From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
This makes disabling planes more explicit.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
[anderco: fixed warning due to using drm_crtc instead of intel_crtc]
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_debugfs.c | 6 ++---
drivers/gpu/drm/i915/intel_display.c | 46 ++++++++++++++++++++++--------------
drivers/gpu/drm/i915/intel_drv.h | 1 +
3 files changed, 31 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 9c2b9e4..d263d0f 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3594,8 +3594,7 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
intel_display_power_get(dev_priv,
POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
- dev_priv->display.crtc_disable(&crtc->base);
- dev_priv->display.crtc_enable(&crtc->base);
+ intel_crtc_reset(crtc);
}
drm_modeset_unlock_all(dev);
}
@@ -3616,8 +3615,7 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
if (crtc->config->pch_pfit.force_thru) {
crtc->config->pch_pfit.force_thru = false;
- dev_priv->display.crtc_disable(&crtc->base);
- dev_priv->display.crtc_enable(&crtc->base);
+ intel_crtc_reset(crtc);
intel_display_power_put(dev_priv,
POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 12c02a6..1a0ec52 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -107,6 +107,8 @@ static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_cr
struct intel_crtc_state *crtc_state);
static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
int num_connectors);
+static void intel_crtc_enable_planes(struct drm_crtc *crtc);
+static void intel_crtc_disable_planes(struct drm_crtc *crtc);
static struct intel_encoder *intel_find_encoder(struct intel_connector *connector, int pipe)
{
@@ -3128,6 +3130,19 @@ static void intel_update_primary_planes(struct drm_device *dev)
}
}
+void intel_crtc_reset(struct intel_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+
+ if (!crtc->active)
+ return;
+
+ intel_crtc_disable_planes(&crtc->base);
+ dev_priv->display.crtc_disable(&crtc->base);
+ dev_priv->display.crtc_enable(&crtc->base);
+ intel_crtc_enable_planes(&crtc->base);
+}
+
void intel_prepare_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
@@ -3148,8 +3163,11 @@ void intel_prepare_reset(struct drm_device *dev)
* g33 docs say we should at least disable all the planes.
*/
for_each_intel_crtc(dev, crtc) {
- if (crtc->active)
- dev_priv->display.crtc_disable(&crtc->base);
+ if (!crtc->active)
+ continue;
+
+ intel_crtc_disable_planes(&crtc->base);
+ dev_priv->display.crtc_disable(&crtc->base);
}
}
@@ -4758,8 +4776,6 @@ intel_pre_disable_primary(struct drm_crtc *crtc)
static void intel_crtc_enable_planes(struct drm_crtc *crtc)
{
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
intel_enable_primary_hw_plane(crtc->primary, crtc);
intel_enable_sprite_planes(crtc);
intel_crtc_update_cursor(crtc, true);
@@ -4865,8 +4881,6 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
if (HAS_PCH_CPT(dev))
cpt_verify_modeset(dev, intel_crtc->pipe);
-
- intel_crtc_enable_planes(crtc);
}
/* IPS only exists on ULT machines and is tied to pipe A. */
@@ -4990,7 +5004,6 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
/* If we change the relative order between pipe/planes enabling, we need
* to change the workaround. */
haswell_mode_set_planes_workaround(intel_crtc);
- intel_crtc_enable_planes(crtc);
}
static void ironlake_pfit_disable(struct intel_crtc *crtc)
@@ -5020,8 +5033,6 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
if (!intel_crtc->active)
return;
- intel_crtc_disable_planes(crtc);
-
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->disable(encoder);
@@ -5084,8 +5095,6 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
if (!intel_crtc->active)
return;
- intel_crtc_disable_planes(crtc);
-
for_each_encoder_on_crtc(dev, crtc, encoder) {
intel_opregion_notify_encoder(encoder, false);
encoder->disable(encoder);
@@ -5829,8 +5838,6 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->enable(encoder);
-
- intel_crtc_enable_planes(crtc);
}
static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
@@ -5887,8 +5894,6 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->enable(encoder);
-
- intel_crtc_enable_planes(crtc);
}
static void i9xx_pfit_disable(struct intel_crtc *crtc)
@@ -5917,8 +5922,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
if (!intel_crtc->active)
return;
- intel_crtc_disable_planes(crtc);
-
/*
* On gen2 planes are double buffered but the pipe isn't, so we must
* wait for planes to fully turn off before disabling the pipe.
@@ -5982,9 +5985,11 @@ void intel_crtc_control(struct drm_crtc *crtc, bool enable)
intel_crtc->enabled_power_domains = domains;
dev_priv->display.crtc_enable(crtc);
+ intel_crtc_enable_planes(crtc);
}
} else {
if (intel_crtc->active) {
+ intel_crtc_disable_planes(crtc);
dev_priv->display.crtc_disable(crtc);
domains = intel_crtc->enabled_power_domains;
@@ -6019,6 +6024,7 @@ static void intel_crtc_disable(struct drm_crtc *crtc)
/* crtc should still be enabled when we disable it. */
WARN_ON(!crtc->state->enable);
+ intel_crtc_disable_planes(crtc);
dev_priv->display.crtc_disable(crtc);
dev_priv->display.off(crtc);
@@ -12258,8 +12264,10 @@ static int __intel_set_mode(struct drm_crtc *crtc,
intel_crtc_disable(&intel_crtc->base);
for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
- if (intel_crtc->base.state->enable)
+ if (intel_crtc->base.state->enable) {
+ intel_crtc_disable_planes(&intel_crtc->base);
dev_priv->display.crtc_disable(&intel_crtc->base);
+ }
}
/* crtc->mode is already used by the ->mode_set callbacks, hence we need
@@ -12307,6 +12315,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
update_scanline_offset(intel_crtc);
dev_priv->display.crtc_enable(&intel_crtc->base);
+ intel_crtc_enable_planes(&intel_crtc->base);
}
/* FIXME: add subpixel order */
@@ -14703,6 +14712,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
plane = crtc->plane;
to_intel_plane_state(crtc->base.primary->state)->visible = true;
crtc->plane = !plane;
+ intel_crtc_disable_planes(&crtc->base);
dev_priv->display.crtc_disable(&crtc->base);
crtc->plane = plane;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 4c48451..dc53f59 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -994,6 +994,7 @@ void intel_mark_busy(struct drm_device *dev);
void intel_mark_idle(struct drm_device *dev);
void intel_crtc_restore_mode(struct drm_crtc *crtc);
void intel_crtc_control(struct drm_crtc *crtc, bool enable);
+void intel_crtc_reset(struct intel_crtc *crtc);
void intel_crtc_update_dpms(struct drm_crtc *crtc);
void intel_encoder_destroy(struct drm_encoder *encoder);
int intel_connector_init(struct intel_connector *);
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
