)->config->base.adjusted_mode;
+	adjusted_mode = &crtc->state->adjusted_mode;
 	planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
 				       &i845_wm_info,
 				       dev_priv->display.get_fifo_size(dev, 0),
@@ -1437,20 +1432,20 @@ static void i845_update_wm(struct drm_crtc *unused_crtc)
 static uint32_t ilk_pipe_pixel_rate(struct drm_device *dev,
 				    struct drm_crtc *crtc)
 {
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	uint32_t pixel_rate;
-
-	pixel_rate = intel_crtc->config->base.adjusted_mode.crtc_clock;
+	uint32_t pixel_rate =
+		crtc->state->adjusted_mode.crtc_clock;
+	struct intel_crtc_state *pipe_config =
+		to_intel_crtc_state(crtc->state);
 
 	/* We only use IF-ID interlacing. If we ever use PF-ID we'll need to
 	 * adjust the pixel_rate here. */
 
-	if (intel_crtc->config->pch_pfit.enabled) {
+	if (pipe_config->pch_pfit.enabled) {
 		uint64_t pipe_w, pipe_h, pfit_w, pfit_h;
-		uint32_t pfit_size = intel_crtc->config->pch_pfit.size;
+		uint32_t pfit_size = pipe_config->pch_pfit.size;
 
-		pipe_w = intel_crtc->config->pipe_src_w;
-		pipe_h = intel_crtc->config->pipe_src_h;
+		pipe_w = pipe_config->pipe_src_w;
+		pipe_h = pipe_config->pipe_src_h;
 		pfit_w = (pfit_size >> 16) & 0xFFFF;
 		pfit_h = pfit_size & 0xFFFF;
 		if (pipe_w < pfit_w)
@@ -1802,11 +1797,10 @@ static uint32_t
 hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct drm_display_mode *mode = &intel_crtc->config->base.adjusted_mode;
+	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
 	u32 linetime, ips_linetime;
 
-	if (!intel_crtc->active)
+	if (!crtc->state->active)
 		return 0;
 
 	/* The WM are computed with base on how long it takes to fill a single
@@ -2061,11 +2055,11 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
 	enum pipe pipe = intel_crtc->pipe;
 	struct drm_plane *plane;
 
-	if (!intel_crtc->active)
+	if (!crtc->state->active)
 		return;
 
 	p->active = true;
-	p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
+	p->pipe_htotal = crtc->state->adjusted_mode.crtc_htotal;
 	p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc);
 
 	if (crtc->primary->state->fb) {
@@ -2084,8 +2078,8 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
 		p->cur.enabled = false;
 		p->cur.bytes_per_pixel = 0;
 	}
-	p->pri.horiz_pixels = intel_crtc->config->pipe_src_w;
-	p->cur.horiz_pixels = intel_crtc->base.cursor->state->crtc_w;
+	p->pri.horiz_pixels = to_intel_crtc_state(crtc->state)->pipe_src_w;
+	p->cur.horiz_pixels = crtc->cursor->state->crtc_w;
 
 	drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
 		struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -2589,7 +2583,7 @@ skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
 
 	nth_active_pipe = 0;
 	for_each_crtc(dev, crtc) {
-		if (!to_intel_crtc(crtc)->active)
+		if (!crtc->state->active)
 			continue;
 
 		if (crtc == for_crtc)
@@ -2862,7 +2856,7 @@ static void skl_compute_wm_global_parameters(struct drm_device *dev,
 	struct drm_plane *plane;
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
-		config->num_pipes_active += to_intel_crtc(crtc)->active;
+		config->num_pipes_active += crtc->state->active;
 
 	/* FIXME: I don't think we need those two global parameters on SKL */
 	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
@@ -2881,12 +2875,14 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 	enum pipe pipe = intel_crtc->pipe;
 	struct drm_plane *plane;
 	struct drm_framebuffer *fb;
+	struct intel_crtc_state *pipe_config;
 	int i = 1; /* Index for sprite planes start */
 
-	p->active = intel_crtc->active;
+	pipe_config = to_intel_crtc_state(crtc->state);
+	p->active = crtc->state->active;
 	if (p->active) {
-		p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal;
-		p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config);
+		p->pipe_htotal = pipe_config->base.adjusted_mode.crtc_htotal;
+		p->pixel_rate = skl_pipe_pixel_rate(pipe_config);
 
 		fb = crtc->primary->state->fb;
 		/* For planar: Bpp is for uv plane, y_Bpp is for y plane */
@@ -2903,8 +2899,8 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 			p->plane[0].y_bytes_per_pixel = 0;
 			p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
 		}
-		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
-		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
+		p->plane[0].horiz_pixels = pipe_config->pipe_src_w;
+		p->plane[0].vert_pixels = pipe_config->pipe_src_h;
 		p->plane[0].rotation = crtc->primary->state->rotation;
 
 		fb = crtc->cursor->state->fb;
@@ -3042,7 +3038,7 @@ static void skl_compute_wm_level(const struct drm_i915_private *dev_priv,
 static uint32_t
 skl_compute_linetime_wm(struct drm_crtc *crtc, struct skl_pipe_wm_parameters *p)
 {
-	if (!to_intel_crtc(crtc)->active)
+	if (!crtc->state->active)
 		return 0;
 
 	return DIV_ROUND_UP(8 * p->pipe_htotal * 1000, p->pixel_rate);
@@ -3266,7 +3262,7 @@ static void skl_flush_wm_values(struct drm_i915_private *dev_priv,
 	 * re-allocate the freed space without this pipe fetching from it.
 	 */
 	for_each_intel_crtc(dev, crtc) {
-		if (!crtc->active)
+		if (!crtc->base.state->active)
 			continue;
 
 		pipe = crtc->pipe;
@@ -3289,7 +3285,7 @@ static void skl_flush_wm_values(struct drm_i915_private *dev_priv,
 	 * space is not used anymore.
 	 */
 	for_each_intel_crtc(dev, crtc) {
-		if (!crtc->active)
+		if (!crtc->base.state->active)
 			continue;
 
 		pipe = crtc->pipe;
@@ -3312,7 +3308,7 @@ static void skl_flush_wm_values(struct drm_i915_private *dev_priv,
 	 * will just get more DDB space with the correct WM values.
 	 */
 	for_each_intel_crtc(dev, crtc) {
-		if (!crtc->active)
+		if (!crtc->base.state->active)
 			continue;
 
 		pipe = crtc->pipe;
@@ -3378,7 +3374,7 @@ static void skl_update_other_pipe_wm(struct drm_device *dev,
 		if (this_crtc->pipe == intel_crtc->pipe)
 			continue;
 
-		if (!intel_crtc->active)
+		if (!intel_crtc->base.state->active)
 			continue;
 
 		wm_changed = skl_update_pipe_wm(&intel_crtc->base,
@@ -3603,7 +3599,7 @@ static void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc)
 		hw->plane_trans[pipe][i] = I915_READ(PLANE_WM_TRANS(pipe, i));
 	hw->cursor_trans[pipe] = I915_READ(CUR_WM_TRANS(pipe));
 
-	if (!intel_crtc->active)
+	if (!crtc->state->active)
 		return;
 
 	hw->dirty[pipe] = true;
@@ -3658,7 +3654,7 @@ static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc)
 	if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 		hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe));
 
-	active->pipe_enabled = intel_crtc->active;
+	active->pipe_enabled = crtc->state->active;
 
 	if (active->pipe_enabled) {
 		u32 tmp = hw->wm_pipe[pipe];
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux