Re: [PATCH v2 5/9] drm/i915: Pass primary plane size to .update_primary_plane()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Looks good to me.

Reviewed-by: Sonika Jindal <sonika.jindal@xxxxxxxxx>

On Thursday 19 March 2015 07:58 PM, ville.syrjala@xxxxxxxxxxxxxxx wrote:
From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

In preparation to movable/resizeable primary planes pass the clipped
plane size to .update_primary_plane().

v2: Pass src size too and use it appropriately (Sonika)

Cc: Sonika Jindal <sonika.jindal@xxxxxxxxx>
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
  drivers/gpu/drm/i915/i915_drv.h      |  4 +-
  drivers/gpu/drm/i915/intel_display.c | 81 ++++++++++++++++++++++++------------
  2 files changed, 57 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ec23290..054be42 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -581,7 +581,9 @@ struct drm_i915_display_funcs {
  			  uint32_t flags);
  	void (*update_primary_plane)(struct drm_crtc *crtc,
  				     struct drm_framebuffer *fb,
-				     int x, int y);
+				     int x, int y,
+				     int src_w, int src_h,
+				     int crtc_w, int crtc_h);
  	void (*hpd_irq_setup)(struct drm_device *dev);
  	/* clock updates for mode set */
  	/* cursor updates */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5499c8e..2e9fdaa 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2482,7 +2482,9 @@ intel_find_plane_obj(struct intel_crtc *intel_crtc,
static void i9xx_update_primary_plane(struct drm_crtc *crtc,
  				      struct drm_framebuffer *fb,
-				      int x, int y)
+				      int x, int y,
+				      int src_w, int src_h,
+				      int crtc_w, int crtc_h)
  {
  	struct drm_device *dev = crtc->dev;
  	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -2514,23 +2516,22 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
dspcntr |= DISPLAY_PLANE_ENABLE; + WARN_ONCE(src_w != crtc_w || src_h != crtc_h,
+		  "primary plane doesn't support scaling\n");
+
  	if (INTEL_INFO(dev)->gen < 4) {
  		if (intel_crtc->pipe == PIPE_B)
  			dspcntr |= DISPPLANE_SEL_PIPE_B;
-
-		/* pipesrc and dspsize control the size that is scaled from,
-		 * which should always be the user's requested size.
-		 */
-		I915_WRITE(DSPSIZE(plane),
-			   ((intel_crtc->config->pipe_src_h - 1) << 16) |
-			   (intel_crtc->config->pipe_src_w - 1));
+		I915_WRITE(DSPSIZE(plane), ((crtc_h - 1) << 16) | (crtc_w - 1));
  		I915_WRITE(DSPPOS(plane), 0);
  	} else if (IS_CHERRYVIEW(dev) && plane == PLANE_B) {
-		I915_WRITE(PRIMSIZE(plane),
-			   ((intel_crtc->config->pipe_src_h - 1) << 16) |
-			   (intel_crtc->config->pipe_src_w - 1));
+		I915_WRITE(PRIMSIZE(plane), ((crtc_h - 1) << 16) | (crtc_w - 1));
  		I915_WRITE(PRIMPOS(plane), 0);
  		I915_WRITE(PRIMCNSTALPHA(plane), 0);
+	} else {
+		WARN_ONCE(crtc_w != intel_crtc->config->pipe_src_w ||
+			  crtc_h != intel_crtc->config->pipe_src_h,
+			  "primary plane size doesn't match pipe size\n");
  	}
switch (fb->pixel_format) {
@@ -2586,14 +2587,14 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
  	if (crtc->primary->state->rotation == BIT(DRM_ROTATE_180)) {
  		dspcntr |= DISPPLANE_ROTATE_180;
- x += (intel_crtc->config->pipe_src_w - 1);
-		y += (intel_crtc->config->pipe_src_h - 1);
+		x += (src_w - 1);
+		y += (src_h - 1);
/* Finding the last pixel of the last line of the display
  		data and adding to linear_offset*/
  		linear_offset +=
-			(intel_crtc->config->pipe_src_h - 1) * fb->pitches[0] +
-			(intel_crtc->config->pipe_src_w - 1) * pixel_size;
+			(src_h - 1) * fb->pitches[0] +
+			(src_w - 1) * pixel_size;
  	}
I915_WRITE(reg, dspcntr);
@@ -2611,7 +2612,9 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
static void ironlake_update_primary_plane(struct drm_crtc *crtc,
  					  struct drm_framebuffer *fb,
-					  int x, int y)
+					  int x, int y,
+					  int src_w, int src_h,
+					  int crtc_w, int crtc_h)
  {
  	struct drm_device *dev = crtc->dev;
  	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -2643,6 +2646,13 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc,
  	if (IS_HASWELL(dev) || IS_BROADWELL(dev))
  		dspcntr |= DISPPLANE_PIPE_CSC_ENABLE;
+ WARN_ONCE(src_w != crtc_w || src_h != crtc_h,
+		  "primary plane doesn't support scaling\n");
+
+	WARN_ONCE(crtc_w != intel_crtc->config->pipe_src_w ||
+		  crtc_h != intel_crtc->config->pipe_src_h,
+		  "primary plane size doesn't match pipe size\n");
+
  	switch (fb->pixel_format) {
  	case DRM_FORMAT_C8:
  		dspcntr |= DISPPLANE_8BPP;
@@ -2686,14 +2696,14 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc,
  		dspcntr |= DISPPLANE_ROTATE_180;
if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
-			x += (intel_crtc->config->pipe_src_w - 1);
-			y += (intel_crtc->config->pipe_src_h - 1);
+			x += (src_w - 1);
+			y += (src_h - 1);
/* Finding the last pixel of the last line of the display
  			data and adding to linear_offset*/
  			linear_offset +=
-				(intel_crtc->config->pipe_src_h - 1) * fb->pitches[0] +
-				(intel_crtc->config->pipe_src_w - 1) * pixel_size;
+				(src_h - 1) * fb->pitches[0] +
+				(src_w - 1) * pixel_size;
  		}
  	}
@@ -2747,7 +2757,9 @@ u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier, static void skylake_update_primary_plane(struct drm_crtc *crtc,
  					 struct drm_framebuffer *fb,
-					 int x, int y)
+					 int x, int y,
+					 int src_w, int src_h,
+					 int crtc_w, int crtc_h)
  {
  	struct drm_device *dev = crtc->dev;
  	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -2767,6 +2779,9 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
  		    PLANE_CTL_PIPE_GAMMA_ENABLE |
  		    PLANE_CTL_PIPE_CSC_ENABLE;
+ WARN_ONCE(src_w != crtc_w || src_h != crtc_h,
+		  "primary plane doesn't support scaling\n");
+
  	switch (fb->pixel_format) {
  	case DRM_FORMAT_RGB565:
  		plane_ctl |= PLANE_CTL_FORMAT_RGB_565;
@@ -2826,9 +2841,7 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
I915_WRITE(PLANE_POS(pipe, 0), 0);
  	I915_WRITE(PLANE_OFFSET(pipe, 0), (y << 16) | x);
-	I915_WRITE(PLANE_SIZE(pipe, 0),
-		   (intel_crtc->config->pipe_src_h - 1) << 16 |
-		   (intel_crtc->config->pipe_src_w - 1));
+	I915_WRITE(PLANE_SIZE(pipe, 0), ((src_h - 1) << 16) | (src_w - 1));
  	I915_WRITE(PLANE_STRIDE(pipe, 0), fb->pitches[0] / stride_div);
  	I915_WRITE(PLANE_SURF(pipe, 0), i915_gem_obj_ggtt_offset(obj));
@@ -2845,12 +2858,18 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
  {
  	struct drm_device *dev = crtc->dev;
  	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
if (dev_priv->display.disable_fbc)
  		dev_priv->display.disable_fbc(dev);
+ /* FIXME: this will go badly if the fb isn't big enough */
  	to_intel_crtc(crtc)->primary_enabled = true;
-	dev_priv->display.update_primary_plane(crtc, fb, x, y);
+	dev_priv->display.update_primary_plane(crtc, fb, x, y,
+					       intel_crtc->config->pipe_src_w,
+					       intel_crtc->config->pipe_src_h,
+					       intel_crtc->config->pipe_src_w,
+					       intel_crtc->config->pipe_src_h);
return 0;
  }
@@ -2885,7 +2904,11 @@ static void intel_update_primary_planes(struct drm_device *dev)
  			dev_priv->display.update_primary_plane(crtc,
  							       state->base.fb,
  							       state->src.x1 >> 16,
-							       state->src.y1 >> 16);
+							       state->src.y1 >> 16,
+							       drm_rect_width(&state->src) >> 16,
+							       drm_rect_height(&state->src) >> 16,
+							       drm_rect_width(&state->dst),
+							       drm_rect_height(&state->dst));
  		}
drm_modeset_unlock(&crtc->mutex);
@@ -12070,7 +12093,11 @@ intel_commit_primary_plane(struct drm_plane *plane,
  		dev_priv->display.update_primary_plane(crtc,
  						       state->base.fb,
  						       state->src.x1 >> 16,
-						       state->src.y1 >> 16);
+						       state->src.y1 >> 16,
+						       drm_rect_width(&state->src) >> 16,
+						       drm_rect_height(&state->src) >> 16,
+						       drm_rect_width(&state->dst),
+						       drm_rect_height(&state->dst));
  	}
  }

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux