Combined Valleyview, Haswell and Broadwell '*_modeset_global_pipes()'
into one function 'intel_modeset_global_pipes()'
v2:
- we don't modify 'disable_pipes', so passing this as a pointer
is removed (based on Ville's comment)
- introduced a new function 'intel_calc_cdclk()' that combines
routines from 'valleyview_calc_cdclk()' and 'haswell_calc_cdclk()'
Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 191 ++++++++++++++++-------------------
1 file changed, 88 insertions(+), 103 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7b97907..18a1262 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5179,66 +5179,62 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
intel_update_cdclk(dev);
}
-static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
+static int intel_calc_cdclk(struct drm_i915_private *dev_priv,
int max_pixclk)
{
- int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? 333333 : 320000;
- int limit = IS_CHERRYVIEW(dev_priv) ? 95 : 90;
+ int cdclk = 200000;
- /*
- * Really only a few cases to deal with, as only 4 CDclks are supported:
- * 200MHz
- * 267MHz
- * 320/333MHz (depends on HPLL freq)
- * 400MHz (VLV only)
- * So we check to see whether we're above 90% (VLV) or 95% (CHV)
- * of the lower bin and adjust if needed.
- *
- * We seem to get an unstable or solid color picture at 200MHz.
- * Not sure what's wrong. For now use 200MHz only when all pipes
- * are off.
- */
- if (!IS_CHERRYVIEW(dev_priv) &&
- max_pixclk > freq_320*limit/100)
- return 400000;
- else if (max_pixclk > 266667*limit/100)
- return freq_320;
- else if (max_pixclk > 0)
- return 266667;
- else
- return 200000;
-}
-
-/* compute the max pixel clock for new configuration */
-static int intel_mode_max_pixclk(struct drm_i915_private *dev_priv)
-{
- struct drm_device *dev = dev_priv->dev;
- struct intel_crtc *intel_crtc;
- int max_pixclk = 0;
+ if (IS_VALLEYVIEW(dev_priv)) {
+ int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? 333333 : 320000;
+ int limit = IS_CHERRYVIEW(dev_priv) ? 95 : 90;
+ /*
+ * Really only a few cases to deal with, as only 4 CDclks are supported:
+ * 200MHz
+ * 267MHz
+ * 320/333MHz (depends on HPLL freq)
+ * 400MHz (VLV only)
+ * So we check to see whether we're above 90% (VLV) or 95% (CHV)
+ * of the lower bin and adjust if needed.
+ *
+ * We seem to get an unstable or solid color picture at 200MHz.
+ * Not sure what's wrong. For now use 200MHz only when all pipes
+ * are off.
+ */
+ if (!IS_CHERRYVIEW(dev_priv) &&
+ max_pixclk > freq_320*limit/100)
+ cdclk = 400000;
+ else if (max_pixclk > 266667*limit/100)
+ cdclk = freq_320;
+ else if (max_pixclk > 0)
+ cdclk = 266667;
+ else
+ cdclk = 200000;
+ } else if (IS_HASWELL(dev_priv)) {
+ /*
+ * FIXME should also account for plane ratio
+ * once 64bpp pixel formats are supported.
+ */
+ if (max_pixclk > 540000)
+ cdclk = 675000;
+ else if (max_pixclk > 450000)
+ cdclk = 540000;
+ else if (max_pixclk > 337500 || !IS_HSW_ULX(dev_priv))
+ cdclk = 450000;
+ else
+ cdclk = 337500;
- for_each_intel_crtc(dev, intel_crtc) {
- if (intel_crtc->new_enabled)
- max_pixclk = max(max_pixclk,
- intel_crtc->new_config->base.adjusted_mode.crtc_clock);
+ /*
+ * FIXME move the cdclk caclulation to
+ * compute_config() so we can fail gracegully.
+ */
+ if (cdclk > dev_priv->max_cdclk_freq) {
+ DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+ cdclk, dev_priv->max_cdclk_freq);
+ cdclk = dev_priv->max_cdclk_freq;
+ }
}
- return max_pixclk;
-}
-
-static void valleyview_modeset_global_pipes(struct drm_device *dev,
- unsigned *prepare_pipes)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc;
- int max_pixclk = intel_mode_max_pixclk(dev_priv);
-
- if (valleyview_calc_cdclk(dev_priv, max_pixclk) == dev_priv->cdclk_freq)
- return;
-
- /* disable/enable all currently active pipes while we change cdclk */
- for_each_intel_crtc(dev, intel_crtc)
- if (intel_crtc->base.state->enable)
- *prepare_pipes |= (1 << intel_crtc->pipe);
+ return cdclk;
}
static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
@@ -5277,12 +5273,28 @@ static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND);
}
+/* compute the max pixel clock for new configuration */
+static int intel_mode_max_pixclk(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct intel_crtc *intel_crtc;
+ int max_pixclk = 0;
+
+ for_each_intel_crtc(dev, intel_crtc) {
+ if (intel_crtc->new_enabled)
+ max_pixclk = max(max_pixclk,
+ intel_crtc->new_config->base.adjusted_mode.crtc_clock);
+ }
+
+ return max_pixclk;
+}
+
static void valleyview_modeset_global_resources(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int max_pixclk = intel_mode_max_pixclk(dev_priv);
- int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk);
+ int req_cdclk = intel_calc_cdclk(dev_priv, max_pixclk);
if (req_cdclk != dev_priv->cdclk_freq) {
/*
@@ -8634,37 +8646,6 @@ static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
return max_pixel_rate;
}
-static int haswell_calc_cdclk(struct drm_i915_private *dev_priv,
- int max_pixel_rate)
-{
- int cdclk;
-
- /*
- * FIXME should also account for plane ratio
- * once 64bpp pixel formats are supported.
- */
- if (max_pixel_rate > 540000)
- cdclk = 675000;
- else if (max_pixel_rate > 450000)
- cdclk = 540000;
- else if (max_pixel_rate > 337500 || !IS_HSW_ULX(dev_priv))
- cdclk = 450000;
- else
- cdclk = 337500;
-
- /*
- * FIXME move the cdclk caclulation to
- * compute_config() so we can fail gracegully.
- */
- if (cdclk > dev_priv->max_cdclk_freq) {
- DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
- cdclk, dev_priv->max_cdclk_freq);
- cdclk = dev_priv->max_cdclk_freq;
- }
-
- return cdclk;
-}
-
static void haswell_set_cdclk(struct drm_device *dev, int cdclk)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -8787,21 +8768,33 @@ static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
cdclk, dev_priv->cdclk_freq);
}
-static void haswell_modeset_global_pipes(struct drm_device *dev,
- unsigned *prepare_pipes)
+static void intel_modeset_global_pipes(struct drm_device *dev,
+ unsigned *prepare_pipes,
+ unsigned disable_pipes)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc;
- int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
+ int max_pixclk;
+
+ /* this modeset is valid only for VLV, HSW, and BDW */
+ if (!IS_VALLEYVIEW(dev) && !IS_HASWELL(dev) && !IS_BROADWELL(dev))
+ return;
+
+ if (IS_VALLEYVIEW(dev))
+ max_pixclk = intel_mode_max_pixclk(dev_priv);
+ else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
+ max_pixclk = ilk_max_pixel_rate(dev_priv);
- if (haswell_calc_cdclk(dev_priv, max_pixel_rate) ==
- dev_priv->cdclk_freq)
+ if (intel_calc_cdclk(dev_priv, max_pixclk) == dev_priv->cdclk_freq)
return;
/* disable/enable all currently active pipes while we change cdclk */
for_each_intel_crtc(dev, crtc)
- if (crtc->base.enabled)
- *prepare_pipes |= 1 << crtc->pipe;
+ if (crtc->base.state->enable)
+ *prepare_pipes |= (1 << crtc->pipe);
+
+ /* may have added more to prepare_pipes than we should */
+ *prepare_pipes &= ~disable_pipes;
}
static void haswell_modeset_global_resources(struct drm_atomic_state *state)
@@ -8809,7 +8802,7 @@ static void haswell_modeset_global_resources(struct drm_atomic_state *state)
struct drm_device *dev = state->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
- int req_cdclk = haswell_calc_cdclk(dev_priv, max_pixel_rate);
+ int req_cdclk = intel_calc_cdclk(dev_priv, max_pixel_rate);
if (req_cdclk != dev_priv->cdclk_freq) {
if (IS_BROADWELL(dev))
@@ -11933,15 +11926,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
* mode set on this crtc. For other crtcs we need to use the
* adjusted_mode bits in the crtc directly.
*/
- if (IS_VALLEYVIEW(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev)) {
- if (IS_VALLEYVIEW(dev))
- valleyview_modeset_global_pipes(dev, &prepare_pipes);
- else
- haswell_modeset_global_pipes(dev, &prepare_pipes);
-
- /* may have added more to prepare_pipes than we should */
- prepare_pipes &= ~disable_pipes;
- }
+ intel_modeset_global_pipes(dev, &prepare_pipes, disable_pipes);
ret = __intel_set_mode_setup_plls(dev, modeset_pipes, disable_pipes);
if (ret)
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
