Re: [PATCH v3] drm/i915: Add missing MacBook Pro models with dual channel LVDS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 30, 2015 at 03:28:11PM +0200, Lukas Wunner wrote:
> Single channel LVDS maxes out at 112 MHz. All 17" models with i915
> graphics had a resolution of 1920x1200 (193 MHz), necessitating dual
> channel LVDS. The 15" pre-retina models had either 1440x900 (106 MHz)
> or 1680x1050 (119 MHz), both versions used dual channel LVDS even
> though the smaller one would have fit into a single channel.
> 
> v2: Assume dual channel LVDS if the pixel clock necessitates it,
> eliminating the need to hardcode 17" models, suggested by Jani Nikula.

I would suggest splitting that into a separate patch. Otherwise it's
going to harder to revert either change separately, should the need
arise. So that part is
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

I have no clue about the Mac stuff so won't pretend to say anything
about that.

> 
> v3: Fix typo, thanks Joonas Lahtinen.
> 
> Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
> Tested-by: Lukas Wunner <lukas@xxxxxxxxx>
> Acked-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> ---
>  drivers/gpu/drm/i915/intel_lvds.c | 26 ++++++++++++++++++++++++--
>  1 file changed, 24 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 071b96d..417ccab 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -812,12 +812,28 @@ static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
>  static const struct dmi_system_id intel_dual_link_lvds[] = {
>  	{
>  		.callback = intel_dual_link_lvds_callback,
> -		.ident = "Apple MacBook Pro (Core i5/i7 Series)",
> +		.ident = "Apple MacBook Pro 15\" (2010)",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro6,2"),
> +		},
> +	},
> +	{
> +		.callback = intel_dual_link_lvds_callback,
> +		.ident = "Apple MacBook Pro 15\" (2011)",
>  		.matches = {
>  			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
>  			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
>  		},
>  	},
> +	{
> +		.callback = intel_dual_link_lvds_callback,
> +		.ident = "Apple MacBook Pro 15\" (2012)",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro9,1"),
> +		},
> +	},
>  	{ }	/* terminating entry */
>  };
>  
> @@ -847,6 +863,11 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
>  	if (i915.lvds_channel_mode > 0)
>  		return i915.lvds_channel_mode == 2;
>  
> +	/* single channel LVDS is limited to 112 MHz */
> +	if (lvds_encoder->attached_connector->base.panel.fixed_mode->clock
> +	    > 112999)
> +		return true;
> +
>  	if (dmi_check_system(intel_dual_link_lvds))
>  		return true;
>  
> @@ -1104,6 +1125,8 @@ void intel_lvds_init(struct drm_device *dev)
>  out:
>  	mutex_unlock(&dev->mode_config.mutex);
>  
> +	intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
> +
>  	lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder);
>  	DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
>  		      lvds_encoder->is_dual_link ? "dual" : "single");
> @@ -1118,7 +1141,6 @@ out:
>  	}
>  	drm_connector_register(connector);
>  
> -	intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
>  	intel_panel_setup_backlight(connector, INVALID_PIPE);
>  
>  	return;
> -- 
> 1.8.5.2 (Apple Git-48)
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux