From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Not sure which LDO programming sequence delay should be used for the CHV PHY, but the spec says that 600ns is "Used by default for initial bringup", and the BIOS seems to use that, so let's do the same. Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/i915_reg.h | 4 ++++ drivers/gpu/drm/i915/intel_runtime_pm.c | 2 ++ 2 files changed, 6 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 98588d5..977bad6 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1887,6 +1887,10 @@ enum skl_disp_power_wells { #define DPIO_PHY_STATUS (VLV_DISPLAY_BASE + 0x6240) #define DPLL_PORTD_READY_MASK (0xf) #define DISPLAY_PHY_CONTROL (VLV_DISPLAY_BASE + 0x60100) +#define PHY_LDO_DELAY_0NS 0x0 +#define PHY_LDO_DELAY_200NS 0x1 +#define PHY_LDO_DELAY_600NS 0x2 +#define PHY_LDO_SEQ_DELAY(delay, phy) ((delay) << (2*(phy)+23)) #define PHY_CH_SU_PSR 0x1 #define PHY_CH_DEEP_PSR 0x7 #define PHY_CH_POWER_MODE(mode, phy, ch) ((mode) << (6*(phy)+3*(ch)+2)) diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index 1f800f8..5cd8a51 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -1406,6 +1406,8 @@ static void chv_phy_control_init(struct drm_i915_private *dev_priv) * value. */ dev_priv->chv_phy_control = + PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY0) | + PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY1) | PHY_CH_POWER_MODE(PHY_CH_SU_PSR, DPIO_PHY0, DPIO_CH0) | PHY_CH_POWER_MODE(PHY_CH_SU_PSR, DPIO_PHY0, DPIO_CH1) | PHY_CH_POWER_MODE(PHY_CH_SU_PSR, DPIO_PHY1, DPIO_CH0); -- 2.0.5 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx