Re: [PATCH] drm/edid: set ELD for firmware and debugfs override EDIDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 26, 2015 at 10:42:00AM +0200, Jani Nikula wrote:
> If the user supplies EDID through firmware or debugfs override, the
> driver callbacks are bypassed and the connector ELD does not get
> updated, and audio fails. Set ELD for firmware and debugfs EDIDs too.
> 
> There should be no harm in gratuitously doing this for non HDMI/DP
> connectors, as it's still up to the driver to use the ELD, if any.
> 
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82349
> Reference: https://bugs.freedesktop.org/show_bug.cgi?id=80691
> Reported-by: Emil <emilsvennesson@xxxxxxxxx>
> Reported-by: Rob Engle <grenoble@xxxxxxxxx>
> Tested-by: Jolan Luff <jolan@xxxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>

Since it's harmless I wonder whether we shouldn't just do this in
drm_add_edid_modes unconditionally. But this looks like the right minimal
patch for -fixes, so Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>

Cheers, Daniel
> ---
>  drivers/gpu/drm/drm_edid_load.c    | 1 +
>  drivers/gpu/drm/drm_probe_helper.c | 1 +
>  2 files changed, 2 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c
> index 732cb6f8e653..4c0aa97aaf03 100644
> --- a/drivers/gpu/drm/drm_edid_load.c
> +++ b/drivers/gpu/drm/drm_edid_load.c
> @@ -287,6 +287,7 @@ int drm_load_edid_firmware(struct drm_connector *connector)
>  
>  	drm_mode_connector_update_edid_property(connector, edid);
>  	ret = drm_add_edid_modes(connector, edid);
> +	drm_edid_to_eld(connector, edid);
>  	kfree(edid);
>  
>  	return ret;
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index 6591d48c1b9d..3fee587bc284 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -174,6 +174,7 @@ static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connect
>  			struct edid *edid = (struct edid *) connector->edid_blob_ptr->data;
>  
>  			count = drm_add_edid_modes(connector, edid);
> +			drm_edid_to_eld(connector, edid);
>  		} else
>  			count = (*connector_funcs->get_modes)(connector);
>  	}
> -- 
> 2.1.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux