We make use of HW tracking for Selective update region and enable frame sync on
sink. We use hardware's hardcoded data values for frame sync and GTC.
v2: Add 3200x2000 resolution restriction with PSR2, move psr2_support to i915_psr
struct, add aux_frame_sync to independently control aux frame sync, rename the
TP2 TIME macro for 2500us (Rodrigo, Siva)
v3: Moving the resolution restriction to intel_psr_enable so that we check it
only once(Durga)
Cc: Durgadoss R <durgadoss.r@xxxxxxxxx>
Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
Signed-off-by: Sonika Jindal <sonika.jindal@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 2 ++
drivers/gpu/drm/i915/i915_reg.h | 14 ++++++++++++++
drivers/gpu/drm/i915/intel_dp.c | 15 +++++++++++++++
drivers/gpu/drm/i915/intel_psr.c | 38 +++++++++++++++++++++++++++++++++++++-
4 files changed, 68 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index eb38cd1..65d3dae 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -879,6 +879,8 @@ struct i915_psr {
struct delayed_work work;
unsigned busy_frontbuffer_bits;
bool link_standby;
+ bool psr2_support;
+ bool aux_frame_sync;
};
enum intel_pch {
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5b84ee6..0b42ef3 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2745,6 +2745,20 @@ enum skl_disp_power_wells {
#define EDP_PSR_DEBUG_MASK_MEMUP (1<<26)
#define EDP_PSR_DEBUG_MASK_HPD (1<<25)
+#define EDP_PSR2_CTL 0x6f900
+#define EDP_PSR2_ENABLE (1<<31)
+#define EDP_SU_TRACK_ENABLE (1<<30)
+#define EDP_MAX_SU_DISABLE_TIME(t) ((t)<<20)
+#define EDP_MAX_SU_DISABLE_TIME_MASK (0x1f<<20)
+#define EDP_PSR2_TP2_TIME_500 (0<<8)
+#define EDP_PSR2_TP2_TIME_100 (1<<8)
+#define EDP_PSR2_TP2_TIME_2500 (2<<8)
+#define EDP_PSR2_TP2_TIME_50 (3<<8)
+#define EDP_PSR2_TP2_TIME_MASK (3<<8)
+#define EDP_PSR2_FRAME_BEFORE_SU_SHIFT 4
+#define EDP_PSR2_FRAME_BEFORE_SU_MASK (0xf<<4)
+#define EDP_PSR2_IDLE_MASK 0xf
+
/* VGA port control */
#define ADPA 0x61100
#define PCH_ADPA 0xe1100
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 3967af1..b0ae45e 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3786,6 +3786,21 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
dev_priv->psr.sink_support = true;
DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
}
+
+ if (INTEL_INFO(dev)->gen >= 9 &&
+ (intel_dp->psr_dpcd[0] & DP_PSR2_IS_SUPPORTED)) {
+ uint8_t frame_sync_cap;
+
+ dev_priv->psr.sink_support = true;
+ intel_dp_dpcd_read_wake(&intel_dp->aux,
+ DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
+ &frame_sync_cap, 1);
+ dev_priv->psr.aux_frame_sync = frame_sync_cap ? true : false;
+ /* PSR2 needs frame sync as well */
+ dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
+ DRM_DEBUG_KMS("PSR2 %s on sink",
+ dev_priv->psr.psr2_support ? "supported" : "not supported");
+ }
}
/* Training Pattern 3 support, both source and sink */
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index b9f40c2..8d9ae0b 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -117,6 +117,19 @@ static void vlv_psr_setup_vsc(struct intel_dp *intel_dp)
I915_WRITE(VLV_VSCSDP(pipe), val);
}
+static void skl_psr_setup_su_vsc(struct intel_dp *intel_dp)
+{
+ struct edp_vsc_psr psr_vsc;
+
+ /* Prepare VSC Header for SU as per EDP 1.4 spec, Table 6.11 */
+ memset(&psr_vsc, 0, sizeof(psr_vsc));
+ psr_vsc.sdp_header.HB0 = 0;
+ psr_vsc.sdp_header.HB1 = 0x7;
+ psr_vsc.sdp_header.HB2 = 0x3;
+ psr_vsc.sdp_header.HB3 = 0xb;
+ intel_psr_write_vsc(intel_dp, &psr_vsc);
+}
+
static void hsw_psr_setup_vsc(struct intel_dp *intel_dp)
{
struct edp_vsc_psr psr_vsc;
@@ -165,6 +178,12 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
DP_PSR_ENABLE & ~DP_PSR_MAIN_LINK_ACTIVE);
+ /* Enable AUX frame sync at sink */
+ if (dev_priv->psr.aux_frame_sync)
+ drm_dp_dpcd_writeb(&intel_dp->aux,
+ DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
+ DP_AUX_FRAME_SYNC_ENABLE);
+
aux_data_reg = (INTEL_INFO(dev)->gen >= 9) ?
DPA_AUX_CH_DATA1 : EDP_PSR_AUX_DATA1(dev);
aux_ctl_reg = (INTEL_INFO(dev)->gen >= 9) ?
@@ -183,8 +202,10 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
val |= DP_AUX_CH_CTL_TIME_OUT_1600us;
val &= ~DP_AUX_CH_CTL_MESSAGE_SIZE_MASK;
val |= (sizeof(aux_msg) << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
- /* Use hardcoded data values for PSR */
+ /* Use hardcoded data values for PSR, frame sync and GTC */
val &= ~DP_AUX_CH_CTL_PSR_DATA_AUX_REG_SKL;
+ val &= ~DP_AUX_CH_CTL_FS_DATA_AUX_REG_SKL;
+ val &= ~DP_AUX_CH_CTL_GTC_DATA_AUX_REG_SKL;
I915_WRITE(aux_ctl_reg, val);
} else {
I915_WRITE(aux_ctl_reg,
@@ -232,6 +253,7 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+
uint32_t max_sleep_time = 0x1f;
/* Lately it was identified that depending on panel idle frame count
* calculated at HW can be off by 1. So let's use what came
@@ -255,6 +277,10 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT |
idle_frames << EDP_PSR_IDLE_FRAME_SHIFT |
EDP_PSR_ENABLE);
+
+ if (dev_priv->psr.psr2_support)
+ I915_WRITE(EDP_PSR2_CTL, EDP_PSR2_ENABLE |
+ EDP_SU_TRACK_ENABLE | EDP_PSR2_TP2_TIME_100);
}
static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
@@ -332,6 +358,7 @@ void intel_psr_enable(struct intel_dp *intel_dp)
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
if (!HAS_PSR(dev)) {
DRM_DEBUG_KMS("PSR not supported on this platform\n");
@@ -364,6 +391,15 @@ void intel_psr_enable(struct intel_dp *intel_dp)
if (HAS_DDI(dev)) {
hsw_psr_setup_vsc(intel_dp);
+ if (dev_priv->psr.psr2_support) {
+ /* PSR2 is restricted to work with panel resolutions upto 3200x2000 */
+ if (crtc->config->pipe_src_w > 3200 ||
+ crtc->config->pipe_src_h > 2000)
+ dev_priv->psr.psr2_support = false;
+ else
+ skl_psr_setup_su_vsc(intel_dp);
+ }
+
/* Avoid continuous PSR exit by masking memup and hpd */
I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP |
EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
--
1.7.10.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
