On Thu, May 07, 2015 at 09:52:09AM +0530, Sonika Jindal wrote:
> BXT supports following intermediate link rates for edp:
> 2.16GHz, 2.43GHz, 3.24GHz, 4.32GHz.
> Adding support for programming the intermediate rates.
>
> Signed-off-by: Sonika Jindal <sonika.jindal@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 44 ++++++++++++++++++++++++++++++++++++--
> drivers/gpu/drm/i915/intel_dp.c | 7 +++++-
> 2 files changed, 48 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 9c1e74a..c0cb5f7 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1397,8 +1397,7 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
> clk_div.lanestagger = 0x04;
> else
> clk_div.lanestagger = 0x02;
> - } else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
> - intel_encoder->type == INTEL_OUTPUT_EDP) {
> + } else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
> struct drm_encoder *encoder = &intel_encoder->base;
> struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
>
> @@ -1416,8 +1415,49 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
> clk_div = bxt_dp_clk_val[0];
> DRM_ERROR("Unknown link rate\n");
> }
> + } else if (intel_encoder->type == INTEL_OUTPUT_EDP) {
> + struct drm_encoder *encoder = &intel_encoder->base;
> + struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> + int link_rate;
> +
> + /*
> + * If edp1.4 intermediate frequency support is present, we set
> + * link_bw to 0 and a valid rate index in rate_select.
> + */
> + if (intel_dp->link_bw)
> + link_rate = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
> + else
> + link_rate = intel_dp->sink_rates[intel_dp->rate_select];
The chosen clock should already be passed in, so no there should be no
need for this. I see the DP case does has the same issue.
> +
> + switch (link_rate) {
> + case 162000:
> + clk_div = bxt_dp_clk_val[0];
> + break;
> + case 216000:
> + clk_div = bxt_dp_clk_val[3];
> + break;
> + case 243000:
> + clk_div = bxt_dp_clk_val[4];
> + break;
> + case 270000:
> + clk_div = bxt_dp_clk_val[1];
> + break;
> + case 324000:
> + clk_div = bxt_dp_clk_val[5];
> + break;
> + case 432000:
> + clk_div = bxt_dp_clk_val[6];
> + break;
> + case 540000:
> + clk_div = bxt_dp_clk_val[2];
> + break;
> + default:
> + clk_div = bxt_dp_clk_val[0];
> + DRM_ERROR("Unknown link rate\n");
> + }
This looks rather fragile. I would suggest storing the link rate in
the bxt_clk_div structure and just looping through the array looking for
the correct rate. That will also work for normal DP, so less code in the
end.
> }
>
> +
Spurious whitespace.
> crtc_state->dpll_hw_state.ebb0 =
> PORT_PLL_P1(clk_div.p1) | PORT_PLL_P2(clk_div.p2);
> crtc_state->dpll_hw_state.pll0 = clk_div.m2_int;
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index c9d50d1..e6ee7c6 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -85,6 +85,8 @@ static const struct dp_link_dpll chv_dpll[] = {
> { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
> };
>
> +static const int bxt_rates[] = { 162000, 216000, 243000, 270000,
> + 324000, 432000, 540000 };
> static const int skl_rates[] = { 162000, 216000, 270000,
> 324000, 432000, 540000 };
> static const int chv_rates[] = { 162000, 202500, 210000, 216000,
> @@ -1161,7 +1163,10 @@ intel_dp_sink_rates(struct intel_dp *intel_dp, const int **sink_rates)
> static int
> intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
> {
> - if (IS_SKYLAKE(dev)) {
> + if (IS_BROXTON(dev)) {
> + *source_rates = bxt_rates;
> + return ARRAY_SIZE(bxt_rates);
> + } else if (IS_SKYLAKE(dev)) {
> *source_rates = skl_rates;
> return ARRAY_SIZE(skl_rates);
> } else if (IS_CHERRYVIEW(dev)) {
> --
> 1.7.10.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
