On ke, 2015-04-01 at 16:22 +0530, Animesh Manna wrote:
> From: "A.Sunil Kamath" <sunil.kamath@xxxxxxxxx>
>
> This patch just implements the basic enable and disable
> functions of DC5 state which is needed for both SKL and BXT.
>
> Its important to load respective CSR program before calling
> enable, which anyways will happen as CSR program is executed
> during boot.
>
> DC5 is a power saving state where hardware dynamically disables
> power well 1 and the CDCLK PLL and saves the associated registers.
>
> DC5 can be entered when software allows it, power well 2 is
> disabled, and hardware detects that all pipes are disabled
> or pipe A is enabled with PSR active.
>
> Its better to configure display engine to have power well 2 disabled before
> getting into DC5 enable function. Hence rpm framework will have to
> ensure to check status of power well 2 before calling gen9_enable_dc5.
>
> Rather dc5 entry criteria should be decided based on power well 2 status.
> If disabled, then call gen9_enable_dc5.
>
> v2: Replace HAS_ with IS_ check as per Daniel's review comments
>
> v3: Cleared the bits dc5/dc6 enable of DC_STATE_EN register
> before setting them as per Satheesh's review comments.
>
> v4: call POSTING_READ for every write to a register to ensure that
> its written immediately.
>
> v5: Modified as per review comments from Imre.
> - Squashed register definitions into this patch.
> - Finetuned comments and functions.
>
> v6:
> Avoid redundant writes in gen9_set_dc_state_debugmask_memory_up function.
>
> v7:
> 1] Rebase to latest.
> 2] Move all runtime PM functions defined in intel_display.c to
> intel_runtime_pm.c.
>
> v8: Rebased to drm-intel-nightly. (Animesh)
>
> Issue: VIZ-2819
> Signed-off-by: A.Sunil Kamath <sunil.kamath@xxxxxxxxx>
> Signed-off-by: Damien Lespiau <damien.lespiau@xxxxxxxxx>
> Signed-off-by: Animesh Manna <animesh.manna@xxxxxxxxx>
Reviewed-by: Imre Deak <imre.deak@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 11 ++++++++
> drivers/gpu/drm/i915/intel_runtime_pm.c | 47 +++++++++++++++++++++++++++++++++
> 2 files changed, 58 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 77faa2b..d064e95 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6794,6 +6794,17 @@ enum skl_disp_power_wells {
> #define CSR_MMIO_END_RANGE 0x8FFFF
> #define CSR_MAX_MMIO_COUNT 8
>
> +/*
> +* SKL DC
> +*/
> +#define DC_STATE_EN 0x45504
> +#define DC_STATE_EN_UPTO_DC5 (1<<0)
> +#define DC_STATE_EN_UPTO_DC6 (2<<0)
> +#define DC_STATE_EN_UPTO_DC5_DC6_MASK 0x3
> +
> +#define DC_STATE_DEBUG 0x45520
> +#define DC_STATE_DEBUG_MASK_MEMORY_UP (1<<1)
> +
> /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
> * since on HSW we can't write to it using I915_WRITE. */
> #define D_COMP_HSW (MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index ce00e69..bc6cee9 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -319,6 +319,53 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
> SKL_DISPLAY_MISC_IO_POWER_DOMAINS)) | \
> BIT(POWER_DOMAIN_INIT))
>
> +static void gen9_set_dc_state_debugmask_memory_up(
> + struct drm_i915_private *dev_priv)
> +{
> + uint32_t val;
> +
> + /* The below bit doesn't need to be cleared ever afterwards */
> + val = I915_READ(DC_STATE_DEBUG);
> + if (!(val & DC_STATE_DEBUG_MASK_MEMORY_UP)) {
> + val |= DC_STATE_DEBUG_MASK_MEMORY_UP;
> + I915_WRITE(DC_STATE_DEBUG, val);
> + POSTING_READ(DC_STATE_DEBUG);
> + }
> +}
> +
> +static void gen9_enable_dc5(struct drm_i915_private *dev_priv)
> +{
> + struct drm_device *dev = dev_priv->dev;
> + uint32_t val;
> +
> + WARN_ON(!IS_GEN9(dev));
> +
> + DRM_DEBUG_KMS("Enabling DC5\n");
> +
> + gen9_set_dc_state_debugmask_memory_up(dev_priv);
> +
> + val = I915_READ(DC_STATE_EN);
> + val &= ~DC_STATE_EN_UPTO_DC5_DC6_MASK;
> + val |= DC_STATE_EN_UPTO_DC5;
> + I915_WRITE(DC_STATE_EN, val);
> + POSTING_READ(DC_STATE_EN);
> +}
> +
> +static void gen9_disable_dc5(struct drm_i915_private *dev_priv)
> +{
> + struct drm_device *dev = dev_priv->dev;
> + uint32_t val;
> +
> + WARN_ON(!IS_GEN9(dev));
> +
> + DRM_DEBUG_KMS("Disabling DC5\n");
> +
> + val = I915_READ(DC_STATE_EN);
> + val &= ~DC_STATE_EN_UPTO_DC5;
> + I915_WRITE(DC_STATE_EN, val);
> + POSTING_READ(DC_STATE_EN);
> +}
> +
> static void skl_set_power_well(struct drm_i915_private *dev_priv,
> struct i915_power_well *power_well, bool enable)
> {
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
