On Monday 04 May 2015 08:58 PM, Ville Syrjälä wrote:
On Mon, May 04, 2015 at 10:12:23AM +0200, Daniel Vetter wrote:
On Mon, May 04, 2015 at 10:58:02AM +0530, Deepak S wrote:
On Wednesday 29 April 2015 02:59 PM, Ville Syrjälä wrote:
On Wed, Apr 29, 2015 at 08:36:24AM +0530, deepak.s@xxxxxxxxxxxxxxx wrote:
From: Deepak S <deepak.s@xxxxxxxxxxxxxxx>
Based on the spec, Setting up static BIAS for GPU to improve the
rps performace.
v2: rename reg defn to match spec. (Ville)
v3: Updated bias setting for chv (Deepak)
Signed-off-by: Deepak S <deepak.s@xxxxxxxxxxxxxxx>
Matches the spec. Whether the chosen bias is really the best, I can't
really say. But favoring the GPU does seem like a sensible idea if we
want to keep the UI stuff fluid enough while there's some CPU heavy
tasks running at the same time.
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Thanks Ville for reviewing,
Yes our aim is to keep user experience smooth.
Since the aim is smooth UI ... how does this interact with the rps
boosting that was just enabled with Chris' patches for vlv/chv too?
A static bias seems a lot less what we want now that we should have
something dynamic. Specifically I'm thinking of
commit 6ad790c0f5ac55fd13f322c23519f0d6f0721864
Author: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Date: Tue Apr 7 16:20:31 2015 +0100
drm/i915: Boost GPU frequency if we detect outstanding pageflips
Totally separate topic. This only affects how the Punit splits up the
available energy credits between the CPU and the GPU. So only relevant
when thermally constrained and both CPU and GPU would like to run
faster than the limit allows.
Thanks Ville.
This is completely a different topic, more to do with punit budget constraints & this does not impact "Boot RPS logic"
Thanks
Deepak
Cheers, Daniel
---
drivers/gpu/drm/i915/i915_reg.h | 6 ++++++
drivers/gpu/drm/i915/intel_pm.c | 12 ++++++++++++
2 files changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 36805b6..048987e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -670,6 +670,12 @@ enum skl_disp_power_wells {
#define FB_FMAX_VMIN_FREQ_LO_SHIFT 27
#define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000
+#define VLV_TURBO_SOC_OVERRIDE 0x04
+#define VLV_OVERRIDE_EN 1
+#define VLV_SOC_TDP_EN (1 << 1)
+#define VLV_BIAS_CPU_125_SOC_875 (6 << 2)
+#define CHV_BIAS_CPU_50_SOC_50 (3 << 2)
+
#define VLV_CZ_CLOCK_TO_MILLI_SEC 100000
/* vlv2 north clock has */
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 78c89ff..3689d0e 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5065,6 +5065,12 @@ static void cherryview_enable_rps(struct drm_device *dev)
GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_AVG);
+ /* Setting Fixed Bias */
+ val = VLV_OVERRIDE_EN |
+ VLV_SOC_TDP_EN |
+ CHV_BIAS_CPU_50_SOC_50;
+ vlv_punit_write(dev_priv, VLV_TURBO_SOC_OVERRIDE, val);
+
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
/* RPS code assumes GPLL is used */
@@ -5149,6 +5155,12 @@ static void valleyview_enable_rps(struct drm_device *dev)
I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
+ /* Setting Fixed Bias */
+ val = VLV_OVERRIDE_EN |
+ VLV_SOC_TDP_EN |
+ VLV_BIAS_CPU_125_SOC_875;
+ vlv_punit_write(dev_priv, VLV_TURBO_SOC_OVERRIDE, val);
+
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
/* RPS code assumes GPLL is used */
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
