Re: git pull] drm for v4.1-rc1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hmm. The odd Intel PCI resource mess is back.

Or maybe it never went away.

I get these when suspending. Things *work*, but it's really spamming
my logs a fair bit:

  i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  pci_bus 0000:01: Allocating resources
  pci_bus 0000:02: Allocating resources
  i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment

That resource is complete garbage. "flags 0x2" is not even a valid
flag value. I'm *guessing* it might be IORESOURCE_ROM_SHADOW, but if
that is valid, then it should also have have had the IORESOURCE_MEM
bit, and it doesn't.

(The low 8 bits of the resource flags depend on the high bits, which
is why I say that I'm "guessing" at that ROM_SHADOW bit. It could be
something else, like a IORESOURCE_MEM_CACHEABLE PnP bit - but that
should not show up for PCI, and "BAR 6" is normally the ROM resource,
so the ROM_SHADOW bit makes some sense.

The only place that sets IORESOURCE_ROM_SHADOW that I find is the x86
pci_fixup_video() function. That one checks for PCI_COMMAND_IO |
PCI_COMMAND_MEMORY in the PCI command word, though. Why are the other
bits not set?

Both i915/dri people and PCI people on the Cc. This warning does *not*
happen at bootup, but only at suspend time. So my suspicion is that
somebody messes with the PCI ROM resource, and disables it or
something, but the IORESOURCE_ROM_SHADOW never gets cleared. And then
because res->flags is non-zero, the PCI scanning code doesn't ignore
the resource.

Just before the whole bogus alignment check, the PCI code does

                if (!(r->flags) || r->parent)
                        continue;

(don't ask me about the odd parenthesis) which *should* have
triggered, but that IORESOURCE_ROM_SHADOW bit screws things up.

Anybody?

            Linus
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux